Dez 13 2017

20% Rabatt auf Sailfish X – Jolla feiert independence day

Ja, die Nachricht kommt etwas verspätet 🙂

Finnland feierte ihr 100sten Unabhängigkeitsjahr (06.12.) . Aus diesen anlas gibt Jolla vom 05.12 bis 17.12.17 einen Rabatt auf das Sailfish X Image.  Das Image kann nur auf einem Sony Xperia X (F5121)* aufgespielt werden. Im Warenkorb müsst ihr den Voucher Gutscheincode „INDEPENDENCE“ eintragen. Der Preis wird von 49,90€ auf 39,92€ (Brutto) runter gerechnet. Anders als zu beginn bietet Jolla nun neben der Kreditkarten Zahlung auch PayPal-Zahlung an.

* Theoretisch funktioniert das Image auch auf einem Sony Xperia X Dual-Sim Version (F5122). Hier muss man nach dem aufspielen noch ein paar Modifikationen durchführen damit beide Sim-Karten Slots funktionieren.

Nov 13 2017

13.11.2017 – Firmware Update 2.1.3.7 (Kymijoki)

Firmware Update 2.1.3.7 (Kymijoki)

 

Das Update wurde bis für die Intex Aqua Fish & Turing Phone Geräte für alle Freigegeben. Was das Update beinhaltet könnt ihr HIER durchlesen.

Zur Info: Man kann das Intex Aqua Fish Software Seitig auf ein Jolla C ändern – natürlich weiterhin ohne Band 20 😉

Okt 31 2017

31.10.2017 – Firmware Update 2.1.3.7 (Kymijoki) – early access

Firmware Update 2.1.3.7 (Kymijoki) – early access

 

Die Firmware 2.1.3.5 erschien mit der Veröffentlichung des Sony Xperia X Images und es war zu dem Zeitpunkt ausschließlich nur für das Sony vorgesehen. Bis dato… Nun ist die Firmware für alle Jolla Geräte erschienen – Jolla 1, Jolla C, Jolla Tablet und das Sony Xperia X. Zunächst jedoch für alle die sich für das early access eingetragen haben. Für alle anderen wird das Update Mitte/ende November freigegeben.

 

Die Highlights

  • [Sony] Android Support Aktualisiert – z.B. Apps sollten nicht mehr spontan Neustarten, Kamera Funktion, Aptoide Icon Bug behoben
  • ambience „Flow“ was zunächst nur für das Sony gab wurde nun in allen Geräten hinzugefügt
  • Bluetooth Blueborne Sicherheitslücke wurde geschlossen
  • Webbrowser wurde für FullHD Display angepasst
  • [Sony] Kamera-Taste Funktion wurde in der Kamera App erweitert. Mit halb-drücken auf die Kamera -Taste Fokussiert man nun (zur Zeit nur mit aktivierten Fotoblitz)
  • WPA, kernel, connman DNS proxy Sicherheitslücken geschlossen

 

release notes:

Accounts

Aliendalvik (Xperia X only)

  • Updated Android Support of Xperia X from version 1.0.75-1 1.0.82-1 (no update for other devices but Xperia X), fixing:
  • „Waiting for connection“ issue fixed in case of Facebook Messenger.
  • Restarting of Android Support fixed.
  • Aptoide app icon should now appear in the app grid after installation of it.
  • Android apps can recover mobile data connection.
  • Camera keeps working now also after using it in some Android apps.
  • Android market place installations again in Startup Wizard.

Ambiences

  • New ambience by the name „Flow“ introduced (the default on Sailfish X, available from Top Menu on other devices).

Bluetooth

  • Blueborne fixed (on all Sailfish devices).

Browser

  • Fixed the issue of detecting Jolla Browser as a mobile browser on some Chinese websites (already deployed as an OTA update from browser.sailfishos.org).
  • Browser configuration tuned to be more suitable for FullHD display.

Camera

  • Media Booster added to all Sailfish OS devices equipped with 2GB of memory or more to speed up startup times.
  • Xperia X: hardware shutter button now supported, press half-way to focus.

Connectivity

  • Connectivity breaking on many apps when switching from mobile data to WLAN fixed.
  • Ofono and connman logs protected from unauthorized access.

Device management (MDM)

  • Email provisioning and SSL certificates handling introduced.

Home screen

  • Swiping between lock screen and device lock keypad from both left and right allowed (proposed by a community member).
  • Running app is closed when it is uninstalled.
  • Homescreen layouts polished for higher resolution displays.
  • Device backspace is easier to press now.

HW adaptation (Xperia X only)

  • Flashable images for Xperia are packed to zip now (instead of tar.bz2) to make extracting easier on Windows.
  • Support for Sailfish X installation to Xperia X using Windows PC.
  • Support for Sailfish X installation to Xperia X using Linux PC.
  • Support for Sailfish X installation to Xperia X using Mac.

Mediaplayer

  • Switched OMXCodec for MediaCodecSource for video recording.

Security

  • WPA security issues: CVE-2017-13077, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13082, CVE-2017-13086, CVE-2017-13087, CVE-2017-13088.
  • kernel: CVE-2016-4485, CVE-2016-5244.
  • Blueborne: CVE-2017-0781, CVE-2017-0782, CVE-2017-0783, CVE-2017-0785; CVE-2017-1000251, CVE-2017-1000250.
  • connman DNS proxy: CVE-2017-12865.

Settings

  • Regression with low disk notification not opening Storage settings fixed.
  • Internet calling tone until the VOIP feature is officially supported in the OS.

Start-up wizard

  • Installing Android app stores possible.

Issues reported by the community at together.jolla.com and fixed in this update

Known issues

  • After entering an incorrect WLAN (WPA) password the device may not present a new password dialog but keeps searching and using the incorrect password. In this case stop the search, turn WLAN off and on, and search again: the password dialog appears.
  • Bluetooth pairing may fail with some car models. Sometimes synchronizing the phonebook may fail, too.
  • VPN is still at beta level.
  • Two of the Utlities do not work currently.
  • New pictures sometimes appear at the bottom of Gallery.
  • Reliance Jio SIM cards (India) work in SIM slot #2 only according to some reports. We are not aware of similar issues in other networks.

Known issues specific to Xperia X

  • Manual network/carrier search lists all networks by the same name (the name of the SIM provider). Use automatic search. If not possible, you need to try several items in the manual search results, unfortunately. The top most item is not necessarily the one that can serve you.
  • Mobile data connectivity: In some cases using „Prefer 2G“ for a while, then reverting to „Prefer 4G“, may help.
  • VPN does not work.
  • Bluetooth: problems with car equiment, some audio devices and computers.
  • Waking up the device by double-tap does not work
  • New pictures may appear at the end of the Gallery (the fix is being prepared)
  • Sensors:
    • not working: fingerprint, barometer, step counter.
    • compass (or gyro?) working in Google Maps, not yet natively.
  • Internet sharing (WLAN hotspot, tethering) does not work but the hotspot can be controlled at the command line: help article (LINK: https://jolla.zendesk.com/hc/en-us/articles/115013777068 ).
  • Issues with video playback and video recording (less than before).
  • FM radio missing.
  • Even though all CPU cores get eventually enabled, foreground apps do not always run on the big cores.

Komplette Changelog

Packages removed

  • sailfish-devicelock-fpd
  • sailfish-devicelock-fpd – 0.0.7-10.5.1.jolla
  • sailfish-fpd
  • sailfish-fpd – 0.1.1-10.1.4.jolla

Packages modified

PackageKit

  • Updated : 0.8.9+92-1.29.2 — 0.8.9+93-1.30.1
  • [PackageKit] Accept also overridden architecture for local-install packages.

    aliendalvik

  • Updated : 1.0.75-1 — 1.0.82-1
  • Fix a regression introduced in the previous change.
  • Fix „Waiting For Network“ issue in FB Messenger.
  • Fix a regression with picture capturing/video recording in certain apps. (i.e. Instagram).
  • Fix video recording in certain apps (i.e. Whatsapp, FB Messenger).
  • Fix connecitivty issues in certain apps.
  • Delay service started signal until settings listener is started
  • Fix an issue where aliendalvik would not properly restart.

    ambienced

  • Updated : 0.27.4-10.51.2.jolla — 0.28.0-10.52.2.jolla
  • [ambiences] Allow to suppres project warning when missing ambience- name prefix.

    apkd

  • Updated : 0.7.27-10.35.1.jolla — 0.7.28-10.36.2.jolla
  • Unmet requirements: libsystemsettings.so.0
  • [apkd] Avoid unnecessary x-jolla.settings notification category.

    apkd-l10n

  • Updated : 1.64-10.30.1.jolla — 1.67.1-10.33.1.jolla
  • [l10n] Branched apkd from version 1.67
  • [l10n] Commit from Jolla localisation: 35 of 40 strings translated (0 need review).
  • [tpl] translation templates update for 0.7.29
  • [l10n] Commit from Jolla localization: 40 of 40 strings translated (0 need review).
  • [tpl] translation templates update for 0.7.28

    bluetooth-rfkill-event

  • Updated : 1.0.5-10.1.4.jolla — 1.0.6-10.2.1.jolla
  • [bluetooth-rfkill-event] Enable new switches for hciattach.
  • [bluetooth-rfkill-event] Support hciattach for patch downloading.
  • [packaging] Add hciattch variant packaging.
  • [service] Accept hciattach variant env file as well.

    bluez

  • Updated : 4.101+git74-1.31.3 — 4.101+git75-1.33.1
  • [bluez] Patch for CVE-2017-1000250. Fixes MER#1828

    bluez5

  • Updated : 5.45+git1-1.4.2 — 5.47+git1-1.8.1
  • [sailfish] sdp: Fix Out-of-bounds heap read in service_search_attr_req function.
  • [sailfish] Update packaging and update to Bluez 5.47.

    buteo-mtp-qt5

  • Updated : 0.4.21-1.24.2 — 0.4.22-1.25.1
  • [fsstorage] Avoid creating files with privileged gid.

    connman

  • Updated : 1.31+git37.4-1.42.1 — 1.31+git44-1.41.1
  • Binaries removed : connman-tracing
  • [connman] Added __connman_plugin_foreach()
  • [connman] Allow to manage logs of binary plugins.
  • [connman] Enable code coverage for test-dnsproxy
  • [connman] Renamed __connman_dbg into connman_log
  • [rpm] Use _smp_mflags instead of jobs
  • [connman] Added /wakeup-timer/cancel-timeout-within-callback test
  • [connman] Avoid use after free when wakeup timers get canceled.
  • [connman] wakeup_timer: Only run debug_timeouts() if debug log is on
  • [connman] wifi: Don’t immediately report INVALID_KEY for auto connects.
  • [vpn] Enable debuglog plugin for connman-vpnd.
  • [connman] Reset service error if user input is cancelled.
  • [connman] CVE-2017-12865: Stack overflow in dnsproxy.
  • [connman] Dropped connman-tracing package
  • [connman] service: Fix possible memory leak
  • [connman] VPN issues.
  • [connman] Handle NULL network in request_input_cb.
  • [connman] Slight optimization of wakeup timers
  • [test] Improved sailfish_wakeup_timer coverage

    connman-qt5

  • Updated : 1.2.3-1.37.1 — 1.2.4-1.38.1
  • [connman-qt] Expose the NetworkManager CreateService function.

    crash-reporter

  • Updated : 1.13.3-10.35.3.jolla — 1.13.6-10.37.1.jolla
  • [crash-reporter] Fix endurance and journal spy not working with current Systemd.
  • [crash-reporter] Ensure notifications with body have an action
  • [crash-reporter] Do not suppress all log messages by default
  • [crash-reporter] Honour QT_MESSAGE_PATTERN
  • [crash-reporter] Suppress debug messages by default.
  • [crash-reporter] Use categorized log messages.

    csd

  • Updated : 0.9.2-10.41.1.jolla — 0.9.3-10.42.1.jolla
  • Unmet requirements: libsystemsettings.so.0
  • [csd] Don’t show MDM banner incorrectly.

    csd-l10n

  • Updated : 1.47-10.25.1.jolla — 1.51.1-10.29.1.jolla
  • [l10n] Branched csd from version 1.51
  • [l10n] Commit from Jolla localisation: 467 of 467 strings translated (0 need review).
  • [tpl] translation templates update for 0.9.3

    dbuslog-tools

  • Updated : 1.0.8-1.1.4 — 1.0.9-1.2.1
  • [libdbuslog] Move #include <glib-object.h> to private header files</glib-object.h>
  • [libdbuslog] Restrict access to the log by default.

    declarative-transferengine-qt5-l10n

  • Updated : 1.57-10.36.1.jolla — 1.58-10.37.1.jolla
  • [l10n] Commit from Jolla localization: 22 of 22 strings translated (0 need review).

    diffutils

  • Updated : 2.8.1-1.1.5 — 2.8.1-1.2.1
  • Binaries added : diffutils-doc – 2.8.1-1.2.1
  • Split documentation into subpackage.

    droid-config-f5121

  • Updated : 0.0.38-10.6.6.jolla — 0.5.2-10.10.1.jolla
  • [f5121] Show reboot dialog on SIM removal.
  • [camera] Drop video recording to 1080p, as we’re dropping frames at 4k.
  • [flashing] Add more comments for script execution.
  • [flashing] Improve windows flash script error checks.
  • [flashing] Fix issues on macOS use of flash.sh.
  • [droid-config-f5121] Support ISO 800.
  • [flash] Defer unlocking instructions to Sony website.
  • [win] Add windows EOL conversion.
  • [win] Convert text files to DOS format for easier reading on Windows.
  • [win] Escape special characters on echo.
  • [f5121] Fix packaging for removed and renamed files.
  • [flash] Update extracting and flashing instructions. Remove incomplete Windows fastboot driver.
  • [flash] Update flash scripts and documentation.
  • [oem] Tighten up device and blob image checking.
  • [f5121] Vendor binaries are now under /odm (handled by dhd). MER#1824
  • [f5121] Add mapplauncherd-booster-silica-qt5-media for default configuration.
  • [camera] Add focus modes to front camera.
  • [flashing] Improve flashing guidance.
  • [f5121] Linux: flashing the vendor image. MER#1821
  • [f5121] Make version comparison more robust. MER#1821
  • [flashing] Improve windows flashing script
  • [f5121] Mount oem partition instead of cache to /system/vendor.
  • [flashing] Improve guidance.
  • [flashing] Improve linux flashing script to match windows version.
  • [ks] Make .zip instead of .tar.bz2.
  • [vendor] Flash the vendor blob image.
  • [f5121] Pull camera key handling from upstream. Contributes to MER#1817
  • [f5121] Ship hybris-recovery.img in the installation tarball. MER#1819
  • [lvm] Handle cases when partition is already minimal. MER#1820
  • [zypp] Perform systemCheck only on OBS. MER#1807
  • [f5121] Check unlocked device on win flashing.
  • [f5121] Fix windows flashing script.
  • [config] Use proper card profile with pulseaudio.
  • [dhc] Upgrade droid-configs-device from upstream
  • [f5121] Add windows flashing support.
  • [f5121] Update latest fastboot driver from upstream.
  • [flash-win] Check installed android version.
  • [bluetooth] Copy bt mac address so system settings can find the address.
  • [f5121] Add configuration for bluetooth.
  • [f5121] Change xt9 from preload to Imager feature.
  • [f5121] Remove jolla-store-apps from Imager features.
  • [patterns] Add bluetooth-rfkill-event-hciattach.
  • [dhc] Enable community adaptations also for productised devices.
  • [f5121] Adjust touch screen feedback volume.
  • [f5121] Upgrade upstream droid-config device.

    droid-config-l500d

  • Updated : 0.11.1-10.109.5.jolla — 0.11.2-10.109.4.jolla
  • [l500d] fix aliendalvik-feature and aliendalvik to suggested feature.

    droid-flashing-tools

  • Updated : 0.0.2-10.1.1.jolla — 0.0.3-10.2.1.jolla
  • [windows] Update windows fastboot binary.

    droid-hal-f5121

  • Updated : 0.1.5-10.1.1.jolla — 0.3.2-10.7.1.jolla
  • [dhd] Update latest dhd upstream to get rsync back. MER#1824
  • [manifest] Fix stray commit. MER#1824
  • [bionic] linker: handle files under /odm. MER#1824
  • [bionic] Necessary symbols to make Android 7 vendor binaries compatible
  • [device_sony] Build doesn’t require vendor SW binaries anymore
  • [device_sony] Transition from /system/vendor to /odm. MER#1824
  • [dhd] Build doesn’t require vendor SW binaries anymore
  • [hardware_libhardware] Reference files also under /odm. MER#1824
  • [hardware_qcom_audio] Better handling of primary output.
  • [hardware_qcom_audio] Reset primary output when closing stream.
  • [hardware_ril] Necessary protocol backports to make Android 7 vendor binaries compatible
  • [OMX] Also add hybris camera sound fix. MER#1754
  • [OMX] Revert recent codec lockdown to enable video recording. MER#1754
  • [system_core] Add /odm to LD_LIBRARY_PATH. MER#1824
  • [system_core] Better support transition to Android 7 BSP
  • [hardware_qcom_audio] Reset primary output when closing stream.
  • [kernel_sony_msm] Upstream patch for CVE-2017-1000251.
  • [device-sony-suzu] Now has hybris patches. MER#1812
  • [f5121] Add tagged-manifest.xml. MER#1812
  • [f5121] BSP update to 6.0.1_r80
  • [f5121] Start building from opensourced repos on github. MER#1812
  • [device-sony-loire] Enable ’normal‘ cpuquiet profile on boot, or else only two cores are used.
  • [f5121-device_sony_loire] Lipstick needs read permisison for rfkill device.
  • [f5121-kernel_sony_msm] Use bluesleep with bluetooth driver.
  • [f5121-system_core] Load system properties before \“on ready\“ trigger.
  • [f5121-kernel_sony_msm] Enable core dumps.
  • [f5121-device_sony_suzu] revert PR #1 (a leftover of a cancelled update from r79 to r80) in attempt to fix OBS build.
  • [f5121-device_sony_suzu] Re-enable doubletap gesture detection.
  • [f5121-kernel_sony_msm] Re-enable doubletap gesture detection.

    droid-hal-l500d

  • Updated : 0.0.78-10.41.1.jolla — 0.0.79-10.43.1.jolla
  • [l500d-kernel] Security: upstream fix for CVE-2016-4485.
  • [l500d-kernel] Security: upstream fix for CVE-2016-5244.
  • [l500d-kernel] Upstream patch for CVE-2017-1000251.

    droid-hal-p4903

  • Updated : 0.0.38-10.5.1.jolla — 0.0.39-10.6.1.jolla
  • [p4903-kernel] Upstream patch for CVE-2017-1000251.

    droid-hal-tbj

  • Updated : 0.0.38-10.15.1.jolla — 0.0.39-10.17.1.jolla
  • [tbj-kernel] Security: upstream fix for CVE-2016-4485.
  • [tbj-kernel] Security: upstream fix for CVE-2016-5244.
  • [tbj-kernel] Upstream patch for CVE-2017-1000251.

    droid-src-f5121

  • Updated : 0.0.1-10.1.1.jolla — 0.3.1-10.4.1.jolla
  • [rpm] Always run precheckin.sh 😛 MER#1824
  • [bionic] linker: handle files under /odm. MER#1824
  • [bionic] Necessary symbols to make Android 7 vendor binaries compatible
  • [device_sony] Build doesn’t require vendor SW binaries anymore
  • [device_sony] Transition from /system/vendor to /odm. MER#1824
  • [hardware_libhardware] Reference files also under /odm. MER#1824
  • [hardware_qcom_audio] Better handling of primary output.
  • [hardware_ril] Necessary protocol backports to make Android 7 vendor binaries compatible
  • [rpm] Build doesn’t require vendor SW binaries anymore
  • [system_core] Better support transition to Android 7 BSP
  • [f5121] Add tagged-manifest.xml. MER#1812
  • [f5121] BSP update to 6.0.1_r80
  • [f5121] Start building from opensourced repos on github. MER#1812

    droid-system-f5121

  • Updated : 0.0.3.1-10.3.1.jolla — 0.2-10.5.1.jolla
  • [f5121] Ensure smooth transition to /odm. MER#1824
  • [f5121] Quick fix build. MER#1812
  • [f5121] Build correct arch RPMs on OBS. MER#1812
  • [f5121] Add additional make targets to complete system partition.
  • [f5121] BSP update to 6.0.1_r80
  • [f5121] Fix local build.
  • [f5121] Remove non-redist binaries.
  • [f5121] Start building from opensourced repos on github. MER#1812
  • [f5121] Built with latest sony repos (incl new bt-fm) and no blobs.

    droid-system-l500d

  • Updated : 0.0.27-10.17.1.jolla — 0.0.28-10.18.1.jolla
  • [l500d] Add rpmlintrc file.

    droid-system-p4903

  • Updated : 0.0.7-10.3.1.jolla — 0.0.8-10.4.1.jolla
  • [p4903] Add rpmlintrc file.

    droidmedia

  • Updated : 0.20170510.2-10.13.1.jolla — 0.20170921.1-10.17.1.jolla
  • Fix recorder audio. Fixed

  • [recorder] Switch OMXCodec for MediaCodecSource for video recording.
  • [android7] Test Android 7 support.
  • [cleanup] Move/copy all fake services to /services to reduce all the #ifs.

    dsme

  • Updated : 0.78.1-1.4.2 — 0.78.2-1.5.1
  • [abootsettings] Cast off_t for debug log (aarch64).

    embedlite-components-qt5

  • Updated : 1.19.28-10.5.1.jolla — 1.19.29-10.6.2.jolla
  • [rpm] Increment package version and dependencies.

    eventsview-extensions

  • Updated : 0.0.32-10.12.1.jolla — 0.0.33-10.13.1.jolla
  • [eventsview-extensions] Don’t elide Tweets.

    exempi

  • Updated : 2.3.0-1.2.3 — 2.4.3-1.3.1
  • [exempi] Upgrade exempi to 2.4.3 and fix generated arm binaries for aarch64.

    feature-xt9

  • Updated : 0.0.4-10.4.1.jolla — 0.0.5-10.5.1.jolla
  • Binaries added : patterns-sailfish-xt9 – 0.0.5-10.5.1.jolla
  • Binaries removed : feature-xt9-patterns
  • [patterns] Add meta pattern for xt9.
  • [patterns] Drop patterns as those are not used anymore.

    fontconfig

  • Updated : 2.12.1-1.3.3 — 2.12.4-1.4.1
  • [fontconfig] Update to 2.12.4. Contributes to MER#1697

    freetype

  • Updated : 2.6.3-1.2.2 — 2.8.0-1.3.1
  • [freetype] Update to 2.8.0. Contributes to MER#1697
  • [packaging] Drop use of pushd/popd.
  • [packaging] Update freetype to version 2.7.0. Contributes to MER#1697
  • [patch] Rebased a patch to new version of freetype.

    gstreamer1.0-droid

  • Updated : 0.20170510.0-10.16.1.jolla — 0.20170918.0-10.17.1.jolla
  • [gst-droid] Add a fallback for when I420ColorConverter.so isn’t installed.

    hybris-libsensorfw-qt5

  • Updated : 0.9.2.1-10.29.1.jolla — 0.9.4-10.28.1.jolla
  • [hybris-adaptors] Select 1st sensor variant for each sensor type.
  • [hybris-adaptors] Use wakelock to ensure proximity data io.
  • [sensorfw] Add hybrispressureadaptor. Contributes to MER#1649.
  • [sensorfw] Various small fixes to comments, defines and adaptor queries. Contributes to MER#1649.

    jolla-calendar

  • Updated : 0.6.28-10.47.1.jolla — 0.6.31-10.49.1.jolla
  • [jolla-calendar] Move some dependencies to components package.
  • [jolla-calendar] Cleanup main page list item components.
  • [calendar] Widget: avoid ’show more‘ button turning into one item.

    jolla-calendar-l10n

  • Updated : 1.107-10.33.1.jolla — 1.108-10.34.1.jolla
  • [l10n] Commit from Jolla localisation: 80 of 80 strings translated (0 need review).
  • [tpl] translation templates update for 0.6.29
  • [tpl] translation templates update for 0.6.30

    jolla-camera

  • Updated : 0.4.22-10.63.1.jolla — 0.4.27-10.67.1.jolla
  • Unmet requirements: libsystemsettings.so.0
  • [camera] Basic support for capture and focus keys.
  • [jolla-camera] Set highlight move duration.
  • [jolla-camera] Add microphone policy handling.
  • [rpm] Increment package version and update requirements.
  • [jolla-camera] Add disabled by MDM banners.
  • [jolla-camera] Fix notification missing the intended attributes.

    jolla-camera-l10n

  • Updated : 1.126-10.56.1.jolla — 1.132.1-10.61.1.jolla
  • [l10n] Branched jolla-camera from version 1.132
  • [l10n] Commit from Jolla localization: 56 of 56 strings translated (0 need review).
  • [tpl] translation templates update for 0.4.25
  • [tpl] translation templates update for 0.4.26
  • [l10n] Commit from Jolla localisation: 54 of 55 strings translated (0 need review).
  • [tpl] translation templates update for 0.4.24

    jolla-common-configurations

  • Updated : 0.7.15-10.63.1.jolla — 0.7.16-10.64.1.jolla
  • [ngfd] Use proper vibra effect for clock.

    jolla-contacts-l10n

  • Updated : 1.116-10.62.1.jolla — 1.117.1-10.65.1.jolla
  • [l10n] Branched jolla-contacts from version 1.117
  • [l10n] Commit from Jolla localization: 152 of 154 strings translated (0 need review).

    jolla-devicelock

  • Updated : 0.2.12.1-10.33.1.jolla — 0.2.14-10.32.2.jolla
  • Unmet requirements: libsystemsettings.so.0
  • [jolla-devicelock] Change default device lock timeout to immediate.
  • [spec] Use _smp_mflags instead of jobs macro.
  • [devicelock] Fix an error where a security code be set when changing a config value.
  • [devicelock] Reset unlock attempt counter on upgrade.
  • Updated : 0.2.4-10.31.3.jolla — 0.2.5-10.32.1.jolla
  • [tones] Hide internet calling tone until the feature is supported in the OS.
  • Updated : 1.72-10.44.1.jolla — 1.74-10.46.1.jolla
  • [l10n] Commit from Jolla localization: 33 of 33 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.5
  • [l10n] Commit from Jolla localization: 35 of 35 strings translated (0 need review).
  • Updated : 0.0.10.1-10.6.1.jolla — 0.0.11-10.5.2.jolla
  • [jolla-gallery-extensions] Migrate to Dropbox V2 API.

    jolla-keyboard

  • Updated : 0.6.11-10.60.1.jolla — 0.6.12-10.61.1.jolla
  • [jolla-keyboard] Avoid unnecessary notification category.

    jolla-keyboard-l10n

  • Updated : 1.35-10.26.1.jolla — 1.36-10.27.1.jolla
  • [l10n] Commit from Jolla localisation: 15 of 15 strings translated (0 need review).
  • [tpl] translation templates update for 0.6.12

    jolla-messages

  • Updated : 0.6.59.1-10.76.1.jolla — 0.6.61-10.75.1.jolla
  • [jolla-messages] Remove unnecessary category files.
  • [messages] Restore visiblity of previous messages when returning to a draft.

    jolla-messages-l10n

  • Updated : 1.120-10.65.1.jolla — 1.124.1-10.69.1.jolla
  • [l10n] Branched jolla-messages from version 1.124
  • [l10n] Commit from Jolla localization: 92 of 92 strings translated (0 need review).
  • [tpl] translation templates update for 0.6.60
  • [tpl] translation templates update for 0.6.61

    jolla-settings

  • Updated : 0.12.32-10.52.2.jolla — 0.12.34-10.53.1.jolla
  • [settings] Clean up Settings components.
  • [jolla-settings] Avoid notification category just for transient state.

    jolla-settings-accounts

  • Updated : 0.3.17.1-10.91.1.jolla — 0.3.21.1-10.93.1.jolla
  • Binaries removed : jolla-settings-accounts-extensions-younited
  • Unmet requirements: libsystemsettings.so.0
  • [jolla-settings-accounts-extensions] Update Dropbox account flow.
  • [jolla-settings-accounts] Fix jolla accounts host name.
  • [jolla-settings-accounts] Prevent editing of read-only accounts.
  • [jolla-settings-accounts-extensions] Update Dropbox provider.
  • [jolla-settings-accounts] Allow selecting sync direction for cdav accounts.

    jolla-settings-accounts-l10n

  • Updated : 1.160-10.76.1.jolla — 1.166.1-10.80.1.jolla
  • [l10n] Branched jolla-settings-accounts from version 1.166
  • [l10n] Commit from Jolla localization: 338 of 338 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.21
  • [l10n] Commit from Jolla localisation: 337 of 338 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.20
  • [l10n] Commit from Jolla localization: 332 of 333 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.18
  • [tpl] translation templates update for 0.3.19

    jolla-settings-l10n

  • Updated : 1.57-10.40.1.jolla — 1.58-10.41.1.jolla
  • [l10n] Commit from Jolla localization: 9 of 9 strings translated (0 need review).
  • [tpl] translation templates update for 0.12.34

    jolla-settings-networking

  • Updated : 0.4.7.1-10.85.1.jolla — 0.4.10-10.84.2.jolla
  • [jolla-settings-networking] Open Connection Selector when dimmed mobile data switch is tapped.
  • [jolla-settings-networking] Respect MobileNetworkSettingsEnabled policy.
  • [jolla-settings-networking] Respect mobile network settings policy.
  • [jolla-settings-networking] Align mobile data wifi tethering code paths.
  • [jolla-settings-networking] Cleanup Wlan enable switch and main page.

    jolla-settings-networking-l10n

  • Updated : 1.185-10.69.1.jolla — 1.189.1-10.73.1.jolla
  • [l10n] Branched jolla-settings-networking from version 1.189
  • [l10n] Commit from Jolla localisation: 287 of 374 strings translated (5 need review).
  • [tpl] translation templates update for 0.4.9

    jolla-settings-sailfishos-l10n

  • Updated : 1.62-10.34.1.jolla — 1.63-10.35.1.jolla
  • [l10n] Commit from Jolla localization: 49 of 49 strings translated (0 need review).

    jolla-settings-system

  • Updated : 0.11.66.1-10.90.2.jolla — 0.12.5-10.89.1.jolla
  • Unmet requirements: libsystemsettings.so.0
  • [settings-system] Increase backspace reactive area.
  • [jolla-settings-system] Remove deprecated grid mode.
  • [tones] Hide internet calling tone until the feature is supported in the OS.
  • [datetime] Add AllDateTimeSettingsDisplay and respect date/time policy settings.
  • [datetime] Respect date/time policy settings.
  • [devicelock] Don’t clear the pin change error when prompting to re-enter original code.
  • [jolla-settings-system] Pass Ofono SimManager to the Pin input page when changing sim pin.
  • [mdm] Give feedback when a USB mode is disabled by MDM.
  • [settings-system] Fix partition error label showing on top of storage item.

    jolla-settings-system-l10n

  • Updated : 1.243-10.86.1.jolla — 1.251.2-10.90.1.jolla
  • [l10n] Commit from Jolla localization: 461 of 461 strings translated (0 need review).
  • [l10n] Branched jolla-settings-system from version 1.251
  • [l10n] Commit from Jolla localisation: 459 of 461 strings translated (0 need review).
  • [tpl] translation templates update for 0.12.5
  • [l10n] Commit from Jolla localisation: 461 of 461 strings translated (0 need review).
  • [tpl] translation templates update for 0.12.1
  • [tpl] translation templates update for 0.12.2
  • [tpl] translation templates update for 0.12.3
  • [l10n] Commit from Jolla localisation: 463 of 463 strings translated (0 need review).
  • [tpl] translation templates update for 0.11.67
  • [tpl] translation templates update for 0.11.68

    jolla-startupwizard

  • Updated : 0.3.31-10.57.1.jolla — 0.3.35-10.61.1.jolla
  • [jolla-startupwizard] Enable android market place installations again.
  • [startupwizard] Fix year on Swedish EULA.
  • [startupwizard] Update EULA texts.
  • [startup-wizard] Skip Date/Time setup page if MDM policy disallows date/time modifications.
  • [startup-wizard] Use the AllDateTimeSettingsDisplay component.

    jolla-startupwizard-l10n

  • Updated : 1.128-10.61.1.jolla — 1.129-10.62.1.jolla
  • [l10n] Commit from Jolla localisation: 43 of 43 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.32

    jolla-vault-l10n

  • Updated : 1.98-10.47.1.jolla — 1.99-10.48.1.jolla
  • [l10n] Commit from Jolla localization: 85 of 85 strings translated (0 need review).

    kernel-adaptation-sbj

  • Updated : 3.4.108.20170530.1-10.43.1.jolla — 3.4.108.20171017.1-10.44.1.jolla
  • [sbj] Security: upstream fix for CVE-2016-4485.
  • [sbj] Security: upstream fix for CVE-2016-5244.
  • [sbj] Upstream patch for CVE-2017-1000251.

    libdbusaccess

  • Updated : 1.0.4-1.3.2 — 1.0.5-1.4.1
  • [dbusaccess] Fixed gid_t build issue.
  • [dbus-creds] Housekeeping

    libgrilio

  • Updated : 1.0.16-1.7.1 — 1.0.18-1.8.1
  • [libgrilio] Added tests for new packet types.
  • [libgrilio] Fixed incorrect error message
  • [libgrilio] Support for new packet types in RIL v13.
  • [libgrilio] Added Debian packaging
  • [libgrilio] Added grilio_channel_remove_all_handlers macro
  • [libgrilio] MER#1438

    libhybris

  • Updated : 0.0.5.18.5-10.1.1.jolla — 0.0.5.18.8-10.3.1.jolla
  • [odm] Reference also from the /odm path. MER#1824

    libmce-glib

  • Updated : 1.0.4-1.3.2 — 1.0.5-1.4.1
  • [libmce-glib] Added remove_all_handlers macros.
  • [libmce-glib] Version 1.0.5

    libngf-qt5

  • Updated : 0.5.0-1.8.1 — 0.6.0-1.9.1
  • [libngf-qt] Remove unnecessary references on private class.

    libqofonoext

  • Updated : 1.0.19-1.14.1 — 1.0.20-1.15.1
  • [libqofonoext] Support for arfcn, bsic, uarfcn and earfcn properties.

    libsocialcache

  • Updated : 0.0.55-1.23.5 — 0.0.56-1.24.1
  • [libsocialcache] Remove rm touching /home/nemo/.local.

    libusb-moded-qt5

  • Updated : 1.4-1.2.8 — 1.6-1.3.1
  • [spec] Cleanup duplicate requires field
  • [usb-moded-qt5] Properly link package and .pc version.
  • [usb] Add api for the available modes property.

    lipstick-jolla-home-demos

  • Updated : 0.4.8-10.12.1.jolla — 0.5.2-10.13.4.jolla
  • [notification] Show notifications only if supported.
  • [mail] Update mail content.
  • [notifications] Sailor name update.

    lipstick-jolla-home-qt5

  • Updated : 0.36.8-10.126.1.jolla — 0.36.21-10.129.1.jolla
  • Unmet requirements: libsystemsettings.so.0
  • [lipstick-jolla] Fix low disk notification not being tappable.
  • [lipstick-jolla-home] Use system dbus device lock state signal to sync unlocking.
  • [rpm] Bump up package version and dependencies.
  • [lipstick-jolla-home] Expect interaction also when pin query visible.
  • [lockscreen] Polish clock layouts on higher resolution displays.
  • [devicelock] Ensure the pin warnings are reset before a new authentiction.
  • [lipstick-jolla] Adapt to notification replacesId -> id naming change.
  • [lipstick-jolla-home] Tune homescreen page margins.
  • [mce] Instruct mce not to remove tklock when device lock is active.
  • [lisptick-jolla-home] Remove switcher item only upon uninstallation.
  • [usb] Show available USB modes in the selector instead of supported.
  • [homescreen] Close applications when they are uninstalled.
  • [lipstick-jolla] Add screenshot dbus service with policy protection.
  • [lipstick-jolla] Protect screenshot api better.
  • [lipstick-jolla] Use horizontal padding on „no notifications“ text.

    lipstick-jolla-home-qt5-l10n

  • Updated : 1.204-10.74.1.jolla — 1.212.1-10.78.1.jolla
  • [l10n] Branched lipstick-jolla-home-qt5 from version 1.212
  • [l10n] Commit from Jolla localisation: 167 of 167 strings translated (0 need review).
  • [l10n] Commit from Jolla localisation: 167 of 167 strings translated (0 need review).
  • [l10n] Commit from Jolla localisation: 126 of 167 strings translated (0 need review).
  • [tpl] translation templates update for 0.36.20
  • [l10n] Commit from Jolla localisation: 167 of 167 strings translated (0 need review).
  • [tpl] translation templates update for 0.36.13
  • [tpl] translation templates update for 0.36.15
  • [tpl] translation templates update for 0.36.18
  • [l10n] Commit from Jolla localisation: 126 of 167 strings translated (0 need review).
  • [tpl] translation templates update for 0.36.10

    lipstick-qt5

  • Updated : 0.32.2-1.84.1 — 0.32.9-1.85.3
  • Binaries removed : lipstick-qt5-screenshot
  • Unmet requirements: libsystemsettings.so.0
  • [lipstick] Add general warning category.
  • [rpm] Increment package version
  • [lipstick] Require libusb-moded-qt5 1.6 or greater.
  • [lipstick] Adapt to changed libngf-qt method signatures.
  • [lipstick] Remove support for x-nemo-feedback-suppressed hint.
  • [lipstick] Remove user-closable notification hint.
  • [lipstick] Rename notification:replacesId to id which it really is.
  • [usb] Add api for the available modes property.
  • [lipstick] Delete removed launcher items.
  • [lipstick] Remove screenshot D-Bus interface.

    lipstick-qt5-l10n

  • Updated : 1.58-10.35.1.jolla — 1.60-10.37.1.jolla
  • [l10n] Commit from Jolla localization: 26 of 26 strings translated (0 need review).
  • [tpl] translation templates update for 0.32.3
  • [tpl] translation templates update for 0.32.4

    mce

  • Updated : 1.89.0-1.7.1 — 1.90.0.1-1.12.1
  • [dbus] Add config for button backlight methods.
  • [buttonbacklight] Implement button backlight policy.
  • [datapipe] Make submode_repr() functions generally available
  • [powerkey] Do not differentiate long/short presses in display off.
  • [powerkey] Ignore bursts of power key presses.
  • [settings] Do not grab touch input devices by default.
  • [display] Use normal blanking delay from interactive lockscreen. MER#1802

    mce-headers

  • Updated : 1.22.0-1.4.1 — 1.23.0-1.6.1
  • [mce] Add button backlight policy related D-Bus constants.

    mce-plugin-libhybris

  • Updated : 1.10.0-10.12.1.jolla — 1.11.0-10.13.1.jolla
  • [config] Add enablers for accessing mce configuration data
  • [quirks] Add enablers for tweaking backend behavior via config files
  • [sysfs-led] Add diagnostic logging
  • [sysfs-led] Add sw breathing enable/disable quirk
  • [sysfs-led] Allow backend selection via configuration file
  • [sysfs-led] Implement F5121 (Sony Xperia X) backend.
  • [sysfs-val] Write through cache for numeric sysfs values

    meego-rpm-config

  • Updated : 0.18-1.2.1 — 0.18-1.3.1
  • Fix so fpmath=sse actually works
  • Switch back to vfpv3-d16 for armv7hl
  • Fixes MER#1469: Revert \“Switch back to vfpv3-d16 for armv7hl\“
  • Move to tar_git from dumb packaging
  • Add aarch64 to rpmrc
  • [aarch64] Add flags and config for aarch64 builds.
  • [macros] Tell brp-python-bytecompile the default Python binary.

    mobile-broadband-provider-info

  • Updated : 20131125+git62-1.33.1 — 20131125+git65-1.35.1
  • [mbpi] Updated settings for Bolivia.
  • [mbpi] Noverca acquired by TIM S.p.A and now is a Full MVNO called Kena Mobile MER#902
  • [mbpi] Added apn protocol tag.
  • [mbpi] Added settings for Bolivia.
  • [mbpi] Updated O2 UK MMS settings.

    nemo-qml-plugin-calendar-qt5

  • Updated : 0.2.21-1.10.1 — 0.2.22-1.11.1
  • [nemo-qml-plugin-calendar] Use QCommandLineParser and add the choice of notebook on exporation. Fixes MER#1800

    nemo-qml-plugin-dbus-qt5

  • Updated : 2.1.11-1.17.1 — 2.1.12-1.18.1
  • [nemo-qml-plugin-dbus] Add dbus service status to the dbus interface.

    nemo-qml-plugin-devicelock

  • Updated : 0.2.9-1.7.1 — 0.2.11-1.8.1
  • [rpm] Fix build.
  • [nemo-qml-plugin-devicelock] Change default device lock timeout to immediate.
  • [spec] Use _smp_mflags instead of jobs macro.

    nemo-qml-plugin-email-qt5

  • Updated : 0.2.2-10.3.1.jolla — 0.2.3-10.4.1.jolla
  • [nemo-qml-plugin-email] Add a fake HTML to display single inline image attachments, fixes to MER#1579
  • [nemo-qml-plugin-email] Add requested Chinese email services.

    nemo-qml-plugin-email-qt5-offline

  • Updated : 0.1.75-10.5.1.jolla — 0.2.3-10.9.1.jolla
  • [nemo-qml-plugin-email] Add a fake HTML to display single inline image attachments, fixes to MER#1579
  • [nemo-qml-plugin-email] Add requested Chinese email services.
  • [nemo-qml-plugin-email] Add a test case for folder ordering in FolderListModel, contributes to MER#1778
  • [nemo-qml-plugin-email] Allow more than one level of folder nesting, fix MER#1778
  • [nemo-qml-plugin-email] Fix email account creation.
  • [nemo-qml-plugin-email] Fix -offline package building.
  • [nemo-qml-plugin-email] Move to Nemo.Email import.
  • [qml-plugin-email] Remove bogus warnings when setting empty to/cc/bcc.
  • [nemo-qml-plugin-email] Add missing #include.
  • [nemo-qml-plugin-email] Report changes to the timeSection role. Contributes to MER#1610
  • [nemo-qml-plugin-email] Handle attachments status in subparts, contributes to MER#1574.
  • [nemo-qml-plugin-email] Handle NULL references.

    nemo-qml-plugin-notifications-qt5

  • Updated : 1.1.1-1.18.1 — 1.1.2-1.19.1
  • [nemo-qml-plugin-notifications] Add property for transient hint.

    nemo-qml-plugin-systemsettings

  • Updated : 0.2.29.1-1.38.1 — 0.2.32-1.37.1
  • Unmet requirements: libsystemsettings.so.0
  • [nemo-qml-plugin-systemsettings] Properly link package and .pc version.
  • [spec] Use _smp_mflags instead of jobs macro.
  • [nemo-qml-plugin-systemsettings] Add DateTimeSettings::ready property.
  • [nemo-qml-plugin-systemsettings] Fix crash in OpenVPN file import.

    nemo-transferengine-qt5-l10n

  • Updated : 1.22-10.18.1.jolla — 1.23-10.19.1.jolla
  • [l10n] Commit from Jolla localisation: 7 of 7 strings translated (0 need review).

    ngfd-plugin-droid-vibrator

  • Updated : 0.91.3-10.7.1.jolla — 0.91.4-10.7.2.jolla
  • [droid-vibrator] Change default notice event.

    non-oss-package-groups

  • Updated : 0.9.7-10.68.1.jolla — 0.10.2-10.70.1.jolla
  • [patterns] Require all Harbour-allowed QML modules.
  • [patterns] Update after sdk-configs extraction.
  • [patterns] Add support for SDK with separate build tools distribution.
  • [patterns] Do not require -development-tools inside sb2 target.
  • [patterns] Do not require git, strace and vim in tooling.

    non-oss-project-config

  • Updated : 0.6.15-10.18.1.jolla — 0.6.16-10.19.1.jolla
  • [non-oss] Break cycle for profiled and j-c-c.

    ofono

  • Updated : 1.19+git23-1.52.1 — 1.19+git34.1-1.56.1
  • [ril] Added ril_parse_int utility
  • [ril] Don’t mix slice and default allocators in ril_plugin.c
  • [ril] First fix permissions on top-level directories.
  • [ril] Fix storage directory permissions at startup.
  • [test] Added test-ril_util
  • [ril] Use default start timeout for default configuration.
  • [ofono] More unit tests for the ready flag
  • [ofono] Set the ready flag if no drivers is registered with sailfish_manager. Fixes MER#1808
  • [ril] Support for optional modems. Fixes MER#1783
  • [ofono] Added unit test for sailfish_cell_info
  • [ofono] Move cell info API to the driver independent area.
  • [ril] Support for logging new packet types (RIL v13).
  • [ril] Fixed online state tracking.
  • [ofono] Handle normal call end with error cause.
  • [ofono] Avoid pointless radio caps switches.
  • [ofono] Support for RIL_CellInfo_v12.
  • [ril] Use REQUEST_SEND_SMS_EXPECT_MORE when appropriate
  • [ofono] Added tests for fetching APN protocol from MBPI.
  • [ofono] mbpi: Add support for APN protocol in MBPI. Fixes #JB39520
  • [ofono] sailfish_manager: require manager_create callback
  • [ofono] Add test-sailfish_manager and test-sailfish_sim_info to the ignore list
  • [ofono] Renamed __ofono_dbg -> ofono_dbg to allow binary plugins to use DBG macro
  • [ril] Deserialize RIL I/O when SIM status becomes known.
  • [ril] Fixed a bug in ril_plugin_find_unused_slot.
  • [ofono] Moved RIL-independent stuff out of Sailfish OS RIL driver.
  • [ofono] network: Added ofono_netreg_get_name() function
  • [pushforwarder] Housekeeping
  • [ril] Added option to disable voicecall handling. Contributes to MER#1798
  • [ril] Changed the name of the common section in the error statistics file
  • [ril] Housekeeping

    ohm-plugins-misc

  • Updated : 1.3.6-1.19.1 — 1.4.1-1.20.1
  • Binaries added : ohm-plugin-mdm – 1.4.1-1.20.1, ohm-plugin-mdm-devel – 1.4.1-1.20.1
  • [accessories] Support uevent for wired accessories.
  • [build] Build MDM plugin.
  • [mdm] New plugin for controlling mdm features.
  • [packaging] Package new MDM plugin.

    package-groups

  • Updated : 0.9.11-10.8.27.jolla — 0.9.18-10.11.1.jolla
  • Binaries added : patterns-sailfish-demo-android-apps – 0.9.18-10.11.1.jolla, patterns-sailfish-demo-retail – 0.9.18-10.11.1.jolla, patterns-sailfish-demo – 0.9.18-10.11.1.jolla, patterns-sailfish-demo-base – 0.9.18-10.11.1.jolla
  • [pattern] Add another android demo content pattern.
  • [packaging] Convet to meta packages from patterns.
  • [patterns] Drop dontcrash config for crash reporter.
  • [patterns] Drop VPN demo package.
  • [patterns] Add VPN demo content.
  • [patterns] Workaround for
  • [patterns] Use 2 minute dimming delay on all demo devices.
  • [patterns] Do not include store apps by default to demo images.

    patterns-sailfish

  • Updated : 0.9.7-10.3.1.jolla — 0.10.2-10.5.1.jolla
  • Binaries added : patterns-sailfish-configuration-sdk-tooling – 0.10.2-10.5.1.jolla, patterns-sailfish-sb2-host – 0.10.2-10.5.1.jolla
  • Binaries removed : patterns-sailfish-sb2-common
  • Unmet requirements: sdk-configs
  • [patterns] Require all Harbour-allowed QML modules.
  • [patterns] Update after sdk-configs extraction.
  • [patterns] Add support for SDK with separate build tools distribution.
  • [patterns] Do not require -development-tools inside sb2 target.
  • [patterns] Do not require git, strace and vim in tooling.

    policy-settings-common

  • Updated : 0.7.1-1.20.1 — 0.7.3-1.22.2
  • [policy] Add missing device from mute list.
  • [policy] Add mechanism to prevent recording.

    pptp

  • Updated : 1.8.0+git3-1.1.2 — 1.8.0+git4-1.2.1
  • Binaries added : pptp-setup – 1.8.0+git4-1.2.1
  • [pptp] Separate setup script into its own subpackage.
  • [pptp] Separate setup script into its own subpackage.

    pulseaudio-modules-droid

  • Updated : 8.0.60-10.19.1.jolla — 8.0.62-10.5.1.jolla
  • [build] Check for voice uplink and downlink enums.
  • [common] Use correct input mapping with voicecall record.
  • [sink] Set volume control callbacks properly with hw volume.
  • [sink] Use hooks for voice volume control.

    pulseaudio-modules-droid-sbj

  • Updated : 8.0.60-10.38.1.jolla — 8.0.61-10.38.1.jolla
  • [sink] Set volume control callbacks properly with hw volume.
  • [sink] Use hooks for voice volume control.

    qmf-qt5

  • Updated : 4.0.4+git61-1.24.1 — 4.0.4+git62-1.25.2
  • [libqmfclient1] Move contentDisposition and contentDescription into QMailMessagePartContainer, contributes to MER#1579.
  • [messagingframework] Introduce a new function to test content type content, fixes MER#1786
  • [messagingframework] Move contentDisposition into QMailMessagePartContainer, contributes to MER#1579
  • [qmfclient] don’t return calendar invitation as attachment MER#1587.
  • [qmf] Don’t abord part loading when encountering an empty file.
  • [qmf] Insert status as QINT64 in mailmessages database, not int.
  • [qmf] Insert status as QUINT64 in mailmessages database, not int. Contributes to MER#1780

    qml-rpm-macros

  • Updated : 0.0.3-1.2.1 — 0.0.5-1.3.1
  • [macros] Quiet down „requires“ generation.
  • [macros] Fix grep usage in C/POSIX locale.

    qt5

  • Updated : 5.6.2+git16-1.35.1 — 5.6.2+git19-1.37.2
  • [mer][qtnetwork] Create new QNetworkSession from the new online QNetworkConfiguration.
  • [mer][qtnetwork] Treat missing connmanManager as completed update.
  • [qtbase] Fix comment leaking into %postun.
  • [mer] Always unref udev_device produced by udev_monitor_receive_device.

    qt5-qtgraphicaleffects

  • Updated : 5.6.2+git1-1.4.2 — 5.6.2+git2-1.5.1
  • [mer] Add missing module declaration to qmldir.

    qt5-qttools

  • Updated : 5.6.2+git5-1.10.1 — 5.6.2+git6-1.11.1
  • [qttools] Increase kmap2qmap KEY_MAX to 0x2ff. Contributes to MER#1817

    qt5-qtwayland-wayland_egl

  • Updated : 5.4.0+git45-1.47.1 — 5.4.0+git46-1.48.2
  • [qtwayland] (Hacky) mapping of camera focus keys to qt keys. Contributes to MER#1817
  • # qt5-qtwebkit
  • Updated : 5.6.2+git3-1.18.2 — 5.6.2+git4-1.20.1
  • [mer][qtwebkit] Close WebProcess when the last WebPage gets closed.

    qt5-qtxmlpatterns

  • Updated : 5.6.2+git1-1.4.4 — 5.6.3+git2-1.5.1
  • [qtxmlpatterns] Upgrade to 5.6.3.

    qtmozembed-qt5

  • Updated : 1.13.28-10.4.2.jolla — 1.13.29-10.5.2.jolla
  • [qtmozembed] Do not use touch velocity in flick test.
  • [qtmozembed] Read initial compositor state from QMozWindow
  • [qtmozembed] Set DPI for QQuickMozView
  • [qtmozembed] Update chrome state on scroll area update

    rpm

  • Updated : 4.9.1.2-1.5.1 — 4.9.1.2-1.6.1
  • [macros] Add __python3 macro.

    rpmlint

  • Updated : 1.4-1.1.9 — 1.9+git3-1.2.1
  • [rpmlint] Remove CheckSUIDPermissions that hasn’t ever been used.
  • [packaging] Convert to tar_git format at 1.4.
  • [rpmlint] Update to 1.9.
  • [update] Update to rpmlint 1.9. Remove man gzips.
  • Fixes https://bugzilla.redhat.com/show_bug.cgi?id=783912 : added rpmlint-1.4-encoding.patch patch.

    rpmlint-mini

  • Updated : 1.1-1.1.22 — 1.1+git1-1.2.1
  • Add imports for unicodedata and json.
  • Make rpmlintrc from packages work again.

    sailfish-browser

  • Updated : 1.15.16-10.4.1.jolla — 1.16.1-10.9.1.jolla
  • [sailfish-browser] Write rendering preferences to prefs.js.
  • [sailfish-browser] Add basic fullscreen API tests.
  • [sailfish-browser] Add embed video tests.
  • [sailfish-browser] Always reset margins when changing fullscreen mode.
  • [sailfish-browser] Shorten UA update interval.
  • [sailfish-browser] Sync posting clear window task and GL context creation.
  • [user-agent] Fix slashdot user-agent.
  • [sailfish-browser] Do not start margin change throttle without content.
  • [sailfish-browser] Drop touch start tolerance.
  • [user-agent] Add override for forbes.com.
  • [user-agent] Add override for live.com
  • [user-agent] Add user agent overrides.
  • [user-agent] Fix Elisa webmail access.
  • [user-agent] Fix yahoo.com to more user friendly UA.
  • [user-agent] Update preprocessed user agent overrides

    sailfish-components-accounts-qt5

  • Updated : 0.2.8.1-10.55.1.jolla — 0.2.10-10.54.2.jolla
  • [sailfish-components-accounts] Support read-only accounts.
  • [sailfish-components-accounts] Migrate to Dropbox V2 API.

    sailfish-components-accounts-qt5-l10n

  • Updated : 1.42-10.31.1.jolla — 1.45.1-10.35.1.jolla
  • [l10n] Branched sailfish-components-accounts-qt5 from version 1.45
  • [l10n] Commit from Jolla localisation: 10 of 10 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.10
  • Updated : 1.70-10.38.1.jolla — 1.71-10.39.1.jolla
  • [l10n] Commit from Jolla localization: 52 of 52 strings translated (0 need review).

    sailfish-components-timezone-qt5-l10n

  • Updated : 1.54-10.31.1.jolla — 1.57.1-10.34.1.jolla
  • [l10n] Branched sailfish-components-timezone-qt5 from version 1.57
  • [l10n] Commit from Jolla localisation: 686 of 691 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.30
  • [l10n] Commit from Jolla localization: 691 of 691 strings translated (0 need review).

    sailfish-components-webview-qt5

  • Updated : 0.0.17-10.7.1.jolla — 0.0.19-10.8.1.jolla
  • [sailfish-components-webview] Calculate touch start tolerance from startDragDistance.
  • [sailfish-components-webview] Disable apz.asyncscroll.throttle and timeout for now.
  • [sailfish-components-webview] Use tile size of screen width up to FullHD and increase pixel ratio.

    sailfish-components-webview-qt5-l10n

  • Updated : 1.9-10.7.1.jolla — 1.10-10.8.1.jolla
  • [l10n] Commit from Jolla localization: 0 of 37 strings translated (0 need review).

    sailfish-content-ambiences-default

  • Updated : 0.4.13-10.7.1.jolla — 0.4.15-10.10.1.jolla
  • Binaries added : sailfish-content-ambiences-default-flow – 0.4.15-10.10.1.jolla
  • Unmet requirements: sailfish-content-ambiences-default-flow
  • [ambiences] Introduce new Flow ambience.
  • [ambiences] Suppress build time warning about naming.

    sailfish-content-ambiences-default-favorites

  • Updated : 0.4.13-10.3.1.jolla — 0.4.15-10.6.1.jolla
  • [ambiences] Introduce new Flow ambience.
  • [ambiences] Suppress build time warning about naming.
  • Updated : 0.29.0-10.3.1.jolla — 0.31.1-10.5.1.jolla
  • [downloader] Silence the connectivity test.
  • [conf] Make it possible to have multiple config file.
  • [apk] Add apk preload script.
  • [content] Use xdg-user-dir always.
  • [download] Make script work with partial content.

    sailfish-content-graphics-closed

  • Updated : 0.6.0-10.7.1.jolla — 0.6.1-10.8.2.jolla
  • [ambient-icons-closed] Fix Sailfish OS launcher icon.

    sailfish-maps

  • Updated : 1.1.27-10.41.1.jolla — 1.1.28-10.43.1.jolla
  • [sailfish-maps] Avoid unnecessary notification category file.

    sailfish-maps-l10n

  • Updated : 1.69-10.35.1.jolla — 1.73.1-10.39.1.jolla
  • [l10n] Branched sailfish-maps from version 1.73
  • [l10n] Commit from Jolla localisation: 89 of 89 strings translated (0 need review).
  • [tpl] translation templates update for 1.1.28

    sailfish-mdm

  • Updated : 0.2.49-10.4.1.jolla — 0.2.61-10.6.1.jolla
  • Unmet requirements: libsystemsettings.so.0, ohm-plugin-mdm
  • [sailfish-mdm] Add API to enable/disable flight mode.
  • [sailfish-mdm] Add accounts provisioning API.
  • [sailfish-mdm] Add email account provisioning API.
  • [sailfish-mdm] Add policy for microphone.
  • [mdm] Add API for managing system SSL certificates.
  • [mdm] Add API for managing system SSL certificates.
  • [sailfish-mdm] Add API to set date/time/timezone and control auto-update for these settings.
  • [sailfish-mdm] Add policy for controlling date/time settings.
  • [sailfish-mdm] Add timed-qt5 dependency.
  • [sailfish-mdm] Restart camera daemon upon camera policy change.
  • [sailfish-mdm] Add API for disabling USB modes.
  • [sailfish-mdm] Add hotSwappingSupported method to the SimInfo API.
  • [sailfish-mdm] Add some more notes for MDM app development.
  • [sailfish-mdm] Provide API to set, activate, deactivate mobile data APN.
  • [sailfish-policy] Add policy setting for Mobile Network settings.
  • [sailfish-mdm] Add property for disallowing screenshots.
  • [sailfish-mdm] Improve unit test coverage.

    sailfish-rfkill-plugin

  • Updated : 0.0.2-10.2.5.jolla — 0.0.3-10.3.1.jolla
  • [sailfish-rfkill-plugin] Use connman logging facilities.

    sailfish-svg2png

  • Updated : 0.2.0-10.7.2.jolla — 0.2.1-10.8.1.jolla
  • [icons] Tune launcher icon size for Full HD smartphones.

    sailfish-tutorial

  • Updated : 0.1.35-10.26.1.jolla — 0.1.37-10.27.1.jolla
  • [tutorial] Fix phone pulley lesson having overlapping icons and text.
  • [sailfish-tutorial] Reduce initial lesson delay.

    sailfish-tutorial-l10n

  • Updated : 1.43-10.26.1.jolla — 1.44-10.27.1.jolla
  • [l10n] Commit from Jolla localisation: 97 of 98 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.36
  • [tpl] translation templates update for 0.1.37

    sailfish-version

  • Updated : 2.1.2-10.44.3.jolla — 2.1.3-10.45.7.jolla
  • [version] Change name for 2.1.3 (Kymijoki).

    sailfishsilica-qt5

  • Updated : 0.24.22-10.93.1.jolla — 0.24.29-10.95.1.jolla
  • [silica] Add sane default highlight move duration to SilicaLisView.
  • [sailfishsilica] Don’t fade out disabled combo box description label twice.
  • [sailfishsilica] Use attached DragFilter for KeypadButton.
  • [silica] Introduce widthRatio property to Screen object.
  • [silica] Tune homescreen page margins.
  • [sailfish-silica] doc: Remove 256×256 from recommended icon sizes.
  • [sailfishsilica] Allow overriding horizontal page margin on devices with medium display size category.
  • [silica] Avoid odd geometry values in theme.
  • [silica] doc: Make „QML Types“ expandable in TOC.

    sailfishsilica-qt5-l10n

  • Updated : 1.84-10.49.1.jolla — 1.85-10.50.1.jolla
  • [l10n] Commit from Jolla localization: 81 of 82 strings translated (0 need review).

    sd-utils

  • Updated : 0.1.2-1.15.1 — 0.1.3-1.16.1
  • [sd-utils] In case filesystem type is missing, try reading it.
  • [sd-utils] Take the last device name.
  • [sd-utils] Try to read name of the partition to the UUID.

    sdk-configs

  • Updated : 0.99-10.36.1.jolla — 0.106-10.3.1.jolla
  • Binaries added : ssu-kickstarts-sdk – 0.106-10.3.1.jolla, sdk-configs – 0.106-10.3.1.jolla, sdk-tooling-configs – 0.106-10.3.1.jolla
  • [ssu] Switch back to mer-tools in release and rnd repos
  • [ssu] Switch back to mer-tools in release and rnd repos.
  • [ks] Rename images including proper version ID.
  • [sdk-configs] Use a UTF-8 locale.
  • [packaging] Require coreutils for %post scriptlet.
  • [ssu] Remove nonexisting repos from tooling.
  • [ssu] Remove „SDK“ board configuration.
  • [ssu] Replace mer-tools with tools.
  • [sdk-configs] Add systemCheck for zypper.
  • [sdk-configs] Initial commit.

    sdk-harbour-rpmvalidator

  • Updated : 1.47.1-10.24.1.jolla — 1.48.4-10.26.1.jolla
  • Binaries added : sdk-harbour-rpmvalidator-sdk-tests – 1.48.4-10.26.1.jolla
  • [tests] Verify that QML modules are preinstalled in SDK Targets.
  • [tests] Add tests for QML autocompletion support.
  • [script] Change warning about executables to error.
  • [config] Remove 256×256 from recommended icon sizes.
  • [conf] Allow python3-gobject in harbour.

    sdk-setup

  • Updated : 1.0.20.2-10.16.1.jolla — 1.1.6-10.14.1.jolla
  • Binaries added : sdk-tooling-chroot – 1.1.6-10.14.1.jolla
  • [sdk-setup] Fix entering SDK.
  • [sdk-manage] Fix usage outside of home directory.
  • [mer-sdk-chroot] Do not hang first time after reboot.
  • [git-change-log] Add –append-cmd option.
  • [git-change-log] Add –append-from option.
  • [git-change-log] Add –only-add-tagged option
  • [mb2] Allow to interrupt during dependencies installation
  • [mb2] Fix command line arguments forwarding.
  • [mb2] Improve –fix-version.
  • [mb2] Sanitize changelog contents before appending to .spec file.
  • [mer-sdk-chroot] Allow to identify the SDK.
  • [mer-sdk-chroot] Fix argument passing.
  • [mer-sdk-chroot] Fix user shell during chroot setup.
  • [mer-sdk-lxc] Fix user shell during container setup.
  • [sdk-manage] Fix user shell during target installation.
  • [sdk-setup] Increase nproc limit inside SDK chroot
  • [sdk-manage] Fix automatic installation of toolchains.
  • [sdk-manage] Quiet sb2-config down.
  • [sdk-foreach] Add -m option to select sb2 mapping mode
  • [sdk-manage] Add missing sudo usage
  • [sdk-manage] Do not rely on strict argument ordering
  • [sdk-manage] Do not require ‚–‚ prefix for options denoting sub-commands
  • [sdk-manage] List targets in column
  • [sdk-manage] Use /var/tmp as temporary dir for downloads
  • [sdk-setup] Add support for separate build tools distribution.

    sdk-webapp

  • Updated : 0.6.27-10.5.1.jolla — 0.7.0-10.6.1.jolla
  • [sdk-webapp] Add support for separate build tools distribution.

    sensorfw-qt5

  • Updated : 0.9.2.1-1.33.1 — 0.9.4-1.32.1
  • [hybris-adaptors] Select 1st sensor variant for each sensor type.
  • [hybris-adaptors] Use wakelock to ensure proximity data io.
  • [sensorfw] Add hybrispressureadaptor. Contributes to MER#1649.
  • [sensorfw] Various small fixes to comments, defines and adaptor queries. Contributes to MER#1649.

    sociald

  • Updated : 0.1.62.1-10.29.1.jolla — 0.1.63-10.28.1.jolla
  • [buteo-sync-plugins-social] Update Dropbox Images plugin to V2 API.

    ssu

  • Updated : 0.43.0-1.36.1 — 0.43.4-1.37.1
  • [ssuks] Add also device variant for identification.
  • [ssuks] Add DeviceModel for identification.
  • [ssu] Extract libsandboxhook.so from tests package.
  • [urlresolver] Implement graceful shutdown. Fixes MER#1797

    ssu-repos

  • Updated : 0.99-10.36.1.jolla — 0.101-10.36.1.jolla
  • Binaries removed : ssu-kickstarts-basic
  • [ssu-repos] Extract sdk-configs.
  • [sdk] Add support for separate build tools distribution.

    store-client

  • Updated : 0.11.28-10.96.1.jolla — 0.11.31-10.98.1.jolla
  • Unmet requirements: libsystemsettings.so.0
  • [store-client] Send device information at startup.
  • [store-client] Release cover image for 2.1.3.
  • [store-client] Avoid creating context menu before it is shown.

    store-client-l10n

  • Updated : 1.116-10.55.1.jolla — 1.117-10.56.1.jolla
  • [l10n] Commit from Jolla localization: 150 of 154 strings translated (0 need review).
  • [tpl] translation templates update for 0.11.29

    taglib

  • Updated : 1.7.2+git2-1.2.2 — 1.11.1-1.3.1
  • [taglib] Update to 1.11.1.

    timed-qt5

  • Updated : 3.4-1.21.2 — 3.4.1-1.22.1
  • [timed] Don’t fail on uninstallation if there’s no user session.

    transferengine-plugins

  • Updated : 0.1.8.1-10.48.1.jolla — 0.1.9-10.47.1.jolla
  • [transfer-engine-plugins] Migrate Dropbox to V2 API.

    transferengine-plugins-l10n

  • Updated : 1.78-10.46.1.jolla — 1.79-10.47.1.jolla
  • [l10n] Commit from Jolla localisation: 61 of 61 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.9

    ui-democontent

  • Updated : 0.7.5-10.16.1.jolla — 0.9.10-10.20.1.jolla
  • Binaries added : ui-democontent-language_es_ES – 0.9.10-10.20.1.jolla, ui-democontent-preload-latam – 0.9.10-10.20.1.jolla, ui-democontent-suw-disabled – 0.9.10-10.20.1.jolla, ui-democontent-weather-barcelona – 0.9.10-10.20.1.jolla, ui-democontent-vpn – 0.9.10-10.20.1.jolla, ui-democontent-mce-delayed-blanking – 0.9.10-10.20.1.jolla, ui-democontent-language_en_GB – 0.9.10-10.20.1.jolla, ui-democontent-weather-cochabamba – 0.9.10-10.20.1.jolla
  • Unmet requirements: ui-democontent-mce-delayed-blanking
  • [preload] Add preload content package for latam.
  • [weather] Update cochabamba weather info.
  • [accounts] Make sure .config is owned by user.
  • [accounts] Use -p with mkdir.
  • [lang/suw] Execute onshots already in imager.
  • [lang] Make it possible to change language.
  • [suw] Add packge that can disble suw.
  • [weather] Fix weather preloading.
  • [language] Add Spannish language.
  • [weather] Add cochabamba location.
  • [democontent] Fix contact import not working due to security restrictions.
  • [contacts] More sailors to the list.
  • [vpn] Demo content for VPN.
  • [democontent-mce] Add delayed blanking time configuration.
  • [democontent-mce] Do not use legacy max-brightness levels
  • [mails] New mail content.
  • [contacts] Fix typos and simplify the content.
  • [packaging] Add python BuildRequires.
  • [contacts] Update contacts.
  • [weather] Make Barcelona current weather location.

    usb-moded

  • Updated : 0.86.0+mer15.1-1.33.1 — 0.86.0+mer18-1.32.1
  • [usb] Add a whitelist property specifying allowed USB modes.
  • [debug] Do diagnostic logging for each D-Bus signal broadcast
  • [debug] Optionally include file/line/function info when logging to stderr
  • [modesetting] Write dummy value to clear ffs function list.

    valgrind

  • Updated : 3.11.0-10.4.2.jolla — 3.11.0-10.5.1.jolla
  • Binaries added : valgrind-extratools – 3.11.0-10.5.1.jolla
  • [valgrind] Split extra valgrind tools to separate package.

    vm-configs

  • Updated : 0.8-10.27.1.jolla — 0.12-10.29.4.jolla
  • Unmet requirements: sdk-configs, patterns-sailfish-sb2-host
  • [ssu] Switch back to mer-tools in release and rnd repos
  • [config] Move locale settings into sdk-configs package.
  • [ssu] Move ‚Platform SDK Chroot‘ definition here.
  • [ssu] Replace mer-tools with tools.
  • [patterns] Update after sdk-configs extraction.
  • [packaging] Update after sdk-configs extraction.
  • [configs] Drop mer-cross repo from configs.
  • [ks] Increase root partition size to allow installing more targets.
  • [patterns] Add support for separate tools distribution.

    voicecall-ui-jolla

  • Updated : 0.10.11-10.78.2.jolla — 0.10.14-10.79.1.jolla
  • [callrecording] Avoid creating context menu before it is shown.
  • [rpm] Increment package version and update requirements.
  • [voicecall-ui] Add microphone policy handling.
  • [voicecall-jolla] Remove categories from ‚trivial‘ notification.
  • [voicecall] Add translation enablers for conference call actions.

    voicecall-ui-jolla-l10n

  • Updated : 1.151-10.68.1.jolla — 1.158.1-10.72.1.jolla
  • [l10n] Branched voicecall-ui-jolla from version 1.158
  • [l10n] Commit from Jolla localization: 203 of 203 strings translated (0 need review).
  • [tpl] translation templates update for 0.10.14
  • [l10n] Commit from Jolla localisation: 200 of 201 strings translated (0 need review).
  • [tpl] translation templates update for 0.10.13
  • [l10n] Commit from Jolla localisation: 201 of 201 strings translated (0 need review).
  • [tpl] translation templates update for 0.10.12

    wpa_supplicant

  • Updated : 2.6+git2-1.16.2 — 2.6+git3-1.18.1
  • [wpa_supplicant] Cleaned up .gitmodules
  • [wpa_supplicant] CVE-2017-13077
  • [wpa_supplicant] CVE-2017-13078
  • [wpa_supplicant] CVE-2017-13079
  • [wpa_supplicant] CVE-2017-13080
  • [wpa_supplicant] CVE-2017-13081
  • [wpa_supplicant] CVE-2017-13082
  • [wpa_supplicant] CVE-2017-13084
  • [wpa_supplicant] CVE-2017-13086
  • [wpa_supplicant] CVE-2017-13087
  • [wpa_supplicant] CVE-2017-13088
  • [wpa_supplicant] Security update.

    xkeyboard-config

  • Updated : 2.10.1+git4-1.4.1 — 2.10.1+git5-1.6.1
  • [xkeyboard-config] Map camera focus and snapshot keys. Contributes to MER#1817

    xulrunner-qt5

  • Updated : 38.8.0.17-10.4.1.jolla — 38.8.0.21-10.6.2.jolla
  • [nemo][xulrunner] Build xulrunner with ARM instruction set instead of THUMB.
  • [xulrunner] Build xulrunner with ARM instruction set instead of THUMB.
  • [nemo][xulrunner] Add webrtc 64 bit support to build config.
  • [xulrunner] Add webrtc 64 bit support to build config.
  • [nemo][embedlite] Drop touch start tolerance default value.
  • [nemo][embedlite] Use default value for „apz.asyncscroll.throttle“.
  • [rpm] Bump up version.

Packages added

bluetooth-rfkill-event-hciattach

  • Binaries added : bluetooth-rfkill-event-hciattach-configs-mer – 1.0.6-10.1.1.jolla, bluetooth-rfkill-event-hciattach – 1.0.6-10.1.1.jolla
  • Unmet requirements: bluetooth-rfkill-event-hciattach = 1.0.6-10.1.1.jolla
  • [bluetooth-rfkill-event] Enable new switches for hciattach.
  • [bluetooth-rfkill-event] Support hciattach for patch downloading.
  • [packaging] Add hciattch variant packaging.
  • [service] Accept hciattach variant env file as well.

    droid-config-hy004

  • Binaries added : droid-config-hy004-bluez5 – 0.1.3-10.4.2.jolla, droid-config-hy004-flashing – 0.1.3-10.4.2.jolla, droid-config-hy004-ssu-kickstarts – 0.1.3-10.4.2.jolla, droid-config-hy004-kickstart-configuration – 0.1.3-10.4.2.jolla, droid-config-hy004-sailfish – 0.1.3-10.4.2.jolla, droid-config-hy004-patterns – 0.1.3-10.4.2.jolla, droid-config-hy004-out-of-image-files – 0.1.3-10.4.2.jolla, droid-config-hy004-bluez4 – 0.1.3-10.4.2.jolla, droid-config-hy004-policy-settings – 0.1.3-10.4.2.jolla, droid-config-hy004-pulseaudio-settings – 0.1.3-10.4.2.jolla, droid-config-hy004-preinit-plugin – 0.1.3-10.4.2.jolla, droid-config-hy004 – 0.1.3-10.4.2.jolla
  • Unmet requirements: config(droid-config-hy004) = 0.1.3-10.4.2.jolla, droid-config-hy004 = 0.1.3, droid-config-hy004 = 0.1.3-10.4.2.jolla, hy004-bluez-configs
  • [hy004] Flash splash.img.
  • [hy004] Update upstream droid-configs-device.
  • [hy004] Use proper card profile for routing.
  • [ks] Increase homesize to 1500M.
  • [ks] Make build more tolerant for errors.
  • [ks] Make sure NAME doesn’t have spaces.
  • [ks] Use newer img2simg.
  • [hy004] Add mapplauncherd-booster-silica-qt5-media for default configuration.
  • [hy004] Increase rootfs size for demo content.
  • [mce] Add button backlight configuration.
  • [hy004] Take products from OBS :dhd subproject.
  • [hy004] Upgrade upstream droid-configs-device.
  • [camera] Disable droid camera service.
  • [hy004] Add aliendalvik for suggested features.
  • [hy004] Clean up jolla-configuration pattern.
  • [hy004] Add camera config files.
  • [hy004] Add factory reset support to HY004.
  • [hy004] servicemanager.rc is provided by droid-hal package.
  • [hy004] Add executable bit for flash scripts.
  • [hy004] Initial camera support.
  • [hy004] Do not overwrite usb config when upgrading package.
  • [hy004] Add apkd-config-home to pattern.
  • [hy004] Add jolla-store-apps to default img feature.
  • [hy004] Provide root readable screen configurations.
  • [hy004] Add recovery image.
  • [hy004] Flash kernel and recovery when upgrading.
  • [hy004] Upgrade upstream config to get bluez configs.
  • [hy004] Fix proxymity and als sensor.
  • [hy004] Fix out-of-image-file package name.
  • [hy004] Add usb-moded config files.
  • [hy004] Clean up patterns.
  • [hy004] Initial kickstart configuration with LVM.
  • [hy004] Add droid-hal-init changes.
  • [droid-configs-device] Upgrade latest upstream version
  • [hy004] Add audioflingerglue to the pattern.
  • [hy004] Add bluetooth initialization script.
  • [hy004] Add udev rule for /dev/touchscreen.
  • [hy004] Bring both modems up.
  • [hy004] Do not pull in led control plugin.
  • [hy004] Fix device pretty name.
  • [hy004] Improve vkb haptics.
  • [wlan] Add wlan module loading service.
  • [zypp] Prevent removing main HA packages.

    droid-config-hy005

  • Binaries added : droid-config-hy005-ssu-kickstarts – 0.1.2-10.4.2.jolla, droid-config-hy005-out-of-image-files – 0.1.2-10.4.2.jolla, droid-config-hy005-bluez4 – 0.1.2-10.4.2.jolla, droid-config-hy005-policy-settings – 0.1.2-10.4.2.jolla, droid-config-hy005-pulseaudio-settings – 0.1.2-10.4.2.jolla, droid-config-hy005-bluez5 – 0.1.2-10.4.2.jolla, droid-config-hy005-sailfish – 0.1.2-10.4.2.jolla, droid-config-hy005-patterns – 0.1.2-10.4.2.jolla, droid-config-hy005-flashing – 0.1.2-10.4.2.jolla, droid-config-hy005-kickstart-configuration – 0.1.2-10.4.2.jolla, droid-config-hy005-preinit-plugin – 0.1.2-10.4.2.jolla, droid-config-hy005 – 0.1.2-10.4.2.jolla
  • Unmet requirements: droid-config-hy005 = 0.1.2, config(droid-config-hy005) = 0.1.2-10.4.2.jolla, droid-config-hy005 = 0.1.2-10.4.2.jolla, hy005-bluez-configs
  • [hy005] Flash splash.img.
  • [hy005] Update upstream droid-configs-device.
  • [hy005] Use proper card profile for routing.
  • [ks] Fix issues with larger demo content package.
  • [hy005] Add mapplauncherd-booster-silica-qt5-media for default configuration.
  • [hy005] Increase rootfs size for demo content.
  • [mce] Add button backlight configuration.
  • [hy005] Take products from OBS :dhd subproject.
  • [hy005] Improve vkb haptics.
  • [hy005] Increase Imager root parition size.
  • [theme] Increase launcher icon size and sync pixel ratios.
  • [hy005] Add config files for sensors.qcom
  • [hy005] Upgrade upstream droid-configs-device
  • [hy005] Flash recovery image.
  • [hy005] Replace CUSTOMCONTEXT_NO_BGRA with QT_OPENGL_NO_BGRA.
  • [hy005] Add aliendalvik as suggested feature.
  • [hy005] Add apkd-config-home to pattern.
  • [hy005] Clean up jolla-configuration pattern.
  • [hy005] Provide root readable screen configurations.
  • [hy005] Set 32bit libs for debuggerd.
  • [hy005] Add kernel flashing support after SSU.
  • [hy005] Add usb-moded config files.
  • [hy005] Clean up patterns.
  • [camera] Add camera photo support.
  • [camera] Add camera photo support. Set 32bit libs for needed droid media services, and disable the others.
  • [hy005] Add bluetooth initialization script.
  • [hy005] Add factory reset support for hy005.
  • [hy005] Add udev rule for /dev/touchscreen.
  • [hy005] Bring both modems up.
  • [hy005] droid-hal-device changes.
  • [hy005] Fix pattern to use bluez5.
  • [hy005] Fix pixel ratio to 1.75.
  • [hy005] Initial kickstart configuration with LVM.
  • [hy005] Make hybris textures work on devices without BGRA.
  • [hy005] Require pulseaudio-modules-droid-glue.
  • [hy005] Update upstream droid-configs-device.
  • [hy005] Upgrade upstream droid-configs to get bluez config files
  • [wlan] Add wlan module loading service.

    droid-hal-hy004

  • Binaries added : droid-hal-hy004-tools – 0.0.6-201710171148, droid-hal-hy004-kernel-modules – 0.0.6-201710171148, droid-hal-hy004 – 0.0.6-201710171148, droid-hal-hy004-kernel – 0.0.6-201710171148, droid-hal-hy004-detritus – 0.0.6-201710171148, droid-hal-hy004-devel – 0.0.6-201710171148
  • Unmet requirements: droid-hal-hy004-detritus

    droid-hal-hy004-img-boot

  • Binaries added : droid-hal-hy004-img-boot – 3.10.49.20170811.1-10.2.4.jolla, droid-hal-hy004-img-recovery – 3.10.49.20170811.1-10.2.4.jolla
  • Unmet requirements: droid-config-hy004-flashing
  • [hy004] Add python as build requirement.

    droid-hal-hy005

  • Binaries added : droid-hal-hy005-kernel – 0.0.6-201710171054, droid-hal-hy005-devel – 0.0.6-201710171054, droid-hal-hy005-detritus – 0.0.6-201710171054, droid-hal-hy005 – 0.0.6-201710171054, droid-hal-hy005-kernel-modules – 0.0.6-201710171054, droid-hal-hy005-tools – 0.0.6-201710171054
  • Unmet requirements: droid-hal-hy005-detritus

    droid-hal-hy005-img-boot

  • Binaries added : droid-hal-hy005-img-boot – 3.18.31.20170907.1-10.2.4.jolla, droid-hal-hy005-img-recovery – 3.18.31.20170907.1-10.2.4.jolla
  • Unmet requirements: droid-config-hy005-flashing
  • [hy004] Initial packaging of droid-hal-hy005-img-boot.

    droid-hal-prjconf-hy004

  • Binaries added : droid-hal-prjconf-hy004 – 0.0.1-10.1.1.jolla
  • [prjconf] Add prjconf for hy004.

    droid-hal-prjconf-hy005

  • Binaries added : droid-hal-prjconf-hy005 – 0.0.1-10.1.1.jolla
  • [prjconf] Initial prjconf for hy005.

    droid-hal-version-hy004

  • Binaries added : droid-hal-version-hy004 – 0.0.1-10.2.13.jolla, droid-hal-version-hy004-doc – 0.0.1-10.2.13.jolla
  • Unmet requirements: config(droid-hal-version-hy004) = 0.0.1-10.2.13.jolla
  • [hy004] Do not enable led because we don’t have that.

    droid-hal-version-hy005

  • Binaries added : droid-hal-version-hy005 – 0.0.1-10.2.13.jolla, droid-hal-version-hy005-doc – 0.0.1-10.2.13.jolla
  • Unmet requirements: config(droid-hal-version-hy005) = 0.0.1-10.2.13.jolla
  • [dvd] Initial content.

    droid-system-hy004

  • Binaries added : droid-system-hy004 – 0.0.4-10.1.1.jolla
  • [hy004] Add rpmlintrc file.
  • [hy004] Update to kingsun-delivery-svn-tag-r817.
  • [hy004] Fix core_ctl kernel module loading.
  • [hy004] Initial system partition.

    droid-system-hy005

  • Binaries added : droid-system-hy005 – 0.0.4-10.1.1.jolla
  • [hy005] Add rpmlintrc file.
  • [hy005] Update to kingsun-delivery-svn-tag-r873.
  • [hy005] Disable camera SchedulingPolicyService connection.
  • [hy005] Disable camera SchedulingPolicyService connection.
  • [hy005-system] Initial content.

    harbour-apk-com.adobe.reader

  • Binaries added : harbour-apk-com.adobe.reader – 17.4.1.178813-10.1.1.jolla
  • [packaging] Update to version 17.4.1.178813-178813

    harbour-apk-com.gotomeeting

  • Binaries added : harbour-apk-com.gotomeeting – 2.7.10-10.1.1.jolla
  • [packaging] Update to version 2.7.10-126.

    harbour-apk-com.microsoft.office.excel

  • Binaries added : harbour-apk-com.microsoft.office.excel – 16.0.8528.2074-10.1.1.jolla
  • [packaging] Update to version 16.0.8528.2074-2001431333.

    harbour-apk-com.microsoft.office.word

  • Binaries added : harbour-apk-com.microsoft.office.word – 16.0.8528.2074-10.1.1.jolla
  • [packaging] Update to version 16.0.8528.2074-2001431333.

    harbour-apk-com.shazam.android

  • Binaries added : harbour-apk-com.shazam.android – 8.1.2-10.1.1.jolla
  • [packaging] Update to version 8.1.2-170912-801200.

    harbour-apk-com.skype.raider

  • Binaries added : harbour-apk-com.skype.raider – 7.46.0.596-10.1.1.jolla
  • [packaging] Update to version 7.46.0.596-120455764.

    sailfish-mdm-demo

  • Binaries added : sailfish-mdm-demo – 0.1.4-10.2.4.jolla, sailfish-mdm-demo-server – 0.1.4-10.2.4.jolla
  • Unmet requirements: libsystemsettings.so.0
  • [mdm] Use updated device lock lockout API.
  • [sailfish-mdm-demo] Fix location and wlan settings support.
  • [mdm-demo-client] Try to connect to server always when in unconnected state.
  • [mdm-demo-server] Run mdm demo server as sailfish-mdm and require inet group.
  • [rpm] Increment version.
  • [sailfish-mdm-demo] Add missing policies.
  • [sailfish-mdm-demo] Destroy tcp server when connection is closed.
  • [sailfish-mdm-demo] Show application icons.
  • [sailfish-mdm-demo] Trigger SimInfo update every 10sec.
  • [mdm-demo] Align policy naming.
  • [sailfish-mdm-demo] Increase libsailfishpolicy version requirement.
  • [image] Don’t create root-owned /home/nemo folder during image installation
  • [mdm] Create desktop file for MDM demo app.
  • [mdm] Create service for MDM demo server daemon.
  • [mdm] Fix mdm-demo-server initialisation on boot.
  • [sailfish-mdm-demo] Sort apps.
  • [sailfish-mdm-demo] Encode application icons.
  • [sailfish-mdm-demo] Add software updates to demo.
  • [sailfish-mdm-demo] Integrate device lockout to demo.
  • [mdm-demo] Allow adding devices from device manager user interface.
  • [sailfish-mdm-demo] Add device model that persists itself to a json file.
  • [sailfish-mdm-demo] Expose Sim infos from remote clients.
  • [sailfish-mdm-demo] Implement real gps location support.

    splash-img-hy004

  • Binaries added : splash-img-hy004 – 0.1.0-10.1.1.jolla
  • [hy004] Initial packaging of splash-img.

    splash-img-hy005

  • Binaries added : splash-img-hy005 – 0.1.0-10.1.1.jolla
  • [hy005] Initial packaging of splash-img.

Okt 15 2017

Jala ACCIONE & ACCIONE P + Spezial Edition

Jala ACCIONE & ACCIONE P + Spezial Edition

 

______________________________________________________________________________________________________________

Update 23.10.17

ACCIONE P Spezial Edition

______________________________________________________________________________________________________________

Update 16.10.17

  • ACCIONE: CPU: Snapdragon 212 Quad core + GPU: Qualcomm Adreno 304
  • ACCIONE P: CPU Snapdragon 430 Octa core + GPU: Qualcomm Adreno 505
  • ACCIONE P: hat QuickCharge 2.0
  • ACCIONE P Spezial Edition: wird wohl eine schwarze Rückschale haben und die BASSONE Kopfhörer werden mitgeliefert.
  • Man hat die Wahl welches Betriebssystem man haben möchte, Android oder Sailfish OS.

______________________________________________________________________________________________________________

 

Jala gab gestern auf seinem eigenen Event bekannt das sie zwei Sailfish OS Geräte für seien Latain Amerikanischen Markt herausbringen werden. Die Smartphones wird man zur beginn an in drei Shop, jeweils in den Orten Cochabamba, La Paz und Santa Cruz de la Sierra erwerben können. Bislang wurde noch kein Verkaufsstart angegeben.

 

Beide Geräte sehen nahezu Identisch aus und unterscheiden sich Optisch nur an der Plastik Rückschale. In der Hardwareausstattung sind die Unterschiede größer. Das günstigere ACCIONE das man schon für 149$ bekommt, wird einen Snapdragon Qualcomm® AdrenoTM  Quad-Core CPU,  2GB LPDDR3 RAM, 16GB Internen Speicher, 8 MP Hauptkamera, 5 MP Frontkamera und einen 5″ IPS HD Display 720×1280 Auflösung , einer Pixeldichte von 293 ppi und Helligkeit von 300 cd/m2 haben. Für 100$ mehr bekommt man das ACCIONE  P mit einen Snapdragon Qualcomm® AdrenoTM  Octa-core CPU, 3GB LPDDR3 RAM, 32GB Internen Speicher, 13 MP Hauptkamera, ebenso eine 5MP Frontkamera und einen 5″ IPS Full-HD Display 1080×1980 Auflösung,  einer Pixeldichte von 441 ppi und hat Helligkeit bis zu 400 cd/m2. Des Weiteren besitzt das 100$ teurere Modell zusätzlich noch weitere Sensoren wie Gyroskop, Magnetometer, einen Fingerabruck-Sensor der auf der Rückschale befindet, NFC Support und die Unterstützung von WiFi CAST.

Beide Geräte haben eine identische Abmessung von 150x73x9mm und wiegen 145g, sind Dual-Sim (Nano-Sim) und LTE fähig. Band 20 fehlt jedoch bei beiden. Der Speicher kann mittels microSD Karte bei jeweiligen Gerät bis zu 128GB erweitert werden. Die Akku Leistung bei Musik hören beträgt beim ACCIONE ca 20 Stunden und beim ACCIONE P 18,5 Stunden. Eine genauere mAh angabe fehlt jedoch.

Jala gab überraschenderweise bekannt das vom ACCIONE P eine Spezial Edition erscheinen wird. Preislich liegt er bei 299$. Gerüchte zu folge soll das Smartphone einen hochwertigen Aluminium Rückschale erhalten. Leider gibt es hierzu keine weiteren Informationen.

Okt 13 2017

Jolla Pressemitteilung: Jala kündigt zwei Smartphones an

Jolla gab heute morgen eine neue Pressemitteilung raus. Wie bereits berichtet wird Jala Group heute um 18 Uhr (Bolivien – Deutschland: 14.10 – 0 Uhr) seine zwei Smartphones mit Sailfish OS vorstellen. Es erscheinen zwei ACCIONE Geräte die in Bolivien vermarktet werden.

 

Hier eine Übersetzung der Pressemitteilung:

 

Jolla’s Sailfish OS plant eine Erweiterung nach Lateinamerika: Jala Group und Jolla kündigen eine neue Entwickler-Initiative an

Cochabamba, Bolivien, 13. Oktober 2017 — Jolla Ltd, die finnische Mobilgesellschaft und Entwickler des offenen mobilen Betriebssystems Sailfish OS, und ihr Partner Jala Group, Begründerin der bolivianischen High-Tech-Industrie, beschreiten einen neuen Meilenstein in der Geschichte der Technologie in Lateinamerika. Heute kündigten sie das „Sailfish Beta Programm“ an, sowie neue ACCIONE Smartphones mit Sailfish OS. Die neue Entwickler-Initiative zielt darauf ab, die speziellen Bedürfnisse Lateinamerikas mit der Entwicklung eines eigens für sie designten mobilen Betriebssystems abzudecken.

Die heutige Ankündigung mit der Jala Group bringt Jolla’s regionale Sailfish-Strategie einen kraftvollen Schub. Mit den existierenden Projekten in China und Russland ist diese Kooperation der nächste Schritt, um regionale mobile Ecosysteme mit Sailfish OS weiter voranzutreiben.

Für die Jala Group ist das Sailfish Beta Programm die erste Phase der Firmen-Mission: Lateinamerikas technologische Unabhängigkeit, und ein Fundament für eine selbst kontrollierte digitale Wirtschaft.

Jorge Lopez, Gründer und CEO der Jala Group: „Heutzutage stehen wir einer der größten einer Herausforderungen der digitalen Ära gegenüber, der Digitalisierung der Wirtschaft, und wir fragen uns alle: Welche Rolle spielt Lateinamerika in dieser Zukunft? Mit dem Start des Sailfish Beta Programms und dem Verkaufsstart der ACCIONE Geräte wird die Jala Group ihre Vision stärken, dass Bolivien eine Software erschaffen und entwickeln kann, die für den ganzen Kontinent einen Mehrwert bietet. Es ist an der Zeit, dass wir nicht mehr nur Konsumenten von Technologie in Form von Produkten sind. Jetzt werden wir unser eigenes, intellektuelles Eigentum schaffen.“

Sami Pienimäki, Co-Gründer und CEO von Jolla: „Die Zusammenarbeit mit der Jala Group und dem lateinamerikanischen Markt ist ein großartiger Schritt, der unsere regionale Strategie festigen wird. Sailfish OS ist das einzige mobile Betriebssystem der Welt, dass die Möglichkeit einer regionalen technologischen Unabhängigkeit bietet, was dem großen lateinamerikanischen Markt bisher gefehlt hat. Es ist eine langfristiges Anliegen, und wir freuen uns über die Kooperation mit der Jala Group.“

Direkt nach der Veröffentlichung wird die Jala Group damit beginnen, Mitglieder für das Sailfish Beta Programm aus den Communities der Entwickler und Ingenieure in Bolivien zu gewinnen, sowie regulären Nutzern von Mobilgeräten. Ziel der ersten Phase des Programms sind Informationssammlung und Entwicklung: Nutzer-Input sowie Feedback, und die Entwicklung eines lokalen Codes sowie Apps für Sailfish OS.

Gleichzeitig kündigte die Jala Group an, dass ihre ersten Mobilgeräte verfügbar sind: zwei ACCIONE Smartphones mit Sailfish OS. Die neuen ACCIONE Geräte werden einen zentralen Punkt im Sailfish Beta Programm darstellen.

 

Quelle: Jolla.com

Okt 13 2017

[HowTo] Sony Xperia X – Kaufen, Bootloader, Flashen unter Windows

[HowTo] Sony Xperia X – Kaufen, Bootloader, Flashen unter Windows

 

Wie schon angekündigt hier eine sehr detaillierte Anleitung für die Windows Nutzer. In dieser Anleitung werden die Schritte erklärt wie man sein Windows vorbereitet, Sailfish X kauft, den Bootloader Entsperrt und sein Smartphone auf Sailfish X Flasht.

Ein RIESEN DANK für die Mühe geht an den User „ES“ bzw. „Edi“ aus der deutschsprachigen Telegram Gruppe.

 

Achtung: Diese Anleitung beinhaltet keine Erklärung wie ihr euch die DRM-Keys sichert!

 

Inhaltsverzeichnis
1.0 Was wird benötigt
2.0 Bezahlvorgang für Sailfish OS Xperia XTM
Step 1 Please select your payment method
Step 2 Enter your Payment Details
3.0 Installationsanleitung von Jolla durchführen
3.1 Installiere das aktuellste Android Update Deines Gerätes
3.1.1 Falls der Bootloader Deines Gerätes gelockt ist
3.2 Falls der Bootloader des Gerätes nicht gelockt ist
4.0 Installiere den fastboot Treiber
5.0 Entpacke die Sailfish OS .zip Datei
6.0. Bootloader entsperren
7.0 Download der Sony vendor binary images
8.0 Flashe Sailfish X auf Dein Xperia

 

1.0 Was wird benötigt.

1.1 Sony Xperia X Single SIM (F5121), Verifiziere, dass ein freischaltbarer Bootloader vorhanden ist
1.2 Micro USB Kabel
1.3 Internet Verbindung
1.4. Windows Computer

2.0 Bezahlvorgang für Sailfish OS Xperia X
Benutzer die sich im Newslettersystem eingetragen haben. Bekommen die folgende E-Mail.

Mit Klick auf den Button „Buy Now“ werdet Ihr zum Shop von Jolla weitergeleitet. (personalisierter Link)
Alternativ direkt über die Webseite. https://shop.jolla.com/

Loggt Euch mit Eurem Benutzernamen ein.
Falls Ihr noch nicht registriert seid müsst Ihr einen Account anlegen.

Im Shop setzt Ihr den Haken bei …

… ggf. noch den Voucher Code eingeben …
und drückt dann den „Pay“ -Button

Step 1 Please select your payment method
Im nächsten Schritt wählt Ihr die Bezahlmethode aus.

Step 2 Enter your Payment Details
…gebt Eure Daten der Kreditkarte ein und bestätigt die Zahlung

Den Downloadlink https://shop.jolla.com/downloads
in der E-Mail anklicken und das Image runter laden.

 

3.0 Installationsanleitung von Jolla durchführen

Stelle sicher, dass Du die ganze Anleitung gelesen hast, bevor Du diesen Schritt startest.

3.1 Installiere das aktuellste Android Update Deines Gerätes.

3.1.1 Falls der Bootloader Deines Gerätes gelockt ist

3.1.1.1 Update durch die OTA Funktion Deines Gerätes.

 

Gehe Einstellung      >      Über das Telefon      >      Software Update

  

3.1.1.2 ggf Updates mehrmals wiederholen bis die neueste Version installiert ist.
3.1.1.3. Nachdem alle Updates erledigt sind zeigt das Gerät folgenden Hinweis.

3.1.1.3 Überprüfen der Build Nummer.

Stelle sicher, dass die Build-Nummer 34.3.A.0.228 oder höher ist.

 

3.2 Falls der Bootloader des Gerätes nicht gelockt ist:

3.2.1 Download und installiere das Emma Programm von Sony’s developer Webseite
https://developer.sonymobile.com/open-devices/flash-tool/how-to-download-and-install-the-flash-tool/

INFO: Sony unterstützt das Emma Programm nur für Windows.

3.2.2 Schalte Dein Gerät aus. Lasse es für mindestens fünfzehn (15) Sekunden aus
.
3.2.3 Halte die ‘Volume down’ Taste Deines Gerätes gedrückt während Du das Gerät über das USB Kabel
mit dem Computer verbindest. Die LED in der Nähe des Lautsprechers Deines Gerätes sollte nun grün
leuchten.

3.2.4 Starte das Emma Programm und folge den Anweisungen. Bitte stelle sicher dass Du die letzte
Android Version mit der Build Nummer 34.3.A.0.228 oder höher installiert hast.

3.2.5 Starte Android auf Deinem Gerät und gehe durch den den Setup-Assistenten bis Du im Android-
Sperrbildschirm landest (Du kannst so viele Schritte wie möglich überspringen).

3.2.6 Fahre Dein Gerät herunter und mach Dich bereit Sailfish X zu installieren

 

4.0 Installiere den fastboot Treiber

Wenn Windows den fastboot Treiber automatisch findet, kannst Du zum Kapitel 5.0 springen. Wird der
Treiber nicht gefunden, muss dieser manuell installiert werden. Hier sind die Anweisungen dazu.

4.1 Während das Gerät aus ist halte die „Volume Up“ Taste Deines Gerätes und verbinde dieses über USB
mit dem Computer. Die LED in Nähe des Lautsprechers Deines Gerätes sollte blau leuchten.

4.2 Download des Xperia X fastboot Treibers von der Sony’s Webseite
https://developer.sonymobile.com/downloads/drivers/xperia-x-driver/

4.3 Klicke Rechts auf die gepackte Zip-Datei xperia-x-driver.zip file, und extrahiere dieses in ein Verzeichnis

4.4 Öffne den Geräte Manager

4.4.1 Unter Windows 7, klicke im Desktop rechts auf das ‘Computer’ Icon

und wähle ‘Verwalten’.

Hinweis: Solltest Du nicht mit einem Administrator Account angemeldet sein, erfolgt noch die Abfrage des
Passworts.

Wenn die Computerverwaltung geöffnet wurde, wähle den Gerätemanager aus.

4.4.2 Unter Windows 8 & 10, findest Du den Gerätemanager wenn Du mit dem Rechts-Klick auf den Start
Button oder wenn Du die Windows # X Taste der Tastatur drückst.

4.5 Du findest den ‘S1Boot Fastboot’ Gerät im Verzeichnis des Gerätemanagers. Wenn dieser nicht
ordnungsgemäß installiert wurde zeigt sich dieser mir einem Warnzeichen.

4.6 Klicke Rechts und wähle „Treibersoftware aktualisieren.

4.8 dann „Auf dem Computer nach Treibersoftware suchen“

4.9 Select “Aus einer Liste von Gerätetreibern auf dem Computer auswählen”

4.10 Select “Zeige alle Geräte”

4.11 Select “Datenträger”

4.12 Select “Durchsuchen…” und gehe zum Verzeichnis wo sich das entpackte Treiberpaket aus Schritt 4.3
befindet.

4.13 Wähle die Treiberinformationsdatei mit dem Namen ‘sa0114adb’ in diesem Verzeichnis aus und klicke
„Öffnen“

4.14 Dann klicke “OK”

4.15 Nun solltest Du in der Modell Liste den “Sony sa0114 ADB Interface Driver” sehen.

4.16 Klicke auf „Weiter“

4.17 Die “Update Treiber Warnung” bestätigst Du mir “Ja”

4.18 Zum Schluss sollst Du sehen, dass “Windows den Treiber erfolgreich upgedatet hat” und Du kannst nun das Fenster schließen.

Nun ist das Gerät bereit um den Bootloader zu entsperren.

 

5.0 Entpacke die Sailfish OS .zip Datei

5.1 Ab diesem Kapitel benötigen wir die heruntergeladenen Datei SailfishOS-2.1.3.5-1-f5121-0.0.1.16.zip
aus dem Jolla Shop https://shop.jolla.com/downloads

5.2 Entpacke diese Datei in ein Verzeichnis. In diesem Verzeichnis findest du die fastboot binary, die für
Kapitel 7.0 benötigt wird.

 

6.0. Bootloader entsperren

6.1 Instruktionen zum Entsperrprozess findest Du auf der Sony Open Devices Webseite.
https://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/

…..scrolle runter zu folgendem Eintrag ….

… und wähle Xperia X …

 

Um das Xperia X zu entsperren, bereiten Sie es folgendermaßen vor.

1. Gehe in die Einstellungen > Über das Telefon und tippe sieben mal auf „Build-Nummer“ um den
Entwickler Modus einzuschalten.

2. Gehe zurück zu den Einstellungen. Ein neuer Menüpunkt „Entwickleroptionen“ ist hinzugefügt
worden. Entwickleroption und schalte OEM-Entsperrung ein,

Hinweis: Sollte das Gerät mit einem Muster oder Pincode geschützt worden sein, müsste folgende Abfrage
noch bestätigt werden.

Warnung: Die Geräteschutzfunktionen funktionieren an diesem Gerät nicht, wenn diese Einstellung aktiviert
ist.Bitte beachten! Es ist nur möglich, den Bootloader für bestimmte Releases zu entsperren. Sie können
überprüfen, ob der Bootloader Ihres Geräts im Servicemenü entsperrt werden kann, indem Sie die folgenden
Schritte ausführen:

  1. In your device, open the dialler and enter *#*#7378423#*#* to access the service menu.
  2. Tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you
    can continue with the next step. If it says No, or if the status is missing, your device cannot be
    unlocked.

Weiter geht’s auf der Sony Webseite mit Klick auf den Button „Continue“

Nun werdet Ihr aufgefordert, Eure E-Mail Adresse einzugeben.

Setzt einen Haken auf Terms & Conditions, einen Haken bei I’m not a robot (hier folgt eine Captcha
Abfrage)

Wenn die Abfrage verifiziert wurde klickt Ihr dann auf den Submit Button.

 

In Deinem E-Mail Postfach müsste nun eine E-Mail eingetroffen sein …

.. um Deine E-Mailadresse zu verifizieren klickst Du in der erhaltenen E-Mail auf „Click here to proceed“…

… Du wirst dann zum nächsten Schritt weitergeleitet. Gebe nun in der Telefonapp Deines Xperia X den code
*#06# ein und Deine IMEI Nummer wird angezeigt. Gebe diese Nummer auf der Sony Webseite ein, setze
einen Haken bei Terms & conditions und bestätige die Eingabe.

Der Entsperrcode wird Dir nun angezeigt.

 

Folge den Anweisung zur Installation der Komponenten die benötigt werden um den Bootloader zu
entsperren.

A. Installiere die Android SDK und die Geräte Treber

1. Lade Dir die Android SDK http://developer.android.com/sdk/index.html von der Webseite …. herunter und installiere diese.
Der SDK-Manager ist in Android Studio enthalten. Du muss jedoch nicht mehr als die grundlegenden Android-Befehlszeilentools
installieren. Diese finden Sie am Ende der Webseite. https://dl.google.com/android/repository/sdk-tools-windows-3859397.zip

Tipp: Beachten Sie den Installationspfad. Möglicherweise müssen Sie später auf bestimmte Dateien zugreifen.
Als Windows Benutzer werden zusätzliche Treiber benötigt.
1. When completing the installation, open the Android SDK Manager and go to the Extras folder to install the Google USB driver.

2. Download and install an updated Fastboot driver. This is the standardandroid_winusb.inf-file, with a few lines of code added to
enable Fastboot to support Sony devices.

3. Replace the original android_winusb.inf-file with the downloaded file in theusb_driver folder, located in the Android >sdk > extras > google folder on your computer.

2. On your device, turn on USB debugging by going to Settings > Developer options and click to enable USB debugging.
a. If your device is Android Jelly Bean 4.2 or newer: Developer options are hidden by default. To enable, tap on Settings > About
Phone > Build Version multiple times. Then, turn on USB debugging by going to Settings > Developer options.

 

B. Zu Fastboot verbinden

1. Schalte Dein XperiaTM X aus.
2. Verbinde ein USB-Kabel mit Deinem Computer.
3.Am XperiaTM X, drücke die Volume up Taste zur gleichen Zeit während Du das andere Ende des USB kabel verbindest.

a. Windows users: When asked for a driver, open the Devices and Printers directory, click on the fastboot driver and press Update. Browse and point towards the location of the new android_winbus.inf file.

4. Wenn das Gerät vebunden ist, öffne eine Kommandozeile auf Deinem Computer .
When your device is connected, open a command window on your computer and go to the platform-tools folder within the Android
SDK folder.
5.gebe folgendes Kommando ein
fastboot devices
6. Überprüfe dass Du keine Fehler in der Rückmeldung bekommen hast

C. Gebe den Entsperrccode ein

WARNING! The command below contains your unlock key. If you perform this step, you will unlock the boot loader. This may void your warranty and/or any warranty from your operator.

1. Das Kommando zum Ensperren des Bootloaders lautet.

fastboot -i 0x0fce oem unlock 0x1234567890987654

Beispiel Entsperrcode 1234567890987654. Diesen itte durch Deinen Entsperrcode ersetzen

2. Überprüfe, dass Du eine Rückmeldung ohne Fehler bekommen hast.

D. Der Bootloader wurde entsperrt.

 

7.0 Download der Sony vendor binary images

7.1 Download des Sony binary image mit dem Namen
SW_binaries_for_Xperia_AOSP_M_MR1_3.10_v13_loire.zip für das XperiaTM X.

Diese bekommst Du hier https://developer.sonymobile.com/downloads/software-binaries/software-binaries-
for-aosp-marshmallow-android-6-0-1-kernel-3-10-loire/

Klick auf Download …

… Scrolle bis ans Ende …

… und klicke auf den Button „Accept“ und speichere die Datei ab.

5.2 Entpacke die SW_binaries_for_Xperia_AOSP_M_MR1_3.10_v13_loire.zip Datei.

5.3 Entpackt die „SailfishOS-2.1.3.5-1-f5121-0.0.1.16.zip“ aus „2.0 Bezahlvorgang für Sailfish OS Xperia XTM  >  Step2“

5.4 Kopiere die entpackte SW_binaries_for_Xperia_AOSP_M_MR1_3.10_v13_loire.img und fügt die in den Entpackten Ordner „SailfishOS-2.1.3.5-1-f5121-0.0.1.16“

 

8.0 Flashe Sailfish X auf Dein Xperia

Verbinde Dein Gerät mit dem PC in den Fastboot Mode wie folgt:

8.1 Trenne Dein XperiaTM Gerät von Deinem PC

8.2 Schalte das Gerät aus. Lasse es für mindestens (15) Sekunden aus

8.3 Verbinde ein Ende des USB Kabels mit Deinem PC

8.4 Während die ‘Volume Up’ Taste gehalten wird, , verbinde das andere Ende des USB-Kabels mit Deinem XperiaTM Gerät. Die LED in der Nähe der Lautsprecher Deines Gerätessollten blau leuchten.

8.5 Unter Windows werden die fastboot Treiber benötigt, um das Gerät ordnungsgemäß zu erkennen wie es für den Entsperrprozess benötigt wird.

Wenn diese zur Installation benötigt werden schau Dir die Anleitung in Kapitel 4.0 an.

8.6 Unter Windows 7, 8 & 10, Doppelklick die ‘flash-on-windows.bat’.Datei.
Falls Windows Dich warnt den PC schützen zu wollen in dem das Skript vor der Ausführung gestoppt wird
klicke auf More Info’ then ‘Run anyway’.

8.7 Folge den Anleitungen im Windows Konsolenfenster

8.8 Wenn das Flashen beendet wurde, starte Dein Sailfish X Gerät neu.

Okt 13 2017

[HowTo] Sailfish X (Offizielles Image) unter Linux Flashen

[HowTo] Sailfish X (Offizielles Image) unter Linux Flashen

 

 

Nach der dreiteiligen HowTo wie man seine DRM-Keys sichert, SFOS Community Flasht und das Gerät wieder auf Werkszustand zurück versetzt, kommen zwei weitere Anleitungen. Diese wird allerdings recht kurz werden, da das Flashen nur minimal von der Community Image abweicht. Die zweite Anleitung widmet sich für die Windows Nutzer, mehr in kürze.

 

DRM-Keys sichern und Bootloader Entsperren

Ihr besitzt ein neues und unberührtes Sony Xperia X (F5121) und habt euer Bootloader noch nicht entsperrt ? Möchtet eure DRM-Keys sichern falls Ihr euer Gerät auf Werkszustand zurück versetzen wollt ? Sei es um auf Android zurück zu kehren und die Kamera und Co Features zu erhalten oder weil ihr das Gerät zur Reparatur schicken müsst, dann liest und befolgt folgende Anleitung:

[Howto] Sony Xperia X – Teil 1 – CDA, DRM-Keys, Bootloader

 

Habt ihr schon bereits euer Bootloader Entsperrt und/oder das Sailfish OS Community Image aufgespielt, dann befolgt die weiteren Schritte

 

Firmware 34.3.A.0.228 oder höher Flashen

Um Sailfish X aufspielen zu können solltet ihr mindestens die Firmware 34.3.A.0.228 auf euer Gerät haben. Wie ihr die Firmware herunter lädt und aufspielt, findet ihr die Beschreibung im dritten Teil des HowTo’s.

Wichtig: Befolgt nur diesen einen teil der Anleitung: Android mit richtiger CMA/Branding Flashen. Dabei ist es diesmal NICHT wichtig welche CDA/Branding ihr dort herunter lädt. Ich Empfehle euch die 1303-2543 – Germany – Customized DE – 34.3.A.0.238 / R5D zu nehmen.

[Howto] Sony Xperia X – Teil 3 – Alles auf Werkszustand zurücksetzen

 

Offizielles Sailfish X Flashen

Nach dem ihr nun die richtige Android Firmware aufgespielt, starten wir das Gerät einmal bis ihr zum Einstellungsassistenten gelangt. Ihr müsst nichts auswählen oder einrichten, schaltet das Gerät direkt wieder aus.

Nachdem ihr Sailfish X gekauft habt, erhält ihr per E-Mail ein Download Link zu der „SailfishOS-2.1.3.5-1-f5121-0.0.1.16.zip“ Datei.  Zusätzlich benötigen wir „SW_binaries_for_Xperia_AOSP_M_MR1_3.10_v13_loire.zip

 

  1. Entpackt die „SailfishOS-2.1.3.5-1-f5121-0.0.1.16.zip“ Datei.
  2. Ebenso entpacken wir die „SW_binaries_for_Xperia_AOSP_M_MR1_3.10_v13_loire.zip“ Datei.
  3. Die entpackte „SW_binaries_for_Xperia_AOSP_M_MR1_3.10_v13_loire.img“ Datei verschieben wir in den „SailfishOS-2.1.3.5-1-f5121-0.0.1.16“ Ordner.
  4. Öffnet nun euer Terminal am PC und wechselt in den „SailfishOS-2.1.3.5-1-f5121-0.0.1.16“ Ordner. „Bsp: cd ~/Downloads/SailfishOS-2.1.3.5-1-f5121-0.0.1.16
  5. Nun machen wir die „flash.sh“ Datei ausführbar: chmod +x flash.sh
  6. Haltet am Gerät die VOLUMEN-LAUT-Taste gedrückt und schließt das Gerät an euer PC. Wenn die LED Blau leuchtet könnt ihr Taste wieder los lassen.
  7. Nun führen wir die „flash.sh“ aus: sudo ./flash.sh

 

Das Flashen dauert nur ein paar Minuten. Ihr bekommt im Terminal die Info, dass ihr das USB Kabel abziehen sollt und das Gerät startet.

Das war es auch schon. Nun habt ihr die Offizielle Sailfish X Firmware auf euer Smartphone 🙂

 

Okt 04 2017

Sailfish X Image nun erhältlich – Update

Sailfish X Image nun erhältlich

 

____________________________________________________________________________

Update 11.10.2017 – Sailfish X erschienen

Sailfish X ist am 11.10.2017 nun endlich erschienen. Alle haben die Möglichkeit das OS für 49,90€ zu erwerben. Jolla C Besitzer die das Gerät im Jolla Store erworben haben erhalten in kürze ein 20% Rabatt Code und sparen somit 10€. Leider kann man zur Zeit nur mit einer Kreditkarte bezahlen. Offen bleibt ob Jolla in Zukunft weitere Zahlungsmöglichkeiten hinzufügt.

Nach dem man es erworben hat bekommt man links zum Download des Image sowie eine Anleitung wie man das unter Windows auf sein Gerät Bespielt.  Eine deutsche Anleitung für Windows und Linux User folgt demnächst. Unter Linux ändert sich die Prozedur nur minimal.

 

____________________________________________________________________________

Update 05.10.2017 – Text Angepasst:

Wie hoch der Erlass für die Tablet Refund User beträgt ist noch nicht bekannt. Kunden die auf ihre Tablet Rückerstattung warten erhalten einen Vouchercode der die Summe auf 0€ senkt. Den Rest des Geldes kann man entweder an Jolla spenden oder für Produkte zahlen die eventuell mal im Online Shop verfügbar sein werden.

____________________________________________________________________________

 

Nachdem die Vorbestellung sich um eine Woche verschoben hat ist es heute nun soweit. Der Jolla Online Shop „shop.jolla.com“ ist wieder erreichbar und präsentiert sich mit einer neuen Oberfläche. Die Produktseite „https://jolla.com/sailfishX/“ wurde ebenso überarbeitet. Auf dem Online Shop kann man sich weiterhin mit seinem alten Account einloggen.

 

Vorbestellung Erstmal nur für die Tablet Refund User

Vorbestellen können zur Zeit nur die Tablet User die auf ihre zweite Hälfte der Rückerstattung warten. Die betroffenen erhalten per E-Mail einen Voucher-Code die sie dann einlösen können. Der Verkaufsstart für alle andere beginnt in der kommende Woche. Preislich kostet das Image 49,90€ (Inkl. 24% MwsT). Wie hoch der Erlass für die Tablet Refund User beträgt ist noch nicht bekannt. Kunden die auf ihre Tablet Rückerstattung warten erhalten einen Vouchercode der die Summe auf 0€ senkt. Den Rest des Geldes kann man entweder an Jolla spenden oder für Produkte zahlen die eventuell mal im Online Shop verfügbar sein werden.

Wer damals das Jolla C über das Online Shop erworben hat erhält ebenso ein Rabatt in Höhe von 20%, dadurch senkt der Preis auf 39,90€. Die Auslieferung des Image soll am 11.10.2017 starten.

Das Image kann zur Zeit „nur“ aus EU Länder sowie Norwegen und Schweiz erworben werden. Jolla versucht den Online Shop zu erweitern bzw. für andere Länder freizuschalten.

Gründe wieso die Tablet Gruppe bevorzugt wird sind diese, weil Sie schon sehr lange auf ihre Rückerstattung warten mussten und des Weiteren weil Jolla ihr Voucher-System Testen möchte. Bei Fehler möchte sie so schnell wie möglich handeln und die Probleme lösen können.

 

Community Version

Sailfish OS für das Xperia X wird weiterhin kostenlos über das Community Image verfügbar sein. Wer also noch unsicher ist ob Sailfish OS überhaupt das richtige ist, kann sich das Image vorher auf seinem Smartphone Flashen und testen.

 

Die Unterschiede zur kostenpflichtigen Jolla Image:

  • Aliendalvik Support. Android Applikationen bis Version 4.4.4 können Installiert werden.
  • Microsoft Exchange Support
  • Worterkennung für die Mallit-Tastatur
  • 1 Jahr Updates

Wer all das nicht braucht wird mit der kostenlose Community Version gut bedient.

 

 

Kurz Video – Flashen unter Windows

Okt 03 2017

[Howto] Sony Xperia X – Teil 3 – Alles auf Werkszustand zurücksetzen

[Howto] Sony Xperia X – Teil 3 – Alles auf Werkszustand zurücksetzen

 

 

Der dritte und letzte Teil der Howto’s reihe befasst sich darüber, wie man sein Xperia X wieder komplett in Werkszustand zurücksetzt. Gründe gibt es einige, entweder man mag Sailfish OS nicht, ihr wollt das Gerät verkaufen oder aber auch zur Reparatur einschicken. Wobei letztes nicht Garantiert ist, da man zuvor den Bootloader Entsperren musste. Dennoch erkläre ich auch hier wie ihr euer Gerät die DRM-Keys aufspielt und die richtige CDA Firmware Installiert.

 

Was benötigen wir?

  1. Flashtool + XperiFirm
  2. Android 6.0.1(Commerial and Journalists)
  3. Android Firmware mit euer CDA/Branding
  4. TWRP-Recovery (Download)
  5. euren gesicherte DRM-Keys Datei
Vorgehensweise
  • Folgende schritte werden gemacht. Zunächst bespielen wir Android 6.0.1, danach TWRP um die DRM-Keys einzuspielen. Wir besorgen uns die passende Firmware mit der richtigen CDA/Branding Information und bespielen diese auf das Smartphone.

 

Android 6.0.1 Flashen

 

  1. Die passende FTF-Datei aus Teil 1 haben wir bereits, falls nicht, liest euch den ersten Teil durch.
  2. Startet das Flashtool ohne Root-Rechten: sudo ./FlashTool
  3. Klickt oben links auf das Blitz-Symbol und im neuen Fenster „Flashmode“.
  4. Wechselt unter Source folder ins FlashTool Pfad: /home/EUER_NAME/.flashTool/firmwares
  5. Links unter Firmware folgen wir den Pfad „Sony Xperia X > F5121 > Commercial and Journalists > 34.0.A.1.264
  6. Rechts bei Wipe unter Sin wählen wir alles aus „APPS_LOG, DIAG, SSD, USERDATA“ und klicken rechts unten auf „Flash„. Der Flashvorgang wird vorbereitet
  7. Ihr werdet aufgefordert die VOL-LEISE-Taste zu halten und das microUSB Kabel anzustecken. Nachdem ihr das gemacht habt öffnet sich nach ein paar Sekunden ein Fenster mit der Frage, ob das 34.0.fsc Script genutzt werden soll, darauf antworten wir mit „JA“
  8. Sobald der Flashvorgang fertig ist werdet ihr aufgefordert das microUSB Kabel abzuziehen und das Smartphone zu starten.
  9. Überspringt alle Fragen und Einstellungen die am Start gefragt werden um ins Menü zu gelangen.
  10. Geht in die Einstellungen > Über das Telefon > tippt 7x auf Build-Nummer um die Entwickleroption zu Aktivieren. Aktiviert dort die „USB-Debugging“. Schaltet das Gerät aus.

 

TWRP-Recovery

 

  1. Öffnet den Terminal und wechselt in den Ordner wo ihr das TWRP Image heruntergeladene habt.
  2. mit folgenden Kommandozeile Flashen wir TWRP (Rote Markierung kann abweichen): sudo fastboot flash recovery twrp-3.1.1-suzu-2017.07.16.img
  3. Zieht das Kabel ab und startet das Smartphone mit gedrückter VOLUME-LEISE-Taste + An/Aus Knopf.Sobald das Smartphone angeht lässt ihr das An/Aus-Taste los. TWRP wird gestartet.

 

DRM-Keys einspielen

 

  1. Wir befinden und in TWRP-Recovery
  2. Schließt das Gerät per USB-Kabel an den PC
  3. Kopiert nun euren TABackup (Bsp: TA_F5121_BHXXXXXK_20170703-2149.img) der im „backupTA_v2 Ordner“ befindet auf euer Smartphone. Benennt die Datei am besten in TAbackup.img um!
  4. In TWRP starten wir den File Manager „Advance > File Manager“ und gehe ins „external_sd“ Ordner. Dort finden wir unsere TAbackup.img Dateien. Haltet die Datei fest und kopiert diese. Darauf hin geht ihr zurück bis ins Root Verzeichnis und folgt dann den Pfad „/data/local/tmp“ und fügt die Datei dort rein in dem ihr unten rechts auf dem Blauen Knopf drückt.
  5. Auf dem PC gibt ihr nun folgendes in den Terminal ein: adb shell dd if=/data/local/tmp/TAbackup.img of=/dev/block/bootdevice/by-name/TA
  6. Zieht das USB Kabel wieder ab und schalten wir das Gerät wieder aus: TWRP > Reboot > Shutdown

 

Android mit richtiger CMA/Branding Flashen

 

  1. Startet das FlashTool mit Root-Rechen: sudo ./FlashTool
  2. Klickt mittig auf das schwarze XF -Symbol
  3. Wir folgenden folgen Pfad (links) Smartphone (2016) > Xperia X (suzu) > F5121
  4. rechts wählen wir unser passenden CDA Firmware aus. Da mein Gerät von der Telekom war wäre meine passende Firmware die „1302-4806″ . Klickt man die Zeile an so erscheint rechts die passende Firmware (in meinem Fall 34.0.A.1.264), worauf wir einmal drauf Klicken. In meinen Fall wäre es die 34.0.A.1.264
  5. ein neues Fenster erscheint. Dort können wir die Firmware direkt herunterladen.
  6. Nach dem Download schließen wir XperiaFirm. In FlashTool werden wir gefragt ob das angegeben Script genutzt werden soll? Antworten wir mit JA. FlashTool bereitet die Firmware vor und speichert dies in den richtigen Pfad.
  7. Nun befolgen wir oben den Schritt „Android 6.0.1 Flashen“ noch ein mal, nur nehmen wir statt dessen unsere neuere Firmware. Unter Wipe Sin wählen wir alles aus „APPS_LOG, DIAG, PERIST, QNOVO, SSD, USERDATA“. Es ist möglich,  dass in euer Firmware weniger Einträge existieren.
DRM-Keys

 

  1. Um die DRM-Keys Status zu überprüfen rufen wir folge Code an: *#*#7378423#*#*
  2. Klickt auf „Service tests > Security“ – WIDEVINE und CKB sollten nun den Status: [Key OK] [Acive] haben. OTP_LOCK_STATUS: LOCKED. Somit sind unsere DRM-Keys wieder vorhanden.

 

Gratuliere! Ihr habt das Gerät nun komplett auf Werkszustand zurückgesetzt. Der Bootloader wird beim Aufspielen einer normalen FIrmware wieder geschlossen. Die Sicherheitshinweis verschwindet beim Booten des Gerätes.

 

 

 

 

 

Okt 02 2017

02.10.2017 – Firmware Update 2.1.2.3 (Kiiminkijoki)

Firmware Update 2.1.2.3 (Kiiminkijoki)

 

SFOS 2.1.2.3 ist nun für die Early Access User erschienen. Diesmal sind zwar keine neuen Features dazu gekommen, dafür dutzende bugs behoben die auf together.jolla.com reportet wurden sowie viele Verbesserungen. Die Dropbox API wurde aktualisiert, somit funktioniert die Synchronisation wieder. 2.1.2 enthält auch die grundlegende Unterstützung für das Sony Xperia X Gerät.

 

Highlights

  • webM/VP8 Support für Webbrowser und Galerie
  • Dropbox API auf v2 aktualisiert

 

 

Release Highlights

This list contains examples of new features (and some bug fixes) added to SailfishOS since the 2.1.1 release. The release notes of upgrade 2.1.1 (which did not roll out for all users) can we found here: https://together.jolla.com/question/164349/release-notes-211-jamsanjoki/ .

Accounts

  • Dropbox support migrated from deprecated to newer V2 API.

Aliendalvik

  • Updated Android Support of Jolla Tablet and Jolla C to version 1.0.69-1 (no update for Jolla1)
  • Fixed the issue of autocaps stop working after typing ~100 characters
  • Fixed the issue of installing apps with apkd-install immediately after device boot up
  • Fixed the issue of installing apps with apkd-install immediately after installing Android Support
  • Video files sorted under correct date now, makin it easier to find them for sharing
  • Two issues with QQ aopp fixed
  • Some inprovements to show document files (.pdf, .doc, etc.) in Android apps. This may still require using an Android file manager app
  • GPS service for Android apps is more robust now
  • Vibration fixed on Android messaging apps
  • Co-operation of Tracker and Android Support at boot up improved
  • TJC: Spotify music stream is now paused on unplugging headphones
  • TJC: Android applications on Tablet follow the system language now.

Browser

  • support for webM/VP8 playback in Browser/Gallery (has been there for sometime).

Connectivity

  • Connecting to mobile data service harmonized
  • Network related notifications cleaned up

Device management (MDM)

Events view

  • Weather widget can save open/close state (in events view).

Input and Keyboard

  • Allow configuring which keyboard layouts get into a customer variant.

Notifications

  • Network related notifications cleared up.

SDK

  • Warnings given by SSU when doing registration in SDK improved (when D-Bus is unavailable).

Security

  • Gstreamer vulnerabilities fixed: CVE-2017-5838, CVE-2016-9811, CVE-2017-5837, CVE-2017-5839, CVE-2017-5842, CVE-2017-5844, CVE-2016-10198, CVE-2016-10199, CVE-2017-5840, CVE-2017-5841, CVE-2017-5845, CVE-2016-9809, CVE-2016-9812, CVE-2016-9813, CVE-2017-5843, CVE-2017-5848.
  • Random generated passwords must be type twice before accepting
  • Disabled the services of systemd that are not needed
  • usb-moded made to supervise if something else tries to change USB control files
  • ofono and connman logs have been protected from unauthorized access – they will not serve non-privileged processes
  • Prevent unprivileged processes from toggling flight mode.

Settings

  • Folder creation inside sub-folders fixed

Issues reported by the community at together.jolla.com and fixed in this update

 

 

FULL CHANGELOG

 

Comparing Sailfish OS 2.1.2.3 to 2.1.1.26

Packages removed (2) (toggle all)

  • droid-bin-l500d
  • remotesecurity-l10n

    Packages modified (190) (toggle all)

PackageKit

  • Updated : 0.8.9+91-1.29.2 — 0.8.9+92-1.29.2
  • [compat] Switch to correct systemd linking so the compat lib is no longer needed.
  • [packaging] Submodule and mass patch export for 0.8.9.

    aliendalvik

  • Updated : 1.0.63-1 — 1.0.75-1 (f5121)
  • Fix rotation of the front camera jpeg images.
  • Prevent the android status bar from appearing in every case.
  • Fix an issue with installing apps
  • Add support for f5121
  • Fix an issue with Firefox Beta for Android
  • Monitor headset plug/unplug
  • Add directory scan support in media scanner
  • Notify audio focus change when call state changes
  • Fix build flag after openssl upgrade
  • Accepts all files reported by Tracker
  • Set status bar height to 1px
  • Paint status bar in black
  • Disable the camera recording sound
  • Ignore notification timestamp if it’s 0 or not to be shown
  • Guard mAlienGpsClient access in AlienGpsService.
  • Fix crash in resource manager service
  • Implement standby operation for audio input/output
  • Fix NPE in RemoteKeyboard
  • Notify native platform when Alien finishes bootup
  • Replace dateTaken with lastModified for video item
  • Remove outdated timed-qt5 header path
  • Refactor remote keyboard

    apkd

  • Updated : 0.7.25.1-10.36.2.jolla — 0.7.27-10.35.1.jolla
  • [service] Wait for aliendalvik to be started before trying to install apks.
  • [packaging] Empty commit to fix

    apkd-l10n

  • Updated : 1.57.2-10.30.1.jolla — 1.64-10.30.1.jolla
  • [l10n ] 0 of 40 strings translated (0 need review).
  • [tpl ] translation templates update for 0.7.27
  • [l10n ] 40 of 40 strings translated (0 need review).

    audioflingerglue

  • Updated : 0.0.3-10.4.1.jolla — 0.0.4-10.5.1.jolla
  • [audioflingerglue] Rename hybris.c to hybris.c.in.
  • [audioflingerglue] Update proper lib path during build.
  • [lib64] Allow for 64-bit libaudioflingerglue.
  • [services] Add support for Android 7 based ports. Fixes Mer#1732.
  • [lib64] Allow for 64-bit libaudioflingerglue.

    augeas

  • Updated : 1.0.0-1.2.1 — 1.6.0-1.2.2
  • [packaging] Switch to tar_git format.
  • [update] Upgrade to v1.6.0.

    bluez5

  • Updated : 5.43+git5.1-1.6.2 — 5.45+git1-1.4.2
  • [packaging] enable deprecated.
  • [packaging] version 5.45.
  • [obexd] Limit Transferred DBus signalling.
  • [avrcp] add mpris support for fastforward and rewind.
  • [packaging] disable hostname plugin.

    buteo-sync-plugin-caldav

  • Updated : 0.1.41.1-1.26.1 — 0.1.42-1.25.1
  • [buteo-sync-plugin-caldav] Add a test for date reader and force ical parsing when version is missing, fixes MER#1773.
  • [buteo-sync-plugin-caldav] Add a test for date reader, contributes to MER#1773.
  • [buteo-sync-plugin-caldav] Don’t crash if authentication failed.
  • [buteo-sync-plugin-caldav] Force ical parsing when version is missing, fixes MER#1773.
  • [buteo-sync-plugin-caldav] Handle broken upsync gracefully.
  • [buteo-sync-plugin-caldav] Handle known-orphan occurrences.
  • [buteo-sync-plugin-caldav] XML-sanitise .ics data.

    buteo-sync-plugin-carddav

  • Updated : 0.0.27.1-1.18.2 — 0.0.28-1.17.1
  • [buteo-sync-plugin-carddav] Allow addressbook path as home set url.
  • [buteo-sync-plugin-carddav] Support Kerio addressbook collections. Contributes to MER#1751
  • [buteo-sync-plugin-carddav] Support Kerio redirects. Contributes to MER#1751

    commhistory-daemon-l10n

  • Updated : 1.49-10.31.1.jolla — 1.50-10.32.1.jolla
  • [l10n ] 37 of 37 strings translated (0 need review).

    connectionagent-qt5

  • Updated : 0.11.30.1-1.30.2 — 0.11.33-1.29.1
  • [connectionagent] Align error reporting code paths.
  • [connectionagent] Cleanup ConnectionAgent logging.
  • [connectionagent] Cleanup deadcode.
  • [rpm] Increment version.
  • [connectionagent] Removed (some) unnecessary stuff
  • [connectionagent] Removed unused tetheringStarted field
  • [connectionagent] Set delayedTethering to false when clearing tetheringWifiTech pointer.
  • [connectionagent] Cleanup logging.
  • [connectionagent] Register DBus object/service in correct order.

    connman

  • Updated : 1.31+git23.12-1.47.1 — 1.31+git37.4-1.42.1
  • [connman] wifi: Don’t immediately report INVALID_KEY for auto connects.
  • [connman] Reset service error if user input is cancelled.
  • [connman] VPN issues.
  • [connman] Handle NULL network in request_input_cb.
  • [connman] Expose InputRequestTimeout.
  • [connman] Repaired switching from cellular to wifi.
  • [connman] Avoid unsigned underflow when scheduling IPHB wakeup.
  • [connman] Do not autoconnect more than one service of each type.
  • [connman] Don’t refuse hidden connect when scanning.
  • [connman] Handle any kind of security in previous_passphrase_handler.
  • [connman] Make -d option repeatable
  • [connman] Check service autoconnect flag directly.
  • [connman] Make sure cellular technology is enabled.
  • [connman] Save AutoConnect=false
  • [connman] Allow setting offline mode for now.
  • [connman] Improved autoconnect sync.
  • [connman] Use wake timers in the wifi plugin.
  • [connman] Eliminated unnecessary security warnings
  • [connman] Update autoconnect flags only via service_set_autoconnect.
  • [connman] Fix use after free in device_destruct.
  • [connman] Don’t enable AutoConnect by default.
  • [connman] Fix loading of access policy from the settings file.
  • [connman] Don’t require Favorite for auto-connect.
  • [connman] Access control for net.connman.Manager.
  • [connman] Added net.connman.Manager.CreateService method.
  • [connman] Rolled back unnecessary non-upstreamable patch

    connman-qt5

  • Updated : 1.1.8-1.37.2 — 1.2.3-1.37.1
  • [connman-qt] Emit pathChanged when path changes.
  • [connman-qt] Cleanup NetworkService interface.
  • [connman-qt] Added connecting and lastConnectError service properties.
  • [connman-qt] Pull InputRequestTimeout from D-Bus.
  • [connman-qt] Clean up parameter and return types.
  • [connman-qt] Emit countChanged after out-of-band removal of network service.
  • [connman-qt] Fix dependencies between subprojects.
  • [connman-qt] Removed build directory from the repo

    csd-l10n

  • Updated : 1.44.1-10.25.1.jolla — 1.47-10.25.1.jolla
  • [l10n ] 461 of 467 strings translated (3 need review).
  • [tpl ] translation templates update for 0.9.2
  • [l10n ] 452 of 466 strings translated (0 need review).
  • [tpl ] translation templates update for 0.8.11
  • [tpl ] translation templates update for 0.8.12
  • [tpl ] translation templates update for 0.9.0

    declarative-transferengine-qt5-l10n

  • Updated : 1.55-10.34.1.jolla — 1.57-10.36.1.jolla
  • [l10n ] 22 of 22 strings translated (0 need review).

    droid-config-l500d

  • Updated : 0.10.5.5-10.112.1.jolla — 0.11.1-10.109.5.jolla
  • [droid-configs-device] Upgrade latest upstream version
  • [zypp] Prevent removing main HA packages.
  • [l500d] Enable hfp audio configuration.
  • [l500d] Remove unused twin bthsp device configs.
  • [l500d] Ask user to reboot device after rild restart.
  • [l500d] Remove obsolete voicecall_record config.
  • [l500d] Move camera policy configuration under /usr/share/sailfish-policy.
  • [l500d] Load different stream-restore configs for bluez.
  • [sensors] Tune orientation threshold values.

    droid-config-p4903

  • Updated : 0.1.10.20-10.15.2.jolla — 0.3.3-10.5.7.jolla
  • [droid-configs-device] Upgrade latest upstream version
  • [p4903] Disable adb in diag usb mode.
  • [p4903] Relax accelerometer csd values.
  • [zypp] Prevent removing main HA packages.
  • [p4903] Add sensor-calibration-p4903 package to pattern
  • [p4903] Add mainvolume config for usbaudio mode.
  • [p4903] Add usbaudio configuration.
  • [p4903] Enable hfp audio configuration.
  • [p4903] Remove unused bthsp twin device configs.
  • [csd] Match accelerometer requirement with ODM’s standard.
  • [sensors] Change orientation thresholds.
  • [sensors] Drop gyroscope config.
  • [p4903] Add droid qtfeedback configs.
  • [p4903] Start adbd in diag usb mode.
  • [p4903] Provide root readable screen configurations.
  • [p4903] Add lipstick dconf configurations.
  • [mce] Add P4903 specific input policy configuration.
  • [p4903] Enable lipstick touch filter.
  • [p4903] Include xtt files to image.
  • [p4903] Add QPA_EGLFS_PHYSICAL_WIDTH and HEIGHT.
  • [p4903] Do not disable bluetooth FTP profile.
  • [flashing] There is only one provider of tools.
  • [p4903] Add english factory setup also for ru-cert ks.
  • [p4903] Add ks extra name option to pass english factory setup.
  • [dsme] Add abootsettings ini file for passport.
  • [p4903] Remove obsolete voicecall_record config.
  • [image] Add Exchange support by default.
  • [csd] Add factory-tests.ini file.
  • [csd] Add test blacklist file.
  • [usb-moded] Remove adb function from diag mode
  • [usb-moded] Remove adb support services.
  • [camera] Set correct megapixel values for the resolutionText values.
  • [p4903] Add camera policy configuration under /usr/share/sailfish-policy.
  • [p4903] Updated bluetooth volume steps from upstream.

    droid-config-tbj

  • Updated : 0.7.3-10.20.36.jolla — 0.7.4-10.20.3.jolla
  • [policy] Rename usb source device to usbmic.

    droidmedia

  • Updated : 0.20170404.0-10.12.1.jolla — 0.20170510.2-10.13.1.jolla
  • [droidmedia] Fix path to device mk files.
  • [droidmedia] 32bit builds for qualcomm cameras on 64bit boards.

    dsme

  • Updated : 0.76.1.1-1.5.2 — 0.78.1-1.4.2
  • [build] Update header dependencies
  • [modulebase] Allow passing NULL to module_name()
  • [modulebase] Remove unused leave_module() function
  • [modules] Use correct module context in callbacks not dispatched by DSME
  • [timers] Add dsme_create_timer() for ms resolution timeouts
  • [timers] Dispatch timers in correct module context.
  • [timers] Remove unused dsme_create_timer_high_priority() function
  • [timers] Rename dsme_create_timer() to dsme_create_timer_seconds()
  • [timers] Use Use dsme timer api instead of the glib one.
  • [dsme] Drop option to build dsme without logging
  • [dsme] Fix dsme-wdd and dsme-server command line parsing
  • [logging] Add runtime logging include/exclude control.
  • [logging] Allow fine tuned diagnostic logging.
  • [logging] Drop log-to-stdout feature
  • [logging] Drop log-to-sti feature
  • [packaging] Adjust libsystemd build requirements.
  • [iphb] Reduce journal spam during bootup.
  • [dsme] Add support for android 6 device info.
  • [abootsettings] Do not complain about missing ini-file.
  • [actdead] Do not indicate shutdown when booting to act dead.

    e2fsprogs

  • Updated : 1.43.1-1.4.1 — 1.43.1+git1-1.4.2
  • [e2fsprogs] Remove the m_hugefile test as it fails to build on tmpfs workers. Fixes MER#1675

    eventsview-extensions

  • Updated : 0.0.30-10.11.1.jolla — 0.0.32-10.12.1.jolla
  • [eventsview-extensions] Update to new dbus import.
  • [jolla-eventsview-extensions] Move to Nemo.Connectivity import.

    feature-omp-ru-cert

  • Updated : 0.0.2.1-10.4.4.jolla — 0.0.3-10.4.1.jolla Unmet requirements: jolla-keyboard-layout-russian
  • [rpm] Include russian and tatar keyboard layouts.

    fingerterm

  • Updated : 1.3.4-1.19.1 — 1.3.6-1.19.1
  • [fingerterm] content no longer in resources and layouts not automatically copied.
  • [fingerterm] Don’t copy anymore layouts to user config directory on startup.
  • [fingerterm] Install QML files, icons and data under /usr/share/fingerterm instead of using resources.
  • [fingerterm] Add a minimal delay between key press and release.
  • [fingerterm] Use minimum press feedback time.

    geoclue-provider-hybris

  • Updated : 0.2.12-10.28.2.jolla — 0.2.13-10.28.1.jolla
  • [geoclue-provider-hybris] Fix building for Android 7.

    geoclue-provider-mlsdb

  • Updated : 0.0.13-1.5.1 — 0.0.14-1.5.1
  • [geoclue-mlsdb] Suppress debug output to journal by default.
  • [geoclue-provider-mlsdb] Add bounding-box information for European countries. Contributes to MER#1559
  • [mlsdbtool] add Africa
  • [mlsdbtool] Add bounding boxes for Africa. Contributes to MER#1559
  • [mlsdbtool] add Bounding Boxes for Europe:
  • [mlsdbtool] add Bounding Box for Aland Islands
  • [mlsdbtool] add Bounding Box for Albania
  • [mlsdbtool] add Bounding Box for Algeria
  • [mlsdbtool] add Bounding Box for Andorra
  • [mlsdbtool] add Bounding Box for Angola
  • [mlsdbtool] add Bounding Box for Armenia
  • [mlsdbtool] add Bounding Box for Austria
  • [mlsdbtool] add Bounding Box for Azerbaijan
  • [mlsdbtool] add Bounding Box for Belarus
  • [mlsdbtool] add Bounding Box for Belgium
  • [mlsdbtool] add Bounding Box for Benin
  • [mlsdbtool] add Bounding Box for Bosnia and Herz.
  • [mlsdbtool] add Bounding Box for Botswana
  • [mlsdbtool] add Bounding Box for Bulgaria
  • [mlsdbtool] add Bounding Box for Burkina Faso
  • [mlsdbtool] add Bounding Box for Burundi
  • [mlsdbtool] add Bounding Box for Cameroon
  • [mlsdbtool] add Bounding Box for Canary Islands
  • [mlsdbtool] add Bounding Box for Cape Verde
  • [mlsdbtool] add Bounding Box for Central African Republic
  • [mlsdbtool] add Bounding Box for Ceuta
  • [mlsdbtool] add Bounding Box for Chad
  • [mlsdbtool] add Bounding Box for Comoros
  • [mlsdbtool] add Bounding Box for Congo
  • [mlsdbtool] add Bounding Box for Croatia
  • [mlsdbtool] add Bounding Box for Cyprus
  • [mlsdbtool] add Bounding Box for Czech Republic
  • [mlsdbtool] add Bounding Box for Democratic Republic of the Congo
  • [mlsdbtool] add Bounding Box for Denmark
  • [mlsdbtool] add Bounding Box for Djibouti
  • [mlsdbtool] add Bounding Box for Egypt
  • [mlsdbtool] add Bounding Box for Equatorial Guinea
  • [mlsdbtool] add Bounding Box for Eritrea
  • [mlsdbtool] add Bounding Box for Estonia
  • [mlsdbtool] add Bounding Box for Ethiopia
  • [mlsdbtool] add Bounding Box for Faroe Islands
  • [mlsdbtool] add Bounding Box for France
  • [mlsdbtool] add Bounding Box for Gabon
  • [mlsdbtool] add Bounding Box for Gambia
  • [mlsdbtool] add Bounding Box for Georgia
  • [mlsdbtool] add Bounding Box for Germany
  • [mlsdbtool] add Bounding Box for Ghana
  • [mlsdbtool] add Bounding Box for Gibraltar
  • [mlsdbtool] add Bounding Box for Greece
  • [mlsdbtool] add Bounding Box for Guernsey
  • [mlsdbtool] add Bounding Box for Guinea
  • [mlsdbtool] add Bounding Box for Guinea Bissau
  • [mlsdbtool] add Bounding Box for Hungary
  • [mlsdbtool] add Bounding Box for Iceland
  • [mlsdbtool] add Bounding Box for Ireland
  • [mlsdbtool] add Bounding Box for Isle of Man
  • [mlsdbtool] add Bounding Box for Italy
  • [mlsdbtool] add Bounding Box for Ivory Coast
  • [mlsdbtool] add Bounding Box for Jersey
  • [mlsdbtool] add Bounding Box for Kazakhstan
  • [mlsdbtool] add Bounding Box for Kenya
  • [mlsdbtool] add Bounding Box for Kosovo
  • [mlsdbtool] add Bounding Box for Latvia
  • [mlsdbtool] add Bounding Box for Lesotho
  • [mlsdbtool] add Bounding Box for Liberia
  • [mlsdbtool] add Bounding Box for Libya
  • [mlsdbtool] add Bounding Box for Liechtenstein
  • [mlsdbtool] add Bounding Box for Lithuania
  • [mlsdbtool] add Bounding Box for Luxembourg
  • [mlsdbtool] add Bounding Box for Macedonia
  • [mlsdbtool] add Bounding Box for Madagascar
  • [mlsdbtool] add Bounding Box for Madeira
  • [mlsdbtool] add Bounding Box for Malawi
  • [mlsdbtool] add Bounding Box for Mali
  • [mlsdbtool] add Bounding Box for Malta
  • [mlsdbtool] add Bounding Box for Mauritania
  • [mlsdbtool] add Bounding Box for Mauritius
  • [mlsdbtool] add Bounding Box for Mayotte
  • [mlsdbtool] add Bounding Box for Melilla
  • [mlsdbtool] add Bounding Box for Moldava
  • [mlsdbtool] add Bounding Box for Monaco
  • [mlsdbtool] add Bounding Box for Montenegro
  • [mlsdbtool] add Bounding Box for Morocco
  • [mlsdbtool] add Bounding Box for Mozambique
  • [mlsdbtool] add Bounding Box for Namibia
  • [mlsdbtool] add Bounding Box for Netherlands
  • [mlsdbtool] add Bounding Box for Niger
  • [mlsdbtool] add Bounding Box for Nigeria
  • [mlsdbtool] add Bounding Box for Norway
  • [mlsdbtool] add Bounding Box for Poland
  • [mlsdbtool] add Bounding Box for Portugal
  • [mlsdbtool] add Bounding Box for Reunion
  • [mlsdbtool] add Bounding Box for Romania
  • [mlsdbtool] add Bounding Box for Rwanda
  • [mlsdbtool] add Bounding Box for San Marino
  • [mlsdbtool] add Bounding Box for Sao Tome and Principe
  • [mlsdbtool] add Bounding Box for Senegal
  • [mlsdbtool] add Bounding Box for Serbia
  • [mlsdbtool] add Bounding Box for Seychelles
  • [mlsdbtool] add Bounding Box for Sierra Leone
  • [mlsdbtool] add Bounding Box for Slovakia
  • [mlsdbtool] add Bounding Box for Slovenia
  • [mlsdbtool] add Bounding Box for Somalia
  • [mlsdbtool] add Bounding Box for South Africa
  • [mlsdbtool] add Bounding Box for South Sudan
  • [mlsdbtool] add Bounding Box for Spain
  • [mlsdbtool] add Bounding Box for Sudan
  • [mlsdbtool] add Bounding Box for Swaziland
  • [mlsdbtool] add Bounding Box for Sweden
  • [mlsdbtool] add Bounding Box for Switzerland
  • [mlsdbtool] add Bounding Box for Tanzania
  • [mlsdbtool] add Bounding Box for Togo
  • [mlsdbtool] add Bounding Box for Tunisia
  • [mlsdbtool] add Bounding Box for Turkey
  • [mlsdbtool] add Bounding Box for Uganda
  • [mlsdbtool] add Bounding Box for Ukraine
  • [mlsdbtool] add Bounding Box for United Kingdom
  • [mlsdbtool] add Bounding Box for Zambia
  • [mlsdbtool] add Bounding Box for Zimbabwe
  • [mlsdbtool] add missing ;
  • [mlsdbtool] add missing ; for Bounding Box Sudan
  • [mlsdbtool] fix Bounding Box Burundi
  • [mlsdbtool] fix Bounding Box for Libya
  • [mlsdbtool] fixing space issue in Bounding Box Bosnia and Herzegovina
  • [mlsdbtool] fix typo in Bounding Box Moldova
  • [mlsdbtool] moved Bounding Box for Finland
  • [mlsdbtool] moved Bounding Box of Kazakhstan
  • [mlsdbtool] removed doubled Bounding Box of Italy
  • [mlsdbtool] remove unneeded spaces

    gstreamer1.0

  • Updated : 1.10.2+git1-1.8.1 — 1.10.4-1.8.1
  • [security] Update Gstreamer to 1.10.4. Contributes MER#1779

    gstreamer1.0-droid

  • Updated : 0.20170213.0-10.16.1.jolla — 0.20170510.0-10.16.1.jolla
  • [codec] Enable VP8. Fixes MER#595.
  • [droidcamsrc] Use preview size values if video size values are missing. Contributes MER#1782

    gstreamer1.0-plugins-bad

  • Updated : 1.10.2-1.12.1 — 1.10.4-1.13.1
  • [security] Update Gstreamer to 1.10.4. Contributes MER#1779

    gstreamer1.0-plugins-base

  • Updated : 1.10.2+git2-1.7.2 — 1.10.4+git1-1.6.1
  • [gst-plugins-base] Fix appsrc based pipelines reporting the wrong duration.
  • [security] Update Gstreamer to 1.10.4. Contributes MER#1779

    gstreamer1.0-plugins-good

  • Updated : 1.10.2-1.7.1 — 1.10.4-1.8.1
  • [security] Update Gstreamer to 1.10.4. Contributes MER#1779

    hybris-libsensorfw-qt5

  • Updated : 0.9.0-10.26.1.jolla — 0.9.2.1-10.29.1.jolla
  • [hybris-adaptors] Select 1st sensor variant for each sensor type.
  • [hybris-adaptors] Use wakelock to ensure proximity data io.
  • [sensord] Use systemd notify instead of forking a daemon.
  • [sensord] Do not log successful daemon forks.
  • [systemd] Drop BusName from sensorfwd.service.

    jolla-calendar

  • Updated : 0.6.18.6-10.51.2.jolla — 0.6.28-10.47.1.jolla Binaries added : sailfish-components-calendar-qt5 – 0.6.28-10.47.1.jolla Unmet requirements: sailfish-components-calendar-qt5 = 0.6.28
  • [jolla-calendar] Expose simplified event view page in Sailfish.Calendar import.
  • [spec] Use _smp_mflags instead of jobs macro.
  • [calendar] Avoid temporary height decrease when expanding calendar widget.
  • [jolla-calendar] Fix date clicking breaking with Sydney timezone.
  • [jolla-calendar] Update events view date labels sizes on font size change.
  • [jolla-calendar] Fix clicking on event item.
  • [jolla-calendar] Update events view model at least daily.
  • [jolla-calendar] Use native types on lighweight model.
  • [jolla-calendar] Update date widths always when model changes.
  • [jolla-calendar] Don’t reserve space for non-existent events.
  • [jolla-calendar] Remove CalendarWidget dependency on Lipstick.
  • [jolla-calendar] Allow future dated events in calendar widget.
  • [jolla-calendar] Improve calendar event display in events view.

    jolla-calendar-l10n

  • Updated : 1.98-10.30.1.jolla — 1.107-10.33.1.jolla
  • [l10n ] 80 of 80 strings translated (0 need review).
  • [l10n ] New files added from Jolla localization based on templates
  • [tpl ] translation templates update for 0.6.28
  • [l10n ] 77 of 77 strings translated (0 need review).
  • [tpl ] translation templates update for 0.6.27
  • [l10n ] 77 of 77 strings translated (0 need review).
  • [tpl ] translation templates update for 0.6.19
  • [tpl ] translation templates update for 0.6.22
  • [tpl ] translation templates update for 0.6.23
  • [tpl ] translation templates update for 0.6.24
  • [tpl ] translation templates update for 0.6.25
  • [tpl ] translation templates update for 0.6.26

    jolla-camera

  • Updated : 0.4.9.6-10.69.2.jolla — 0.4.22-10.63.1.jolla
  • [camera] Implement support for generic resolution text.
  • [jolla-camera] Hide controls while capturing video.
  • [jolla-camera] Match shutter background size to icon.
  • [camera] Make focus locked on tap to focus.
  • [jolla-camera] Do not explicitly close existing notification.
  • [jolla-camera] Select one way mode switch gesture direction.
  • [jolla-camera] Reset ISO value together with overlay reset button.
  • [camera] Change tap focus lock time from 10s to 5s.
  • [jolla-camera] Use camera device button at the same edge as shutter if possible.
  • [camera] Fix white balance and exposure labels getting clipped.
  • [camera] Fix white balance label going outside the screen.
  • [camera] Use Qt.AlignLeft/Right instead of Text.AlignLeft/Right
  • [camera] Add 16:9 resolution 8 megapixel translation. Contributes
  • [camera] Add 16:9 resolution 8 megapixel translation.
  • [jolla-camera] Fix (again) camera changing broken on d-bus request.
  • [jolla-camera] Initialise PositionSource.active in a safe manner.
  • [mdm] Disable Camera settings if Camera is not allowed.

    jolla-camera-l10n

  • Updated : 1.115.2-10.56.1.jolla — 1.126-10.56.1.jolla
  • [l10n ] 53 of 54 strings translated (0 need review).
  • [tpl ] translation templates update for 0.4.20
  • [tpl ] translation templates update for 0.4.21
  • [tpl ] translation templates update for 0.4.22
  • [l10n ] 66 of 66 strings translated (0 need review).
  • [tpl ] translation templates update for 0.4.17
  • [tpl ] translation templates update for 0.4.18
  • [tpl ] translation templates update for 0.4.19
  • [l10n ] 66 of 66 strings translated (0 need review).
  • [tpl ] translation templates update for 0.4.11
  • [tpl ] translation templates update for 0.4.12
  • [tpl ] translation templates update for 0.4.13
  • [tpl ] translation templates update for 0.4.15

    jolla-clock-l10n

  • Updated : 1.79-10.3.1.jolla — 1.83-10.6.1.jolla
  • [l10n ] 37 of 38 strings translated (0 need review).

    jolla-contacts

  • Updated : 0.5.11-10.64.1.jolla — 0.5.12-10.64.2.jolla
  • [jolla-contacts] Use newer DBus module.

    jolla-contacts-l10n

  • Updated : 1.111.1-10.61.1.jolla — 1.116-10.62.1.jolla
  • [l10n ] 152 of 154 strings translated (0 need review).
  • [tpl ] translation templates update for 0.5.12
  • [l10n ] 166 of 168 strings translated (0 need review).

    jolla-devicelock

  • Updated : 0.2.4.6-10.37.1.jolla — 0.2.12.1-10.33.1.jolla Unmet requirements: libnemodbus.so.2
  • [devicelock] Fix an error where a security code be set when changing a config value.
  • [devicelock] Reset unlock attempt counter on upgrade.
  • [sailfish-mdm] Enforce device reset policy.
  • [devicelock] Write a marker file if external storage should be wiped on device reset.
  • [devicelock] Ensure settings required for validation are initialized first.
  • [devicelock] Use term security code instead of lock code.
  • [devicelock] Add an option for device management to irreversibly lock a device.
  • [devicelock] Emit feedback when a security code is due to expire soon.
  • [devicelock] Enable code generation configuration options.
  • [devicelock] Fix authentication error when entering an incorrect code.
  • [devicelock] Fixup default show notifications value.
  • [devicelock] Don’t report the number of failed attempts if no maximum is set.

    jolla-devicelock-l10n

  • Updated : 1.27-10.19.1.jolla — 1.30-10.21.1.jolla
  • [l10n ] 7 of 7 strings translated (0 need review).

    jolla-email

  • Updated : 0.3.23-10.75.1.jolla — 0.3.25-10.75.1.jolla Unmet requirements: sailfish-components-calendar-qt5
  • [jolla-email] Allow showing synced invitation events.
  • [jolla-email] Move to Nemo.Connectivity import.

    jolla-email-l10n

  • Updated : 1.130.1-10.44.1.jolla — 1.136-10.45.1.jolla
  • [l10n ] 148 of 149 strings translated (1 need review).
  • [tpl ] translation templates update for 0.3.25
  • [l10n ] 148 of 149 strings translated (1 need review).
  • Updated : 1.69-10.41.1.jolla — 1.72-10.44.1.jolla
  • [l10n ] 35 of 35 strings translated (0 need review).
  • Updated : 0.0.9-10.3.3.jolla — 0.0.10.1-10.6.1.jolla
  • [jolla-gallery-extensions] Migrate to Dropbox V2 API.
  • [jolla-gallery-extensions] Move to Nemo.Connectivity import.
  • Updated : 1.13-10.7.1.jolla — 1.14-10.8.1.jolla
  • [l10n ] 10 of 10 strings translated (0 need review).
  • Updated : 1.94-10.49.1.jolla — 1.97-10.52.1.jolla
  • [l10n ] 18 of 18 strings translated (0 need review).
  • [tpl ] translation templates update for 0.2.8

    jolla-keyboard

  • Updated : 0.6.10-10.61.1.jolla — 0.6.11-10.60.1.jolla Binaries added : jolla-keyboard-layout-kazakh – 0.6.11-10.60.1.jolla, jolla-keyboard-layout-indian – 0.6.11-10.60.1.jolla, jolla-keyboard-layout-russian – 0.6.11-10.60.1.jolla, jolla-keyboard-layout-chinese – 0.6.11-10.60.1.jolla, jolla-keyboard-layout-all – 0.6.11-10.60.1.jolla, jolla-keyboard-layout-western – 0.6.11-10.60.1.jolla
  • [jolla-keyboard] Split layouts into smaller subpackages.

    jolla-keyboard-l10n

  • Updated : 1.33-10.24.1.jolla — 1.35-10.26.1.jolla
  • [l10n ] 15 of 15 strings translated (0 need review).

    jolla-mediaplayer

  • Updated : 0.3.20-10.45.2.jolla — 0.3.21-10.44.1.jolla
  • [mediaplayer] add bluez5 support for fastforward and rewind.

    jolla-mediaplayer-l10n

  • Updated : 1.72-10.24.1.jolla — 1.76-10.27.1.jolla
  • [l10n ] 64 of 64 strings translated (0 need review).
  • [tpl ] translation templates update for 0.3.21
  • [l10n ] 64 of 64 strings translated (0 need review).
  • [tpl ] translation templates update for 0.3.20

    jolla-messages

  • Updated : 0.6.58-10.74.1.jolla — 0.6.59.1-10.76.1.jolla
  • [messages] Restore visiblity of previous messages when returning to a draft.
  • [jolla-messages] Fix messages outbound SMS and IM error state.

    jolla-messages-l10n

  • Updated : 1.116-10.62.1.jolla — 1.120-10.65.1.jolla
  • [l10n ] 92 of 92 strings translated (0 need review).
  • [tpl ] translation templates update for 0.6.59
  • [l10n ] 92 of 92 strings translated (0 need review).

    jolla-notes

  • Updated : 0.9.5.1-10.33.1.jolla — 0.9.6-10.32.1.jolla
  • [notes] Try and detect the character encoding of text files.

    jolla-notes-l10n

  • Updated : 1.56-10.22.1.jolla — 1.60-10.25.1.jolla
  • [l10n ] 18 of 18 strings translated (0 need review).
  • [tpl ] translation templates update for 0.9.6
  • [l10n ] 18 of 18 strings translated (0 need review).

    jolla-sessions-qt5

  • Updated : 1.1.5.2-10.39.1.jolla — 1.1.8-10.36.2.jolla
  • [conf] Format QtInfoMsg messages.
  • [user-session] Expect ‚inactive‘ when starting user-session.
  • [pam] Do common system-auth tasks before autologin specific ones.

    jolla-settings-accounts

  • Updated : 0.3.14.1-10.90.1.jolla — 0.3.17.1-10.91.1.jolla
  • [jolla-settings-accounts-extensions] Update Dropbox provider.
  • [settings-accounts] Adapt to newer dbus module import.
  • [jolla-settings-accounts] Remove Google Talk (GChat) service.
  • [jolla-settings-accounts] Move to Nemo.Connectivity import.

    jolla-settings-accounts-l10n

  • Updated : 1.155.1-10.75.1.jolla — 1.160-10.76.1.jolla
  • [l10n ] 335 of 335 strings translated (0 need review).
  • [tpl ] translation templates update for 0.3.14

    jolla-settings-bluetooth-l10n

  • Updated : 1.70.1-10.38.1.jolla — 1.72-10.38.1.jolla
  • [l10n ] 13 of 13 strings translated (0 need review).

    jolla-settings-l10n

  • Updated : 1.56-10.39.1.jolla — 1.57-10.40.1.jolla
  • [l10n ] 0 of 9 strings translated (0 need review).

    jolla-settings-networking

  • Updated : 0.3.76.7-10.90.1.jolla — 0.4.7.1-10.85.1.jolla
  • [jolla-settings-networking] Open Connection Selector when dimmed mobile data switch is tapped.
  • [jolla-settings-networking] Enforce tethering policy.
  • [jolla-settings-networking] Remove invalid code lines.
  • [jolla-settings-networking] Avoid compiling EditMobileNetworkPage until it is opened.
  • [jolla-settings-networking] Cleanup mobile data mainpage.
  • [jolla-settings-networking] Use DataConnection component for activate mobile data.
  • [rpm] Increment version and requirements.
  • [jolla-settings-networking] Guard Internet sharing with mobile data autoConnect.
  • [jolla-settings-network] Write Chap in uppercase CHAP.
  • [jolla-settings-network] Add authentication method selector to network edit pages.
  • [jolla-settings-networking] Do not enable Internet sharing without mobile data.
  • [multisim] Disable voice sim selection combobox when no sims inserted.
  • [jolla-settings-networking] Repaired another mobile data switch.
  • [jolla-settings-networking] Repaired the mobile data switch on single sim phones.
  • [jolla-settings-networking] Fix first time mobile data connection.
  • [jolla-settings-networking] Clean up project config.
  • [wlan] Fix wlan policy value getting inverted.
  • [wlan] Align policy naming.
  • [mobilenetwork] Added new string for the „unregistered“ status.

    jolla-settings-networking-l10n

  • Updated : 1.170.2-10.69.1.jolla — 1.185-10.69.1.jolla
  • [l10n ] 374 of 374 strings translated (0 need review).
  • [tpl ] translation templates update for 0.4.7
  • [l10n ] 371 of 374 strings translated (0 need review).
  • [tpl ] translation templates update for 0.4.6
  • [l10n ] 371 of 374 strings translated (0 need review).
  • [tpl ] translation templates update for 0.4.1
  • [tpl ] translation templates update for 0.4.2
  • [tpl ] translation templates update for 0.4.3
  • [tpl ] translation templates update for 0.4.5
  • [l10n ] 299 of 367 strings translated (1 need review).
  • [tpl ] translation templates update for 0.3.76
  • [tpl ] translation templates update for 0.3.77
  • [tpl ] translation templates update for 0.3.80
  • [tpl ] translation templates update for 0.3.81

    jolla-settings-sailfishos-l10n

  • Updated : 1.55-10.31.1.jolla — 1.62-10.34.1.jolla
  • [l10n ] 49 of 49 strings translated (0 need review).
  • [tpl ] translation templates update for 0.1.8
  • [tpl ] translation templates update for 0.1.9
  • [l10n ] 48 of 48 strings translated (0 need review).

    jolla-settings-sync-l10n

  • Updated : 1.41-10.27.1.jolla — 1.42-10.28.1.jolla
  • [l10n ] 23 of 23 strings translated (0 need review).

    jolla-settings-system

  • Updated : 0.11.46.12-10.98.3.jolla — 0.11.66.1-10.90.2.jolla
  • [jolla-settings-system] Pass Ofono SimManager to the Pin input page when changing sim pin.
  • [devicelock] Cancel a security code change if settings loses focus.
  • [jolla-settings-system] Cancel a security code change if settings loses focus.
  • [developermode] Add dummy developer mode setting for easier debugging
  • [developermode] Polish developer mode transitions.
  • [sailfish-mdm] Indicate when device reset is disabled by mdm.
  • [jolla-settings-system] Optimize system settings page loading times.
  • [jolla-settings-system] Tune PIN input layout on larger displays.
  • [settings-system] Show IMEI ID (software version) on About Settings page.
  • [settings-system] Show IMEI software version on About Settings page.
  • [settings-system] Avoid error when swiping settings to background with device lock page.
  • [settings-system] Make DeviceLockQuery mostly responsible for pagestack.
  • [devicelock] Use term security code instead of lock code.
  • [devicelock] Fix suggested code not showing on first prompt.
  • [devicelock] Show security code suggestions if provided.
  • [jolla-settings] Don’t ask for lock code if there was no change.
  • [devicelock] Don’t persist the lock code last chance red highlight.
  • [settings-system] Exit GPS flight mode whenever gps gets somehow enabled.
  • [about] Split license text to two files.
  • [simpin query] Check if puk requested first time.
  • [jolla-settings-system] Align policy naming.
  • [jolla-settings-system] Increase libsailfishpolicy version requirement.
  • [developermode] Update IP address label when developer mode page is re-opened.
  • [devicelock] Show the number of failed attempts.
  • [mdm] Fix MDM disclaimer fade in.
  • [storage] Don’t show the ‚New Folder‘ option for unmounted partitions.

    jolla-settings-system-l10n

  • Updated : 1.228.5-10.87.1.jolla — 1.243-10.86.1.jolla
  • [l10n ] 461 of 461 strings translated (0 need review).
  • [tpl ] translation templates update for 0.11.66
  • [l10n ] 429 of 461 strings translated (6 need review).
  • [tpl ] translation templates update for 0.11.65
  • [l10n ] 461 of 461 strings translated (0 need review).
  • [tpl ] translation templates update for 0.11.62
  • [tpl ] translation templates update for 0.11.63
  • [tpl ] translation templates update for 0.11.64
  • [l10n ] 440 of 461 strings translated (8 need review).
  • [tpl ] translation templates update for 0.11.59
  • [tpl ] translation templates update for 0.11.60
  • [tpl ] translation templates update for 0.11.61
  • [l10n ] 460 of 460 strings translated (0 need review).
  • [tpl ] translation templates update for 0.11.53
  • [tpl ] translation templates update for 0.11.54
  • [tpl ] translation templates update for 0.11.55
  • [tpl ] translation templates update for 0.11.57

    jolla-startupwizard-l10n

  • Updated : 1.120.2-10.61.1.jolla — 1.128-10.61.1.jolla
  • [l10n ] 43 of 43 strings translated (0 need review).
  • [tpl ] translation templates update for 0.3.30

    jolla-vault

  • Updated : 0.4.59-10.47.1.jolla — 0.4.61-10.47.1.jolla
  • [jolla-vault] Avoid compiling NewBackupRestoreDialog until needed.
  • [jolla-vault] Adapt to newer dbus module version.

    jolla-vault-l10n

  • Updated : 1.92.2-10.47.1.jolla — 1.98-10.47.1.jolla
  • [tpl ] translation templates update for 0.4.61
  • [l10n ] 85 of 85 strings translated (0 need review).

    kf5bluezqt-bluez4

  • Updated : 5.24.0+git12-1.4.1 — 5.24.0+git13-1.5.1
  • [bluez-qt] Fix crash after unloading the obex manager.

    kf5bluezqt-bluez5

  • Updated : 5.24.0+git12-1.4.1 — 5.24.0+git13-1.5.1
  • [bluez-qt] Fix crash after unloading the obex manager.

    libaccounts-qt5

  • Updated : 1.13-1.7.1 — 1.13+git1-1.7.2
  • [libaccounts-qt] Retarget upstream repo url. Contributes to MER#908

    libav

  • Updated : 11.8+git2-1.9.6 — 11.8+git3-1.10.1
  • [codec] Enable VP8 decoding for thumbnailing purposes. Contributes MER#595.

    libcontacts-qt5-l10n

  • Updated : 1.7-1.4.1 — 1.8-1.5.1
  • [l10n ] 0 of 3 strings translated (0 need review).

    libglibutil

  • Updated : 1.0.22-1.15.1 — 1.0.24-1.14.1
  • [glibutil] Added gutil_strv_strip function
  • [glibutil] MER#1437
  • [glibutil] Added a few more GUtilIntArray functions
  • [glibutil] MER#1437
  • [glibutil] Refresh symbolic link on every build

    libgofonoext

  • Updated : 1.0.8-1.2.1 — 1.0.9-1.2.1
  • [debian] Changed source format
  • [gofonoext] Do not query D-Bus properties from ofono. MER#1785
  • [gofonoext] MER#1448

    libgrilio

  • Updated : 1.0.11-1.7.1 — 1.0.16-1.7.1
  • [libgrilio] Added grilio_channel_drop_request.
  • [libgrilio] Added more information to the debug log
  • [libgrilio] Added „owner changed“ and „pending“ signals.
  • [libgrilio] Submit blocking request only when nothing is pending.
  • [libgrilio] Added serialized mode.
  • [libgrilio] Added transaction mode.
  • [libgrilio] Allow individual blocking requests.
  • [libgrilio] Log request ids in hex
  • [libgrilio] Added grilio_request_set_retry_func.
  • [libgrilio] MER#1438
  • [libgrilio] Added grilio_request_array_xxx_new functions
  • [libgrilio] Added test for invalid UTF-8
  • [libgrilio] Fixed handling of invalid UTF-8
  • [libgrilio] Improved GRilIoQueue test coverage
  • [libgrilio] MER#1438
  • [libgrilio] Handle couple of rare corner cases
  • [libgrilio] Mark completed requests as DONE
  • [libgrilio] MER#1438
  • [libgrilio] Removed ril-test
  • [libgrilio] Switched tests to g_test framework

    libgsupplicant

  • Updated : 1.0.5-1.2.1 — 1.0.6-1.2.1
  • [gsupplicant] Include <gio gio.h=““> only when it’s necessary. </gio>

    libhybris

  • Updated : 0.0.5.18.1-10.2.1.jolla — 0.0.5.18.5-10.1.1.jolla Binaries added : libhybris-detritus-devel – 0.0.5.18.5-10.1.1.jolla, libhybris-detritus – 0.0.5.18.5-10.1.1.jolla Unmet requirements: libcamera.so.1, libsf.so.1, libwifi.so.1, libis.so.1, libmedia.so.1
  • [hybris] hook alloc/free methods and add a quirk for adreno blobs. MER#1759
  • [packaging] update back to upstream version
  • [packaging] Update .spec as per upstream (WIP)
  • [hybris] Build with a fix for browser crashing on 64bit hw. MER#1759

    libid3tag

  • Updated : 0.15.1b-1.1.5 — 0.15.1b-1.2.1
  • [packaging] add missing patch. Contributes to MER#1453
  • [packaging] add rpm folder to use tar_git. Contributes to MER#1453
  • [packaging] Change inline pkgconfig entry to fix build
  • [mer] Convert libid3tag to tar_git. Contributes to MER#1453

    libkeepalive

  • Updated : 1.4.0-1.12.1 — 1.5.0-1.12.1
  • [keepalive] Move to Nemo.KeepAlive import.

    libngf-qt5

  • Updated : 0.4.0-1.8.1 — 0.5.0-1.8.1
  • [libngf-qt] Move to Nemo.Ngf import.

    libqapk

  • Updated : 0.4.6-10.9.1.jolla — 0.4.7-10.9.1.jolla
  • [qapk] Don’t assume the names of the parent nodes of intent-filter.

    libqofono-qt5

  • Updated : 0.91-1.35.1 — 0.92-1.35.1
  • [libqofono] Expose softwareVersionNumber in QOfonoModem.
  • [libqofono] Replaced hardcoded literals in QOfonoModem with QString constants
  • [libqofono] Updated MCC list. MER#486

    libqofonoext

  • Updated : 1.0.18-1.14.1 — 1.0.19-1.14.1
  • [libqofonoext] Support for ModemManager interface version 8.

    libsignon-glib

  • Updated : 1.7git174.1ef44b5-1.1.7 — 1.7git174.1ef44b5-1.2.1
  • [submodule] Updated to new repository url. Contributes to MER#908

    lipstick-jolla-home-qt5

  • Updated : 0.34.65.17-10.136.2.jolla — 0.36.8-10.126.1.jolla
  • [notification] Show unremovable notification with no action as not interactive.
  • [connectivity] Do not remove network service when connecting.
  • [connectivity] Go to connecting state when connectService called.
  • [lipstick-jolla] Use adjusted setter name for interactiveExpected.
  • [lipstick-jolla-home] Clean up network connection related notifications.
  • [connectivity] When connecting to network, close Connection Selector when connected.
  • [lipstick-jolla-home] Fix reference errors.
  • [lipstick-jolla-home] Switch ConnectionSelector to use DataConnaction component.
  • [lipstick-jolla-home] Tolerate mobile data errors for a while.
  • [lipstick-jolla] Restore weather banner state on restart.
  • [lipstick-jolla-home] Allow flicking to main lock screen when opening device lock view with power key double tap shortcut.
  • [lockscreen] Inform mce when expecting interaction.
  • [lipstick-jolla-home] Don’t publish „Problem with Connection“ notification.
  • [lipstick-jolla-home] Cleanup deadcode from ConnectionSelector.
  • [connectivity] Fix WLAN password fields becoming unfocusable after display off.
  • [lipstick-jolla-home] Don’t use shared instance of NetworkManager.
  • [lipstick-jolla-home] Reset current wifi service item on ListView.onRemove
  • [lipstick-jolla-home] Improve guarding of autoConnect -> requestConnect sequence.
  • [lipstick-jolla-home] Enable mobile data only connection selector.
  • [lipstick-jolla-home] Retry enabling mobile data upon carries lost.
  • [lipstick-jolla] Fix device lock expiration plurals.
  • [devicelock] Update translation text for expiration notifications.
  • [homescreen] Give the correct layer focus after dismissing lockscreen.
  • [lipstick-jolla-home] Re-enable SIM selector touch after leaving Events shortcut housekeeping.
  • [lipstick-jolla-home] Do not explicitly close previous notifications before updating.
  • [lipstick-jolla-home] Restart notification timer.
  • [homescreen] Don’t allow ambience transitions to be interrupted by changing the ambience.
  • [devicelock] Show a notification when the security code is due to expire.
  • [jolla-lipstick] Events view scrollable area to include no notifactions text.
  • [lipstick-jolla-home] Don’t check connman’s state when connecting to unused mobile network.
  • [lipstick-jolla-home] Show sim reboot dialog also with multi sim device.
  • [lipstick-jolla-home] Show sim reboot dialog when present sim count changes.
  • [peekfilter] Calculate progress from absolute progress.
  • [peekfilter] Clear activation threshold when user does a quick swipe.
  • [peekfilter] Reduce peekfilter threshold from 14mm to 10mm.
  • [homescreen] Close cover windows instead of the application windows.
  • [lipstick-jolla-home] Avoid moving above lock screen widgets when hiding the camera icon.
  • [lipstick-jolla-home] Show lockscreen notification icons on unlocked / locked cases.
  • [homescreen] Hide the lockscreen camera when the display turns off.
  • [lipstick-jolla-home] Align policy naming.
  • [lipstick-jolla-home] Increase libsailfishpolicy version requirement.
  • [lipstick-jolla-home] Hide camera quick access hint icon in lower power mode.
  • [lipstick-jolla-home] Centralise events view timeouts.
  • [homescreen] Fix USB dialog blocking connection dialog during startup wizard.

    lipstick-jolla-home-qt5-l10n

  • Updated : 1.190.2-10.74.1.jolla — 1.204-10.74.1.jolla
  • [l10n ] 165 of 165 strings translated (0 need review).
  • [tpl ] translation templates update for 0.36.4
  • [tpl ] translation templates update for 0.36.6
  • [tpl ] translation templates update for 0.36.7
  • [l10n ] 165 of 170 strings translated (0 need review).
  • [tpl ] translation templates update for 0.35.10
  • [tpl ] translation templates update for 0.35.4
  • [tpl ] translation templates update for 0.35.5
  • [tpl ] translation templates update for 0.35.7
  • [tpl ] translation templates update for 0.35.8
  • [tpl ] translation templates update for 0.35.9
  • [tpl ] translation templates update for 0.36.0
  • [tpl ] translation templates update for 0.36.2
  • [tpl ] translation templates update for 0.36.3
  • [l10n ] 171 of 172 strings translated (0 need review).
  • [tpl ] translation templates update for 0.34.78
  • [tpl ] translation templates update for 0.35.0
  • [tpl ] translation templates update for 0.35.2
  • [tpl ] translation templates update for 0.35.3
  • [l10n ] 169 of 169 strings translated (0 need review).
  • [tpl ] translation templates update for 0.34.66
  • [tpl ] translation templates update for 0.34.77

    lipstick-qt5

  • Updated : 0.30.7.5-1.85.7 — 0.32.2-1.84.1
  • [notifications] Restrict access to persistent notifications.
  • [lipstick] Change interactionExpected name as more proper setter.
  • [lipsticksettings] Add interactive lockscreen signaling.
  • [lipstick] Update notification also when replacing an existing notification.
  • [lipstick] Fix launcher folder model app unblacklisting.
  • [lipstick] Fix crash when a surface is destroyed while a key is being held.
  • [lipstick] Allow the volume up and down keys too be pressed simultaneously.
  • [touchscreen] Filter events based on mce input policy signals.
  • [volume] Filter events based on mce input policy signals.
  • [lipstick] Use Systemd’s dbus API for starting and stopping vpn.
  • [notifications] Add x-nemo-suppress-display-on hint.
  • [notifications] Do not cancel display wakeups.
  • [notifications] Suppress display wakeup for usb cable disconnect.

    lipstick-qt5-l10n

  • Updated : 1.55.1-10.34.1.jolla — 1.58-10.35.1.jolla
  • [l10n ] 26 of 26 strings translated (0 need review).

    lzop

  • Updated : 1.03-10.3.6.jolla — 1.03-10.4.1.jolla
  • [license] Unify open source licenses.
  • [packaging] Convert from gitpkg/pristine-tar to tar_git.

    mapplauncherd

  • Updated : 4.1.24-1.17.1 — 4.1.25-1.17.1
  • [mapplauncherd] Remove systemd compat lib dependency.

    mapplauncherd-booster-qtcomponents-qt5

  • Updated : 0.0.5-1.5.1 — 0.0.7-1.5.1
  • [packaging] include LGPLv2.1 license.

    mapplauncherd-privileges-jolla

  • Updated : 0.0.20.1-10.17.1.jolla — 0.0.21-10.16.1.jolla
  • [mapplauncherd-privileges-jolla] Remove ssu and pkcon privileges.

    mce

  • Updated : 1.87.0-1.8.2 — 1.89.0-1.7.1
  • [display] Do not repeatedly warn about scheduler change failures
  • [inactivity] Allow activity when interaction is expected.
  • [inactivity] Do not allow activity while lockscreen is active
  • [inactivity] Skip activity renew instead of switching to inactivity
  • [tklock] Cancel display blanking on lockscreen interaction.
  • [tklock] Do not blank when dismissing alarm with side swipe.
  • [dbus] Drop unused async pid query functionality
  • [dbus] Enablers for limiting dbus methods to privileged clients.
  • [mcetool] Do not silently ignore D-Bus errors from mce.
  • [radiostates] Deny radio control from unprivileged clients.
  • [dbus] Add dbus send helper variant with controllable reply timeout
  • [dbus] Normalize DBusError initialization and cleanup
  • [dbus] Use closable private D-Bus connection
  • [display] Add state machine to deal with compositor ipc. Fixes MER#1771
  • [mce] Add valgrind mode to ease memory leak debugging
  • [mce] Use sigaction() for registering signal handlers.
  • [dsme] Avoid recursion during dsmesock disconnecting.
  • [dbus] Track devicelock service availability.
  • [powerkey] Skip device lock requests while the service is not up.
  • [tklock] Handle devicelock availability changes.

    mer-qdoc-template

  • Updated : 0.0.2-1.2.1 — 0.0.4-1.3.1
  • [mer-qdoc-template] Fix qdoc getting confused on new Qt macros.
  • [mer-qdoc-template] Install to /usr/share/mer-qdoc-template.

    mobile-broadband-provider-info

  • Updated : 20131125+git58.3-1.36.1 — 20131125+git62-1.33.1
  • [mbpi] Use PAP authentication for Beeline MMS (Russia).
  • [mbpi] Allow apn/authentication element in serviceproviders.xml
  • [mbpi] Sonera is no more. MER#902
  • [mbpi] Changed Beeline AP names to the official ones.
  • [mbpi]Added a2mobile MVNO and remove Nordisk Polska (POLAND)
  • [mbpi]Added Mobile Vikings MVNO
  • [mbpi] Housekeeping

    nemo-password-manager

  • Updated : 0.0.10-1.7.1 — 0.0.11-1.7.1
  • [password-manager] Register DBus object/service in correct order.

    nemo-qml-plugin-calendar-qt5

  • Updated : 0.2.20-1.12.2 — 0.2.21-1.10.1
  • [nemo-qml-plugin-calendar] Allow searching for imported events.

    nemo-qml-plugin-configuration-qt5

  • Updated : 0.2.0-1.12.2 — 0.2.1-1.13.1
  • [docs] Fix building documentation with Qt 5.6.

    nemo-qml-plugin-connectivity

  • Updated : 0.0.7-1.5.8 — 0.0.12-1.7.1 Binaries added : nemo-qml-plugin-connectivity-devel – 0.0.12-1.7.1 Unmet requirements: libnemoconnectivity.so.0
  • [nemo-connectivity] Expose presentSimCount.
  • [rpm] Add ldconfig post(un) calls.
  • [nemo-connectivity] Add DataConnection component.
  • [nemo-qml-plugin-connectivity] Move to Nemo.Connectivity import.
  • [connectivity] Don’t create duplicate interface objects.

    nemo-qml-plugin-dbus-qt5

  • Updated : 2.1.8-1.17.1 — 2.1.11-1.17.1
  • [nemo-qml-plugin-dbus] Warn when dbus 1.0 module is used.
  • [nemo-qml-plugin-dbus] Properly link package and .pc version.
  • [spec] Use _smp_mflags instead of jobs macro.
  • [docs] Fix building documentation with Qt 5.6.

    nemo-qml-plugin-devicelock

  • Updated : 0.2.2.3-1.9.2 — 0.2.9-1.7.1 Unmet requirements: libnemodbus.so.2
  • [devicelock] Add an option to clear external storage on device reset.
  • [devicelock] Ask user to confirm a generated code twice.
  • [devicelock] Use term security code instead of lock code.
  • [devicelock] Add a permanent manager lockout state.
  • [devicelock] Add feedback about soon to expire codes.
  • [devicelock] Introduce an option for suggesting security codes.
  • [devicelock] Reorder nemodevicelock{,-host} libraries for symbol lookup.
  • [devicelock] Don’t lock the device immediately on screen blank during a call.
  • [devicelock] Emit the locked signal if the connection to device lock is lost.

    nemo-qml-plugin-email-qt5

  • Updated : 0.2.1.1-10.4.2.jolla — 0.2.2-10.3.1.jolla
  • [nemo-qml-plugin-email] Add a test case for folder ordering in FolderListModel, contributes to MER#1778
  • [nemo-qml-plugin-email] Allow more than one level of folder nesting, fix MER#1778
  • [nemo-qml-plugin-email] Fix email account creation.

    nemo-qml-plugin-notifications-qt5

  • Updated : 1.1.0-1.17.2 — 1.1.1-1.18.1
  • [docs] Fix building documentation with Qt 5.6.

    nemo-qml-plugin-systemsettings

  • Updated : 0.2.28.2-1.38.1 — 0.2.29.1-1.38.1
  • [nemo-qml-plugin-systemsettings] Fix crash in OpenVPN file import.
  • [nemo-system-settings] Implement synchronous initialisation of LocationSettings.

    nemo-qml-plugin-thumbnailer-qt5

  • Updated : 0.3.3-1.17.2 — 0.3.5-1.18.1
  • [docs] Fix building documentation with Qt 5.6.
  • [thumbnailer] Destroy thumbailer loader alongside the window it is attached to. Fixes MER#1788

    nemo-transferengine-qt5-l10n

  • Updated : 1.21-10.17.1.jolla — 1.22-10.18.1.jolla
  • [l10n ] 7 of 7 strings translated (0 need review).

    ngfd-plugin-droid-vibrator

  • Updated : 0.91.2-10.6.2.jolla — 0.91.3-10.7.1.jolla
  • [droid-vibrator] Add support for new Android vibrator API.

    non-oss-package-groups

  • Updated : 0.9.5.1-10.69.2.jolla — 0.9.7-10.68.1.jolla
  • [patterns] Ensure libsb2 is installed in i486 build targets.
  • [patterns-non-oss] Pull in all keyboard layouts.

    ofono

  • Updated : 1.19+git7.8-1.57.2 — 1.19+git23-1.52.1
  • [ril] Block requests while UICC subscription is in progress.
  • [ril] Don’t start radio caps switch until SIM I/O calms down.
  • [ril] Handle the case of one of the SIMs missing.
  • [ril] If SET_UICC_SUBSCRIPTION times out, drop (rather than cancel) it.
  • [ril] Made GSM_GET_BROADCAST_SMS_CONFIG blocking.
  • [ril] Made PIN requests blocking.
  • [ril] Made SET_SUPP_SVC_NOTIFICATION blocking.
  • [ril] Make radio capability switch more reliable.
  • [ril] Make RIL_REQUEST_RADIO_POWER blocking.
  • [ril] Notify the UI if the capability switch transaction fails.
  • [ril] Poll data call state if DEACTIVATE_DATA_CALL request fails.
  • [ril] Serialize requests at startup.
  • [ofono] Switch USSD state from USER_ACTION to IDLE.
  • [ofono] Workaround for broken MMS proxy IP address.
  • [ril] Fixed voicecall problem introduced by commit 351ac1e9.
  • [ofono] Added ANY and NONE authentication methods.
  • [ofono] Allow to compile unit tests with coverage enabled
  • [ofono] Reset authentication method together with other context settings.
  • [ril] Respect the authentication algorithm option.
  • [rpm] Require mobile-broadband-provider-info at runtime
  • [test] Improved provisioning test coverage
  • [ofono] Expose IMEI SV via org.nemomobile.ofono.ModemManager.
  • [ril] Added SetRadioCapability config option.
  • [ril] Notify rild when we don’t need mobile data.
  • [ril] Start using SET_RADIO_CAPABILITY.
  • [ofono] debuglog plugin -> sailfish_debuglog.
  • [ofono] push-forwarder -> sailfish-pushforwarder.
  • [ofono] Renamed jolla-rilmodem configure option into sailfish-rilmodem.
  • [ofono] Renamed sailfishos configure option to sailfish-bt.
  • [ofono] Renamed Sailfish OS specific provision plugin to sailfish_provision.
  • [rpm] Drop the .changes file
  • [ril] Keep hangup D-Bus request pending until RIL hangup completes.
  • [ril] Added assert in ril_sim_card_status_parse
  • [ril] Don’t auto-select the data sim on a multisim phone.
  • [packaging] Fix passing -j to make.
  • [ril] Allow (some) DEVICE_IDENTITY requests to time out.
  • [ril] Use DEVICE_IDENTITY request instead of GET_IMEI.
  • [simfs] Prevent a crash in sim_fs_notify_file_watches.
  • [ril] Improved detection of permanently locked SIM cards.
  • [ril] Query PUK retry count.
  • [sim] Allow plugins to use puk2pin() function
  • [ril] Always refresh SIM status from query_passwd_state.
  • [ril] Housekeeping
  • [ril] Added „technologies“ configuration option.

    ohm-plugins-misc

  • Updated : 1.3.5-1.19.2 — 1.3.6-1.19.1 Binaries added : ohm-plugin-route-devel – 1.3.6-1.19.1
  • [build] Generate and install route extension files.
  • [packaging] Package new ohm-plugin-route-devel.
  • [route] Add pkgconfig file for headers.
  • [route] Move D-Bus strings to separate header.

    openobex

  • Updated : 0.1.4-1.2.4 — 0.1.4-1.3.1
  • [openobex] Fix null pointer ref and socket buffer size.
  • [packaging] Change submodule url.

    patterns-sailfish

  • Updated : 0.9.5.1-10.5.1.jolla — 0.9.7-10.3.1.jolla Unmet requirements: jolla-keyboard-layout-all
  • [patterns] Ensure libsb2 is installed in i486 build targets.
  • [patterns-non-oss] Pull in all keyboard layouts.

    patterns-sailfish-api-3

  • Updated : 1.0.7-10.1.1.jolla — 1.0.8-10.2.1.jolla
  • [packaging] Update submodule after repository move.

    profiled

  • Updated : 1.0.5-1.6.4 — 1.0.6-1.7.1
  • [systemd] Handle D-Bus autostart via systemd.

    pulseaudio-modules-droid

  • Updated : 8.0.59-10.18.2.jolla — 8.0.60-10.19.1.jolla
  • [common] Fix output channel conversion.
  • [common] Have correct type for function.
  • [sink] Fix segfault when running standalone sink.

    pulseaudio-modules-droid-sbj

  • Updated : 8.0.59-10.37.2.jolla — 8.0.60-10.38.1.jolla
  • [common] Fix output channel conversion.
  • [common] Have correct type for function.
  • [sink] Fix segfault when running standalone sink.

    pyotherside-qml-plugin-python3-qt5

  • Updated : 1.4.0-1.5.1 — 1.5.1-1.6.1
  • [pyotherside] Update to 1.5.1. Contributes to MER#1746

    qmf-activesync-plugin-l10n

  • Updated : 1.57-10.27.1.jolla — 1.58-10.28.1.jolla
  • [l10n ] 76 of 76 strings translated (0 need review).

    qmf-eas-plugin-l10n

  • Updated : 1.14-10.9.1.jolla — 1.15-10.10.1.jolla
  • [l10n ] 70 of 70 strings translated (0 need review).

    qmf-notifications-plugin-l10n

  • Updated : 1.28-10.2.1.jolla — 1.29-10.3.1.jolla
  • [l10n ] 6 of 6 strings translated (0 need review).

    qmllive-sailfish

  • Updated : 0.2.0-10.1.1.jolla — 0.2.1-10.2.1.jolla
  • [packaging] Updated URL after repository move.

    qt5

  • Updated : 5.6.2+git13-1.33.5 — 5.6.2+git16-1.35.1
  • [mer] Add an environment variable for disabling GL_BGRA use in read-pixels.
  • [mer][qtbase] Add an environment variable for disabling GL_BGRA use in read-pixels.
  • [mer][qtnetwork] Cleanup unused member variable
  • [mer][qtnetwork] Make qconnman bearer to tolerate late connman start.
  • [mer] Bring systrace up to recent api so it can work again.
  • [mer] Eliminated annoying D-Bus warning.

    qt5-feedback-haptics-droid-vibrator

  • Updated : 0.0.6-10.3.1.jolla — 0.0.7-10.8.1.jolla
  • [qt5-feedback-haptics-droid-vibrator] Add support for new Android vibrator API.
  • [qt5-feedback-haptics-droid-vibrator] Rename private variable.

    qt5-qpa-hwcomposer-plugin

  • Updated : 5.6.2.1-10.18.5.jolla — 5.6.2.2-10.19.1.jolla
  • [hwc] Ensure the vsync thread is not running after the context is destroyed.
  • [hwcomposer] Add systraces to v11.

    qt5-qtdeclarative

  • Updated : 5.6.2+git7-1.42.2 — 5.6.2+git9-1.42.1
  • [mer][qtdeclarative] Add an environment variable to disable use of BGRA textures.
  • [qtdeclarative] Add an environment variable to disable use of BGRA textures.
  • [mer] Let qtdeclarative-devel require qml-rpm-macros.
  • [mer] Let qtdeclarative require qml-rpm-macros.

    qt5-qtsensors

  • Updated : 5.2.1+git15-1.13.3 — 5.2.1+git16-1.14.1
  • [sensorfw] Fix initial proximity sensor state evaluation.

    qt5-qtwayland-wayland_egl

  • Updated : 5.4.0+git44-1.46.3 — 5.4.0+git45-1.47.1
  • [mer] Add systrace trace points in a few crucial places.

    qtscenegraph-adaptation

  • Updated : 0.6.6-10.5.3.jolla — 0.7.2-10.3.1.jolla
  • [customcontext] Make hybris textures work on devices without BGRA. MER#1760

    quick-feedback

  • Updated : 0.0.22-10.12.1.jolla — 0.0.23-10.12.1.jolla
  • [qa-feedback] Update to newer dbus module.

    sailfish-browser

  • Updated : 1.15.14-10.6.2.jolla — 1.15.16-10.4.1.jolla
  • [sailfish-browser] Reset content height based margins back when vkb margins are reset.
  • [sailfish-browser] Throttle setting of bottom margin.
  • [sailfish-browser] Fix user-agent override pattern matching.
  • [user-agent] Update preprocessed user agent overrides.
  • [user-agent] Update user-agent overrides for 38.8.0 engine.

    sailfish-browser-l10n

  • Updated : 1.113.1-10.59.1.jolla — 1.117-10.60.1.jolla
  • [l10n ] 34 of 52 strings translated (0 need review).
  • [tpl ] translation templates update for 1.15.12

    sailfish-components-accounts-qt5

  • Updated : 0.2.8-10.54.1.jolla — 0.2.8.1-10.55.1.jolla
  • [sailfish-components-accounts] Migrate to Dropbox V2 API.

    sailfish-components-accounts-qt5-l10n

  • Updated : 1.40-10.29.1.jolla — 1.42-10.31.1.jolla
  • [l10n ] 0 of 9 strings translated (0 need review).

    sailfish-components-bluetooth-qt5

  • Updated : 0.2.9-10.36.1.jolla — 0.2.10-10.37.1.jolla
  • [components-bluetooth] Use newer dbus module.

    sailfish-components-bluetooth-qt5-l10n

  • Updated : 1.53-10.30.1.jolla — 1.55-10.32.1.jolla
  • [l10n ] 34 of 34 strings translated (0 need review).

    sailfish-components-contacts-qt5-l10n

  • Updated : 1.99-10.44.1.jolla — 1.103-10.47.1.jolla
  • [l10n ] 129 of 131 strings translated (0 need review).

    sailfish-components-email-qt5

  • Updated : 0.1.0-10.16.3.jolla — 0.1.1-10.17.1.jolla
  • [components-email] Use newer DBus module version.

    sailfish-components-email-qt5-l10n

  • Updated : 1.40-10.26.1.jolla — 1.41-10.27.1.jolla
  • [l10n ] 3 of 3 strings translated (0 need review).

    sailfish-components-filemanager

  • Updated : 0.1.12.1-10.7.1.jolla — 0.1.13-10.6.1.jolla
  • [filemanager] Show the new folder option by default.

    sailfish-components-filemanager-l10n

  • Updated : 1.18-10.8.1.jolla — 1.22-10.10.1.jolla
  • [l10n ] 35 of 35 strings translated (0 need review).
  • [tpl ] translation templates update for 0.1.12
  • Updated : 1.67-10.35.1.jolla — 1.70-10.38.1.jolla
  • [l10n ] 52 of 52 strings translated (0 need review).
  • [tpl ] translation templates update for 0.1.18

    sailfish-components-pickers-qt5

  • Updated : 0.3.1-10.24.2.jolla — 0.3.2-10.25.1.jolla
  • [docs] Fix missing table of contents (QHP).

    sailfish-components-pickers-qt5-l10n

  • Updated : 1.59.1-10.34.1.jolla — 1.61-10.33.1.jolla
  • [l10n ] 33 of 33 strings translated (0 need review).

    sailfish-components-telephony-qt5-l10n

  • Updated : 1.13-10.9.1.jolla — 1.14-10.10.1.jolla
  • [l10n ] 14 of 14 strings translated (0 need review).

    sailfish-components-timezone-qt5-l10n

  • Updated : 1.44.1-10.31.1.jolla — 1.54-10.31.1.jolla
  • [l10n ] 691 of 691 strings translated (0 need review).

    sailfish-components-weather-qt5

  • Updated : 0.3.8-10.3.2.jolla — 0.3.9-10.5.1.jolla
  • [sailfish-components-weather] Use ConnectionHelper to retry model refresh after the connectivity has been established.

    sailfish-components-weather-qt5-l10n

  • Updated : 1.17-10.3.1.jolla — 1.19-10.5.1.jolla
  • [l10n ] 65 of 65 strings translated (0 need review).

    sailfish-components-webview-qt5-l10n

  • Updated : 1.7-10.5.1.jolla — 1.9-10.7.1.jolla
  • [l10n ] 37 of 37 strings translated (0 need review).
  • [tpl ] translation templates update for 0.0.17
  • [l10n ] 37 of 37 strings translated (0 need review).
  • [tpl ] translation templates update for 0.0.16

    sailfish-content-ambiences-default

  • Updated : 0.4.12-10.6.1.jolla — 0.4.13-10.7.1.jolla
  • [ssu] Use ssu-sysinfo instead of ssu dbus api.

    sailfish-content-ambiences-default-favorites

  • Updated : 0.4.12-10.2.1.jolla — 0.4.13-10.3.1.jolla
  • [ssu] Use ssu-sysinfo instead of ssu dbus api.

    sailfish-content-ambiences-default-l10n

  • Updated : 1.10.1-10.10.1.jolla — 1.11-10.10.1.jolla
  • [l10n ] 18 of 18 strings translated (0 need review).

    sailfish-content-graphics-default

  • Updated : 0.9.1-10.19.1.jolla — 0.9.2-10.18.1.jolla
  • [jolla-ambient] Use bigger camera shutter key icons.

    sailfish-devicelock-fpd

  • Updated : 0.0.6-10.4.9.jolla — 0.0.7-10.5.1.jolla Unmet requirements: libnemodbus.so.2
  • [fpd] Make it build in OBS.

    sailfish-eas

  • Updated : 0.1.28-10.13.2.jolla — 0.1.29-10.12.1.jolla
  • [sailfish-eas] Improve logging output to aid debugging.
  • [sailfish-eas] Support meeting request invitation emails.

    sailfish-maps-l10n

  • Updated : 1.65.1-10.34.1.jolla — 1.69-10.35.1.jolla
  • [l10n ] 88 of 88 strings translated (0 need review).
  • [tpl ] translation templates update for 1.1.27

    sailfish-mdm

  • Updated : 0.2.40.4-10.15.1.jolla — 0.2.49-10.4.1.jolla Unmet requirements: libnemodbus.so.2
  • [sailfish-mdm] Add value argument for PolicyValue::enforcePolicy.
  • [sailfish-mdm] Fix bug in gpsEnabledChanged reporting.
  • [sailfish-mdm] Fix build break.
  • [sailfish-mdm] AccessPolicy API should avoid tracking policy values not used by the client.
  • [sailfish-mdm] Add device reset policy.
  • [sailfish-mdm] Add internet sharing (tethering) policy.
  • [devicelock] Add an option to clear external storage on device reset.
  • [sailfish-mdm] Improve mdm-text-client.
  • [sailfish-mdm] Make nemo proxy quit when unused.

    sailfish-office-l10n

  • Updated : 1.79-10.31.1.jolla — 1.82-10.33.1.jolla
  • [l10n ] 58 of 58 strings translated (0 need review).

    sailfish-tutorial-l10n

  • Updated : 1.38.2-10.25.1.jolla — 1.43-10.26.1.jolla
  • [l10n ] 97 of 98 strings translated (0 need review).

    sailfish-version

  • Updated : 2.1.1-10.43.26.jolla — 2.1.2-10.44.3.jolla
  • [version] Change name for 2.1.2 (Kiiminkijoki).

    sailfish-weather

  • Updated : 0.2.2-10.14.1.jolla — 0.2.3-10.14.2.jolla
  • [sailfish-weather] Use newer dbus module version.

    sailfish-weather-l10n

  • Updated : 1.11-10.11.1.jolla — 1.14-10.14.1.jolla
  • [l10n ] 23 of 23 strings translated (0 need review).

    sailfishsilica-qt5

  • Updated : 0.24.20.1-10.96.2.jolla — 0.24.22-10.93.1.jolla
  • [sailfish-silica] doc: Fix supported icon sizes listing.
  • [silica] Fix quickSelect mis-firing on pull up menus.

    sailfishsilica-qt5-l10n

  • Updated : 1.81-10.46.1.jolla — 1.84-10.49.1.jolla
  • [l10n ] 81 of 82 strings translated (0 need review).
  • [tpl ] translation templates update for 0.24.18

    sbj-configs

  • Updated : 0.9.13-10.62.17.jolla — 0.10.0-10.61.4.jolla
  • [policy] Add bthfp placeholder configs.
  • [policy] Remove unused twin bthsp configs.

    sdk-deploy-rpm

  • Updated : 1.0-10.2.1.jolla — 1.0.1-10.2.1.jolla
  • [packaging] Update URL after repository move.

    sdk-harbour-rpmvalidator

  • Updated : 1.47-10.25.2.jolla — 1.47.1-10.24.1.jolla
  • [packaging] Update URL after repository move.

    sdk-setup

  • Updated : 1.0.19.1-10.16.1.jolla — 1.0.20.2-10.16.1.jolla
  • [sdk-manage] Fix usage outside of home directory.
  • [sdk-manage] Fix installing/removing toolchains.
  • [packaging] Update URL after repository move.

    sdk-statefs-providers-emu

  • Updated : 0.1-10.1.1.jolla — 0.1.1-10.2.1.jolla
  • [packaging] Fix URL after repository move.

    sdk-webapp

  • Updated : 0.6.25-10.3.2.jolla — 0.6.27-10.5.1.jolla
  • [packaging] Update URL after repository move.
  • [webapp] Fix using capitals in messages.

    sensorfw-qt5

  • Updated : 0.9.0-1.31.1 — 0.9.2.1-1.33.1
  • [hybris-adaptors] Select 1st sensor variant for each sensor type.
  • [hybris-adaptors] Use wakelock to ensure proximity data io.
  • [sensord] Use systemd notify instead of forking a daemon.
  • [sensord] Do not log successful daemon forks.
  • [systemd] Drop BusName from sensorfwd.service.

    signon-plugin-oauth2-qt5

  • Updated : 0.21.4-1.8.1 — 0.21.5-1.8.1
  • [packaging] Change submodule url.

    simkit-l10n

  • Updated : 1.33-10.21.1.jolla — 1.35-10.23.1.jolla
  • [l10n ] 14 of 14 strings translated (0 need review).

    sociald

  • Updated : 0.1.61-10.27.1.jolla — 0.1.62.1-10.29.1.jolla
  • [buteo-sync-plugins-social] Update Dropbox Backup plugin to V2 API.
  • [buteo-sync-plugins-google] Extract attendee information in gcal sync.
  • [buteo-sync-plugins-social] Store GCal ID in custom property.
  • [spec] Use _smp_mflags instead of jobs macro.

    ssu

  • Updated : 0.42.2-1.35.9 — 0.43.0-1.36.1
  • [ssu] Use consistently const QString & on interfaces.
  • [ssucli] Improve warnings when D-Bus is unavailable.

    store-client

  • Updated : 0.11.27-10.98.2.jolla — 0.11.28-10.96.1.jolla
  • [store-client] Release cover image for 2.1.2.

    store-client-l10n

  • Updated : 1.113.1-10.54.1.jolla — 1.116-10.55.1.jolla
  • [l10n ] 154 of 154 strings translated (0 need review).
  • [tpl ] translation templates update for 0.11.26

    swi-prolog

  • Updated : 5.6.50-1.2.6 — 5.6.50-1.3.1
  • [packaging] change upstream to use git://
  • [packaging] Change submodule to merproject mirror.

    systemd

  • Updated : 225+git3.1-1.17.3 — 225+git5-1.15.1
  • [pam_systemd] Add timeout=seconds argument.
  • [systemd] Add explicit disables for things that were disabled on clean builds.
  • [systemd] Drop: machined and importd.
  • [systemd] Drop: nss-myhostname, sysv init compat, hibernate.
  • [systemd] Drop: quotacheck, firstboot, backlight.
  • [systemd] Drop: timedated, localed, networkd.
  • [systemd] Drop: zsh completions.
  • [update] Update to systemd version 208.
  • [rpm macros] support old rpm macro location
  • [packaging] bootchart.conf moved to systemd-config-mer package
  • [new-patch] Added support to configurable timemouts and startlimits
  • [tests] Update tests.xml to match systemd version 208 tests
  • [packaging] dropped x permissions from normal user for systemctl-user command
  • [new-patch] Added systemd-208-fix-restart.patch to fix restart logic
  • [patch] Added systemd-208-count-only-restarts.patch
  • [patch] Add do-not-pull-4-megs-from-stack-for-journal-send-test patch
  • [packaging] Own systemd install directories.
  • [patch] Support additional argument in reboot
  • [patch] Remove unused systemd-187-reintroduce-support-for-deprecated-oom.patchpatch
  • [patch] Add patch from upstream: Don’t wait for new data from the sensor
  • [systemd] Fix potential boot delay and cause for boot failures. Fixes MER#1088
  • [packaging] Add libtool to BuildRequires in .spec.
  • [PATCH] [packaging] Add libtool to BuildRequires in .spec.
  • [packaging] Fix wrong months in systemd.changes.
  • [bootchart] Add upstream patch to fix bootchart crash.
  • [spec] Add psmisc dependecy because of used pidof tool.
  • [systemd] Add ./.libs to library linking path. Fixes MER#1612
  • [systemd] Add ./.libs to library linking path. Fixes MER#1612
  • [packaging] Drop unneeded usbutils build dep.
  • [packaging] Drop unneeded usbutils build dep.

    transferengine-plugins

  • Updated : 0.1.8-10.47.1.jolla — 0.1.8.1-10.48.1.jolla
  • [transfer-engine-plugins] Migrate Dropbox to V2 API.

    transferengine-plugins-l10n

  • Updated : 1.76-10.44.1.jolla — 1.78-10.46.1.jolla
  • [l10n ] 64 of 64 strings translated (0 need review).

    usb-moded

  • Updated : 0.86.0+mer13-1.31.1 — 0.86.0+mer15.1-1.33.1
  • [debug] Do diagnostic logging for each D-Bus signal broadcast
  • [debug] Optionally include file/line/function info when logging to stderr
  • [modesetting] Write dummy value to clear ffs function list.
  • [dsme] Avoid recursion during dsmesock disconnecting.
  • [android] Get usb serial number from kernel command line.
  • [dsme] Enlist as dsme process watchdog client.
  • [dsme] Verify modesettings on each processwd heartbeat.
  • [modesetting] Do not use „none“ as usb function
  • [modesetting] Log origin of sysfs writes in debug verbosity.
  • [modesetting] Track expected sysfs control file content.
  • [packaging] Adjust libsystemd build requirements
  • [usb-moded] Do not redirect stderr to /dev/null when logging to stderr

    voicecall-ui-jolla

  • Updated : 0.10.9.1-10.79.2.jolla — 0.10.11-10.78.2.jolla
  • [voicecall-ui-jolla] Make the dismiss action clearly visible on the call ended view.
  • [voicecall-ui] Add Dialog to CallPrompt component name
  • [voicecall-ui-jolla] Ask user to reboot device after rild restart.

    voicecall-ui-jolla-l10n

  • Updated : 1.150.1-10.70.1.jolla — 1.151-10.68.1.jolla
  • [l10n ] 199 of 199 strings translated (0 need review).
  • [tpl ] translation templates update for 0.10.11 Packages added (7)(toggle all)

    droid-config-f5121

  • Binaries added : droid-config-f5121-pulseaudio-settings – 0.0.38-10.6.6.jolla, droid-config-f5121-patterns – 0.0.38-10.6.6.jolla, droid-config-f5121-bluez5 – 0.0.38-10.6.6.jolla, droid-config-f5121-bluez4 – 0.0.38-10.6.6.jolla, droid-config-f5121-policy-settings – 0.0.38-10.6.6.jolla, droid-config-f5121 – 0.0.38-10.6.6.jolla, droid-config-f5121-preinit-plugin – 0.0.38-10.6.6.jolla, droid-config-f5121-out-of-image-files – 0.0.38-10.6.6.jolla, droid-config-f5121-sailfish – 0.0.38-10.6.6.jolla, droid-config-f5121-kickstart-configuration – 0.0.38-10.6.6.jolla, droid-config-f5121-ssu-kickstarts – 0.0.38-10.6.6.jolla, droid-config-f5121-flashing – 0.0.38-10.6.6.jolla
  • Unmet requirements: f5121-bluez-configs, config(droid-config-f5121) = 0.0.38-10.6.6.jolla, droid-config-f5121 = 0.0.38-10.6.6.jolla, droid-config-f5121 = 0.0.38
  • [f5121] Do not filter lid sensor reporting based on als state.
  • [f5121] Replace CUSTOMCONTEXT_NO_BGRA with QT_OPENGL_NO_BGRA.
  • [f5121] Ensure make_ext4fs is executable.
  • [f5121] Relax upstream versioning.
  • [sensors] Re-enable Hall sensor as f5121 really does have one.
  • [mce] Add doubletap configuration file for f5121.
  • [mce] Add doubletap settings file for f5121.
  • [f5121] Add aliendalvik-feature to suggested feature.
  • [theme] Increase launcher icon size and sync pixel ratios.
  • [touch] Automatically scale start drag distance if pixel ratio is known.
  • [upstream] Update latest droid-configs-device
  • [f5121] Add apkd-config-home to pattern.
  • [f5121] Include f_bcmdhd_apsta.bin and fw_bcmdhd.bin binaries to image.
  • [f5121] Move vendor mounting systemd link to the right place.
  • [f5121] Make binary blobs from the zip file executable.
  • [f5121] Prevent future droid-system updates from failing with „Read-only file system“.
  • [f5121] Install the mount unit properly.
  • [f5121] Provide make_ext4fs separately due to conflict with package’s noarch.
  • [f5121] Fix OBS build.
  • [camera] Higher camera resolutions enabled with v11 blobs.
  • [f5121] Generate oem.img from SW binaries and flash it to cache partition.
  • [f5121] Mount cache under /system/vendor.
  • [droid-configs-device] Upgrade latest upstream version
  • [zypp] Prevent removing main HA packages.
  • [f5121] Add factory reset support F5121.
  • [shutdown] Update droid-configs-device for droid-hal-init shutdown.
  • [f5121] Improve vkb haptics.
  • [camera] Default front 4:3 viewfinder resolution had a green bar.
  • [camera] Enable flashlight.
  • [camera] Set a default front 4:3 viewfinder resolution that doesn’t show a green bar at the edge.
  • [sensors] Disable Hall sensor as f5121 doesn’t actually have one.
  • [wlan] Systemd service for macaddrsetup. Bring wlan0 up before connman starts so the change takes effect.
  • [f5121] Provide root readable screen configurations.
  • [f5121] Fix mute phonecall issue.
  • [f5121] Make hybris textures work on devices without BGRA.
  • [obs] Take products from OBS :dhd subproject.
  • [camera] 8mpix configuration.
  • [camera] 8mpix configuration.
  • [f5121] Initial CSD hw-settings.
  • [f5121] Initial CSD hw-settings.
  • [f5121] Remove custom hangup reasons.
  • [f5121] Add remote hangup reason.
  • [patterns] Add everything that upstream libhybris gives, for now.
  • [camera] Add better viewfinder resolution.
  • [f5121] Add jolla store apps by default on imager.
  • [f5121] Add more flashing instructions.
  • [camera] Initial camera configs.
  • [f5121] Add pulseaudio and gstreamer droid packages to hw pattern.
  • [f5121] Use Sony vendor id on flashing script.
  • [f5121] Fix typo in kickstart attachment.
  • [f5121] Initial kickstart configuration with LVM.
  • [dhc] Update upstream droid-hal-configs
  • [f5121] Add usb config files.
  • [f5121] Clean up patterns according to droid-configs upstream template.
  • [f5121] Add GPS packages to the patterns.
  • [f5121] Clean up GStreamer 0.10 packages from pattern.
  • [f5121] Clean up usb-moded configs.
  • [f5121] Provide ofono-configs.
  • [f5121] Update upstream droid-configs-device
  • [f5121] Add csd and sd-utils to pattern.
  • [f5121] Add ofono config.
  • [f5121] Add symbolic link to android sensors configs.
  • [f5121] Add udev rule for /dev/block/bootdevice.
  • [f5121] Add udev rule for touch driver.
  • [dcd] Patterns and compositor config

    droid-hal-f5121

  • Binaries added : droid-hal-f5121 – 0.1.5-10.1.1.jolla, droid-hal-f5121-kernel-modules – 0.1.5-10.1.1.jolla, droid-hal-f5121-tools – 0.1.5-10.1.1.jolla, droid-hal-f5121-kernel – 0.1.5-10.1.1.jolla, droid-hal-f5121-detritus – 0.1.5-10.1.1.jolla, droid-hal-f5121-devel – 0.1.5-10.1.1.jolla
  • Unmet requirements: droid-hal-f5121-detritus
  • [f5121-kernel_sony_msm] Add Android logger driver.
  • [f5121-kernel_sony_msm] Add bolek’s extra fs modules.
  • [f5121-kernel_sony_msm] Add getrandom and memfd_create syscall for arm32.
  • [f5121-kernel_sony_msm] Enable Android logger driver.
  • [f5121-system_core] Add late-init to get charging UI in acting dead mode.
  • [manifest] Update to include wlan mac and shutdown fixes.
  • [blobs] Updated from public SW_binaries_for_Xperia_AOSP_M_MR1_v10.
  • [f5121] Use upstream broadcom/wlan.
  • [f5121][kernel] Re-enable IKCONFIG.
  • [blobs] Updated for public SW_binaries_for_Xperia_AOSP_M_MR1_v10.
  • [f5121] Add nxpnfcc_fw
  • [f5121] New BSP (android-6.0.1_r79 + Sony repos and patches 20170510).
  • [bionic] (hybris) Allow libc.so to be initialized from libhybris.
  • [dhd] Fix case of lunch combo and device names being different.
  • [dhd] Correct Java compiler version for OBS.
  • [dhd] Fix OBS build.
  • [dhd] Switch SW binaries to v10.
  • [f5121] Add busybox
  • [f5121] Make into the droid-hal manifest

    droid-hal-f5121-img-boot

  • Binaries added : droid-hal-f5121-img-recovery – 3.10.84.20170220.1-10.2.2.jolla, droid-hal-f5121-img-boot – 3.10.84.20170220.1-10.2.2.jolla
  • Unmet requirements: droid-config-f5121-flashing
  • [f5121] Initial packaging of droid-hal-img-boot.

    droid-hal-prjconf-f5121

  • Binaries added : droid-hal-prjconf-f5121 – 0.0.3-10.2.1.jolla
  • [prjconf] Resolve droid-glibc-tools by default.
  • [prjconf] Resolve droid-config-f5121-bluez5 by default.
  • [CM] Add prjconf for f5121.

    droid-hal-version-f5121

  • Binaries added : droid-hal-version-f5121-doc – 0.0.1-10.2.12.jolla, droid-hal-version-f5121 – 0.0.1-10.2.12.jolla
  • Unmet requirements: config(droid-hal-version-f5121) = 0.0.1-10.2.12.jolla
  • [dvd] Initial content.

    droid-src-f5121

  • Binaries added : droid-src-f5121-vendor – 0.0.1-10.1.1.jolla, droid-src-f5121-bionic – 0.0.1-10.1.1.jolla, droid-src-f5121-prebuilts-sdk – 0.0.1-10.1.1.jolla, droid-src-f5121-system – 0.0.1-10.1.1.jolla, droid-src-f5121-external – 0.0.1-10.1.1.jolla, droid-src-f5121-libcore – 0.0.1-10.1.1.jolla, droid-src-f5121-kernel – 0.0.1-10.1.1.jolla, droid-src-f5121-bootable – 0.0.1-10.1.1.jolla, droid-src-f5121-dhs-utils – 0.0.1-10.1.1.jolla, droid-src-f5121-abi – 0.0.1-10.1.1.jolla, droid-src-f5121-frameworks – 0.0.1-10.1.1.jolla, droid-src-f5121-device – 0.0.1-10.1.1.jolla, droid-src-f5121-prebuilts-misc – 0.0.1-10.1.1.jolla, droid-src-f5121-hardware – 0.0.1-10.1.1.jolla, droid-src-f5121-dhs-full – 0.0.1-10.1.1.jolla, droid-src-f5121-prebuilts-tools – 0.0.1-10.1.1.jolla, droid-src-f5121-dhs-rootdir – 0.0.1-10.1.1.jolla, droid-src-f5121-dhs-makefile – 0.0.1-10.1.1.jolla, droid-src-f5121-prebuilts-clang-linux-x86 – 0.0.1-10.1.1.jolla, droid-src-f5121-build – 0.0.1-10.1.1.jolla, droid-src-f5121-prebuilts-gcc-linux-x86 – 0.0.1-10.1.1.jolla, droid-src-f5121-libnativehelper – 0.0.1-10.1.1.jolla, droid-src-f5121-prebuilts-ndk – 0.0.1-10.1.1.jolla
  • [f5121] Add droid-src repo as rpm/.

    droid-system-f5121

  • Binaries added : droid-system-f5121 – 0.0.3.1-10.3.1.jolla
  • [f5121] Built with latest sony repos (incl new bt-fm) and no blobs.
  • [system] Rebuilt on latest BSP.
  • [f5121] Update system files under sparse directory from system image built with Sony v10 blobs. Minimal manifest for Sailfish build.